Effect of humidity during manufacturing on the interfacial strength of non-pre-dried flax fibre/unsaturated polyester composites

[1]  C. V. Dijk Removing barriers for bio-based composite production with novel water-insensitive cure systems , 2015 .

[2]  D. Blond,et al.  Effects of the hygrothermal environment on the mechanical properties of flax fibres , 2014 .

[3]  M. Miao,et al.  Effects of humidity conditions at fabrication on the interfacial shear strength of flax/unsaturated polyester composites , 2014 .

[4]  P. A. Smith,et al.  Green composites: sustainability and mechanical performance , 2013 .

[5]  B. Riedl,et al.  Contact Angle on Two Canadian Woods: Influence of Moisture Content and Plane of Section , 2013 .

[6]  E. Chibowski,et al.  Effect of Relative Humidity on Contact Angle and its Hysteresis on Phospholipid DPPC Bilayer Deposited on Glass , 2013 .

[7]  Ignace Verpoest,et al.  Effect of physical adhesion on mechanical behaviour of bamboo fibre reinforced thermoplastic composites , 2013 .

[8]  Roel Zuijderduin,et al.  Cobalt-free curing taking off , 2013 .

[9]  I. Verpoest,et al.  Interfaces in natural fibre composites: effect of surface energy and physical adhesion , 2012 .

[10]  Stefanie Christiaens Process-structure-function relations of pectin in plant-based foods : the use of anti-homogalacturonan antibodies in an integrated methodological approach , 2012 .

[11]  V. Placet,et al.  Influence of environmental relative humidity on the tensile and rotational behaviour of hemp fibres , 2012, Journal of Materials Science.

[12]  I. Verpoest,et al.  Wetting behaviour and surface properties of technical bamboo fibres , 2011 .

[13]  L. Mattoso,et al.  Studies on the thermal properties of sisal fiber and its constituents , 2010 .

[14]  Haiping Yang,et al.  Characteristics of hemicellulose, cellulose and lignin pyrolysis , 2007 .

[15]  Y. Grohens,et al.  Influence of chemical treatments on surface properties and adhesion of flax fibre-polyester resin , 2006 .

[16]  S. K. Batra 8 Other Long Vegetable Fibers*: Abaca, Banana, Sisal, Henequen, Flax, Ramie, Hemp, Sunn, and Coir , 2006 .

[17]  EJ Eero Kontturi Surface chemistry of cellulose : from natural fibres to model surfaces , 2005 .

[18]  J. Nairn Generalized Shear-Lag Analysis Including Imperfect Interfaces , 2004 .

[19]  D. Maniglio,et al.  Recent theoretical and experimental advancements in the application of van Oss–Chaudury–Good acid–base theory to the analysis of polymer surfaces I. General aspects , 2003 .

[20]  B. Sundberg,et al.  XPS study of living tree , 2002 .

[21]  O. R. Yurkevich,et al.  Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part I: local bond strength , 2002 .

[22]  E. de Jong,et al.  Analysis of retted and non retted flax fibres by chemical and enzymatic means. , 2001, Journal of biotechnology.

[23]  S. Barsberg,et al.  Nonequilibrium Phenomena Influencing the Wetting Behavior of Plant Fibers. , 2001, Journal of colloid and interface science.

[24]  H. Militz,et al.  Surface Energy Determinations of Wood: Comparison of Methods and Wood Species , 2000 .

[25]  Edith Mäder,et al.  Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Part II. Crack propagation: Effect of friction on force-displacement curves , 2000 .

[26]  C. Baillie,et al.  Interfacial characterisation of flax fibre‐thermoplastic polymer composites by the pull‐out test , 1999 .

[27]  A. Błędzki,et al.  Composites reinforced with cellulose based fibres , 1999 .

[28]  Per Stenius,et al.  Evaluation of surface lignin on cellulose fibers with XPS , 1999 .

[29]  D. M. Bruce,et al.  Effect of Environmental Relative Humidity and Damage on the Tensile Properties of Flax and Nettle Fibers , 1998 .

[30]  C. Hill,et al.  A study of the potential of acetylation to improve the properties of plant fibres , 1998 .

[31]  B. Lauke,et al.  Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Part I. Crack initiation: stress-controlled or energy-controlled? , 1997 .

[32]  C. V. Oss,et al.  Interfacial Forces in Aqueous Media , 1994 .