Non-contact online thickness measurement system for metal films based on eddy current sensing with distance tracking technique.

This paper proposes an online, non-contact metal film thickness measurement system based on eddy current sensing. The slope of the lift-off curve (LOC) is used for characterizing target thickness. Theoretical derivation was conducted to prove that the slope is independent of the lift-off variation. In practice, the measurement has some immunity to the lift-off, but not perfect. The slope of LOC is still affected at some extent by the lift-off. Hence, a height tracking system was also proposed, which could stabilize the distance between the sensor and the target and significantly reduce the lift-off effect. The height tracking system contains a specially designed probe, which could vibrate rapidly to obtain a fast measurement speed, and its height can be adjusted up and down continuously to stabilize the lift-off. The sensor coil in the thickness measurement system was also used as the height sensor in the height tracking system. Several experiments were conducted to test the system performances under static and dynamic conditions. This measurement system demonstrated significant advantages, such as simple and clear conversion between the slope of LOC and target thickness, high resolution and stability, and minimized effect of lift-off variation.

[1]  Yonggang Meng,et al.  Improvement of sensitivity of eddy current sensors for nano-scale thickness measurement of Cu films , 2014 .

[2]  Zhihua Feng,et al.  Ultrahigh-resolution and non-contact diameter measurement of metallic wire using eddy current sensor. , 2014, The Review of scientific instruments.

[3]  Cevdet Akyel,et al.  Improvement in calculation of the self- and mutual inductance of thin-wall solenoids and disk coils , 2000 .

[4]  Wei Li,et al.  Noncontact Thickness Measurement of Metal Films Using Eddy-Current Sensors Immune to Distance Variation , 2015, IEEE Transactions on Instrumentation and Measurement.

[5]  Xinchun Lu,et al.  In-situ measurement of Cu film thickness during the CMP process by using eddy current method alone , 2013 .

[6]  Artur Lopes Ribeiro,et al.  The Lift-Off Effect in Eddy Currents on Thickness Modeling and Measurement , 2013, IEEE Transactions on Instrumentation and Measurement.

[7]  Stoyan N. Nihtianov,et al.  Eddy-Current Sensor Interface for Advanced Industrial Applications , 2011, IEEE Transactions on Industrial Electronics.

[8]  Gui Yun Tian,et al.  Reduction of lift-off effects for pulsed eddy current NDT , 2005 .

[9]  Kai Xu,et al.  A Novel Triple-Coil Electromagnetic Sensor for Thickness Measurement Immune to Lift-Off Variations , 2016, IEEE Transactions on Instrumentation and Measurement.

[10]  M. R. Nabavi,et al.  Design Strategies for Eddy-Current Displacement Sensor Systems: Review and Recommendations , 2012, IEEE Sensors Journal.

[11]  Catalin Mandache,et al.  Transient and harmonic eddy currents: Lift-off point of intersection , 2006 .

[12]  H. Geirinhas Ramos,et al.  Liftoff insensitive thickness measurement of aluminum plates using harmonic eddy current excitation and a GMR sensor , 2012 .

[13]  D. Davidov,et al.  High-frequency eddy-current technique for thickness measurement of micron-thick conducting layers , 2001 .

[14]  Yann Le Bihan,et al.  Study on the transformer equivalent circuit of eddy current nondestructive evaluation , 2003 .

[15]  CheolGi Kim,et al.  Differential pulsed eddy current sensor for the detection of wall thinning in an insulated stainless steel pipe , 2010 .

[16]  Toh-Ming Lu,et al.  Development of an in-line X-ray reflectivity technique for metal film thickness measurement , 2001 .

[17]  Ermanno Pinotti,et al.  Simple Lock-In Technique for Thickness Measurement of Metallic Plates , 2014, IEEE Transactions on Instrumentation and Measurement.

[18]  Matthew J. Banet,et al.  Thickness measurement for Cu and Ta thin films using optoacoustics , 2000, Proceedings of the IEEE 2000 International Interconnect Technology Conference (Cat. No.00EX407).

[19]  Raphaël Romary,et al.  Stator-Interlaminar-Fault Detection Using an External-Flux-Density Sensor , 2010, IEEE Transactions on Industrial Electronics.

[20]  Nicola Bowler,et al.  Electrical conductivity measurement of metal plates using broadband eddy-current and four-point methods , 2005 .

[21]  Javier García-Martín,et al.  Non-Destructive Techniques Based on Eddy Current Testing , 2011, Sensors.

[22]  Wuliang Yin,et al.  Thickness measurement of non-magnetic plates using multi-frequency eddy current sensors , 2007 .

[23]  Zhihua Feng,et al.  Ultrastable and highly sensitive eddy current displacement sensor using self-temperature compensation , 2013 .