Integrated common mode and differential mode inductors with low near magnetic field emission

The paper investigates the near magnetic field performance of integrated CM and DM inductors. The reluctance model is developed for near magnetic field analysis. Based on the analysis, several integrated inductor structures using commercial EE/EI cores to achieve low near magnetic field emission are proposed. Simulations and experiments were conducted to verify the proposed inductor structures.

[1]  Shuo Wang,et al.  Effects of parasitic parameters on EMI filter performance , 2004 .

[2]  D. Boroyevich,et al.  Influence of high-frequency near-field coupling between magnetic components on EMI filter design , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[3]  Wei Chen,et al.  Near Field Coupling Effects on Conducted EMI in Power Converter , 2006 .

[4]  Huan Zhang,et al.  Common-Mode EMI Noise Modeling and Reduction With Balance Technique for Three-Level Neutral Point Clamped Topology , 2017, IEEE Transactions on Industrial Electronics.

[5]  M. J. Nave,et al.  On modeling the common mode inductor , 1991, IEEE 1991 International Symposium on Electromagnetic Compatibility.

[6]  C. Labarre,et al.  Circuit Analysis of an EMI Filter for the Prediction of its Magnetic Near-Field Emissions , 2012, IEEE Transactions on Electromagnetic Compatibility.

[8]  Yang Yugang,et al.  A Common Mode and Differential Mode Integrated EMI Filter , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[9]  Wenhua Tan,et al.  A Common-Mode Choke Using Toroid-EQ Mixed Structure , 2013, IEEE Transactions on Power Electronics.

[10]  S. Guttowski,et al.  Predicting parasitics and inductive coupling in EMI-filters , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[11]  Jean-Michel Guichon,et al.  Automatic layout optimization of an EMC filter , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[12]  Yongbin Chu,et al.  A Common Mode Inductor With External Magnetic Field Immunity, Low-Magnetic Field Emission, and High-Differential Mode Inductance , 2015, IEEE Transactions on Power Electronics.

[13]  C. Vollaire,et al.  Near Magnetic Field Coupling Prediction Using Equivalent Spherical Harmonic Sources , 2014, IEEE Transactions on Electromagnetic Compatibility.

[14]  Huan Zhang,et al.  Two-Capacitor Transformer Winding Capacitance Models for Common-Mode EMI Noise Analysis in Isolated DC–DC Converters , 2017, IEEE Transactions on Power Electronics.

[15]  D. Boroyevich,et al.  An integrated common mode and differential mode choke for EMI suppression using magnetic epoxy mixture , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[16]  Dehong Xu,et al.  Design, Modeling, and Improvement of Integrated EMI Filter With Flexible Multilayer Foils , 2011, IEEE Transactions on Power Electronics.

[17]  J. Roudet,et al.  Determination of the layout influence on the effectiveness of a three-phase common mode filter by using equivalent circuits and PSpice , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[18]  J.D. van Wyk,et al.  Improving the Characteristics of integrated EMI filters by embedded conductive Layers , 2005, IEEE Transactions on Power Electronics.

[19]  D. Boroyevich,et al.  An Integrated EMI Choke for Differential-Mode and Common-Mode Noise Suppression , 2010, IEEE Transactions on Power Electronics.

[20]  Shuo Wang,et al.  A compensation winding structure for balanced three-phase coupled inductor , 2017, 2017 IEEE Applied Power Electronics Conference and Exposition (APEC).

[21]  Hans Ertl,et al.  EMI Filter Design for a 1 MHz, 10 kW Three-Phase/Level PWM Rectifier , 2011, IEEE Transactions on Power Electronics.

[22]  J.D. Van Wyk,et al.  Developing parasitic cancellation technologies to improve EMI filter performance for switching mode power supplies , 2005, IEEE Transactions on Electromagnetic Compatibility.