Application of the Symmetric Model to the Design Optimization of Fan Outlet Grills

In this study, different designs of the opening pattern of computer fan grills were investigated. The objective of this study was to propose a simulation analysis and compare it to the experimental results for a set of optimized fan designs. The FLUENT computational fluid dynamics (CFD) simulation software was used to analyze the fan blade flow. The experimental results obtained by the simulation analysis of the optimized fan designs were analyzed and compared. The effect of different opening pattern designs on the resulting airflow rate was investigated. Six types of fans with different grills were analyzed. The airflow velocity distribution in the simulated flow channel indicated that the wind speed efficiency of the fan and its influence were comparable with the experimental model. The air was forced by the fan into the air duct. The flow path was separately measured by analog instruments. The three-dimensional flow field was determined by performing a wind speed comparison on nine planes containing the mainstream velocity vector. Moreover, the three-dimensional curved surface flow field at the outlet position and the highest fan rotation speed were investigated. The air velocity distribution at the inlet and the outlet of the fan indicated that among the air outlet opening designs, the honeycomb shaped air outlet displayed the optimal performance by investigating the fan characteristics and the estimated wind speed efficiency. These optimized designs were the most ideal configurations to compare these results. The air flow rate was evenly distributed at the fan inlet.

[1]  Detlev G. Kröger,et al.  Contributors to increased fan inlet temperature at an air-cooled steam condenser , 2013 .

[2]  F. Bakir,et al.  Experimental and numerical study of the sweep effect on three-dimensional flow downstream of axial flow fans , 2010 .

[3]  Vittorio Betta,et al.  Fluid dynamic performances of traditional and alternative jet fans in tunnel longitudinal ventilation systems , 2010 .

[4]  Farid Bakir,et al.  Experimental investigations on the wall pressure measurement on the blade of axial flow fans , 2012 .

[5]  Andrea Toffolo.  On the theoretical link between design parameters and performance in cross-flow fans: a numerical and experimental study , 2005 .

[6]  Zhaohui Du,et al.  Numerical prediction of the interaction noise radiated from an axial fan , 2013 .

[7]  E. Walsh,et al.  The effect of global cross flows on the flow field and local heat transfer performance of miniature centrifugal fans , 2012 .

[8]  Jinju Sun,et al.  Prediction and measurement of axial flow fan aerodynamic and aeroacoustic performance in a split-type air-conditioner outdoor unit , 2013 .

[9]  Sheam-Chyun Lin,et al.  An integrated performance analysis for a backward-inclined centrifugal fan , 2012 .

[10]  Sergio Marinetti,et al.  Air velocity distribution analysis in the air duct of a display cabinet by PIV technique , 2012 .

[11]  E. Walsh,et al.  Local heat transfer performance and exit flow characteristics of a miniature axial fan , 2010 .

[12]  Hsin-Hung Lin,et al.  Automobile shape formation and simulation by a computer-aided systematic method , 2016, Concurr. Eng. Res. Appl..

[13]  Detlev G. Kröger,et al.  Numerical investigation of fan performance in a forced draft air-cooled steam condenser , 2006 .

[14]  T. W. von Backström,et al.  Effect of cross-flow on the performance of air-cooled heat exchanger fans , 2002 .

[15]  Pietro Giannattasio,et al.  Experimental study of the three-dimensional flow field in cross-flow fans , 2011 .

[16]  D. Greenblatt,et al.  Computer fan performance enhancement via acoustic perturbations , 2012 .

[17]  Mingsheng Liu,et al.  Development of simplified in-situ fan curve measurement method using the manufacturers fan curve , 2012 .

[18]  T. Y. Chen,et al.  Flow structures and heat transfer characteristics in fan flows with and without delta-wing vortex generators , 2004 .

[19]  Martine Baelmans,et al.  Numerical and experimental study of a cross-flow fan for combine cleaning shoes , 2010 .

[20]  Wang Zhong-qi,et al.  Experimental Study of Bowed-twisted Stators in an Axial Transonic Fan Stage , 2009 .

[21]  Thomas Carolus,et al.  Axial flow fan broad-band noise and prediction , 2007 .

[22]  R. Grimes,et al.  Flat plate heat transfer with impinging axial fan flows , 2010 .

[23]  Wook Kim,et al.  Development of algorithm based on the coupling method with CFD and motor test results to predict performance and efficiency of a fuel cell air fan , 2012 .

[24]  Yang-Cheng Shih,et al.  On similitude of the cross flow fan in a split-type air-conditioner , 2008 .

[25]  Hsin-Hung Lin.  Improvement of Human Thermal Comfort by Optimizing the Airflow Induced by a Ceiling Fan , 2019, Sustainability.

[26]  Shih-Wen Hsiao,et al.  A study of thermal comfort enhancement by the optimization of airflow induced by a ceiling fan , 2016 .

[27]  Jan Carmeliet,et al.  Numerical modeling of the flow conditions in a closed-circuit low-speed wind tunnel , 2006 .

[28]  Martine Baelmans,et al.  Effect of a cross-flow opening on the performance of a centrifugal fan in a combine harvester: Computational and experimental study , 2010 .

[29]  R. Huang,et al.  Computational and experimental investigations of performance curve of an axial flow fan using downstream flow resistance method , 2010 .

[30]  Li Chunxi,et al.  The performance of a centrifugal fan with enlarged impeller , 2011 .

[31]  Shih-Wen Hsiao,et al.  A study of the evaluation of products by industrial design students , 2017 .

[32]  P. Verboven,et al.  Modelling and validation of the air flow generated by a cross flow air sprayer as affected by travel speed and fan speed , 2005 .

[33]  Hua Ouyang,et al.  Internal flow Mechanism and Experimental Research of low Pressure Axial fan with Forward-Skewed Blades , 2008 .