Regulating twin boundary mobility by annealing in magnesium and its alloys

[1]  H. Kim,et al.  Failure prediction of AZ31B magnesium alloy sheet based on a micro-mechanical void model incorporating the asymmetric plasticity constitutive law , 2017 .

[2]  Yunping Li,et al.  Impact of solute elements on detwinning in magnesium and its alloys , 2017 .

[3]  J. Robson.  The effect of internal stresses due to precipitates on twin growth in magnesium , 2016 .

[4]  K. An,et al.  Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys , 2016 .

[5]  A. Wilkinson,et al.  On the effects of reorientation and shear transfer during twin formation: Comparison between high resolution electron backscatter diffraction experiments and a crystal plasticity finite element model , 2016 .

[6]  B. Rolfe,et al.  Theoretical study on the {1¯012} deformation twinning and cracking in coarse-grained magnesium alloys , 2016 .

[7]  Ju Li,et al.  Shuffling-controlled versus strain-controlled deformation twinning: The case for HCP Mg twin nucleation , 2016 .

[8]  H. Takuda,et al.  Deformation behavior upon two-step loading in a magnesium alloy sheet , 2016 .

[9]  S. Agnew,et al.  Dislocation transmutation by tension twinning in magnesium alloy AZ31 , 2016 .

[10]  I. Beyerlein,et al.  Stress and strain relaxation in magnesium AZ31 rolled plate: In-situ neutron measurement and elastic viscoplastic polycrystal modeling , 2016 .

[11]  Jian Lu,et al.  Formation of a new incoherent twin boundary in a Mg–3Gd alloy , 2016 .

[12]  P. Lukáč,et al.  Modeling of the work hardening in magnesium alloy sheets , 2016 .

[13]  Ji Hoon Kim,et al.  Cyclic behavior of AZ31B Mg: Experiments and non-isothermal forming simulations , 2015 .

[14]  Huihui Yu,et al.  The different effects of solute segregation at twin boundaries on mechanical behaviors of twinning and detwinning , 2015 .

[15]  S. Lee,et al.  Twinning-Detwinning Behavior during Cyclic Deformation of Magnesium Alloy , 2015 .

[16]  Yuichiro Koizumi,et al.  Enhanced damping capacity of magnesium alloys by tensile twin boundaries , 2015 .

[17]  Akhtar S. Khan,et al.  Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions , 2015 .

[18]  Somnath Ghosh,et al.  A crystal plasticity FE model for deformation with twin nucleation in magnesium alloys , 2015 .

[19]  D. L. Chen,et al.  Influence of aluminum content on twinning and texture development of cast Mg–Al–Zn alloy during compression , 2015 .

[20]  R. Lebensohn,et al.  Numerical study of the stress state of a deformation twin in magnesium , 2015 .

[21]  S. Agnew,et al.  Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading , 2015 .

[22]  M. Ghazisaeidi,et al.  A new mechanism for twin growth in Mg alloys , 2014 .

[23]  D. Sarker,et al.  Influence of pre-deformation and subsequent annealing on strain hardening and anisotropy of AM30 magnesium alloy , 2014 .

[24]  Jing Zhang,et al.  Twin-boundary segregation energies and solute-diffusion activation enthalpies in Mg-based binary systems: A first-principles study , 2014 .

[25]  Yunping Li,et al.  Detwining in Mg alloy with a high density of twin boundaries , 2014, Science and technology of advanced materials.

[26]  I. Beyerlein,et al.  Reactions of lattice dislocations with grain boundaries in Mg: Implications on the micro scale from atomic-scale calculations , 2014 .

[27]  M. Worswick,et al.  Mechanical response of AZ31B magnesium alloy: Experimental characterization and material modeling considering proportional loading at room temperature , 2014 .

[28]  Yanyao Jiang,et al.  An experimental study of cyclic plastic deformation of extruded ZK60 magnesium alloy under uniaxial loading at room temperature , 2014 .

[29]  Lu Lu,et al.  Twinning-like lattice reorientation without a crystallographic twinning plane , 2014, Nature Communications.

[30]  Q. Liu,et al.  Annealing hardening in detwinning deformation of Mg–3Al–1Zn alloy , 2014 .

[31]  Subin Lee,et al.  Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM , 2014, Nature Communications.

[32]  Seong-Gu Hong,et al.  Enhancing the effect of texture control using {1 0−1 2} twins by retarding detwinning activity in rolled Mg–3Al–1Zn alloy , 2013 .

[33]  R. Zeng.  Precipitation hardening in AZ91 magnesium alloy , 2013 .

[34]  Daokui Xu,et al.  Relationship between fatigue crack initiation and activated {101¯2} twins in as-extruded pure magnesium , 2013 .

[35]  Jian Wang,et al.  A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms , 2013 .

[36]  Guohua Wu,et al.  Grain refinement and fatigue strengthening mechanisms in as-extruded Mg–6Zn–0.5Zr and Mg–10Gd–3Y–0.5Zr magnesium alloys by shot peening , 2013 .

[37]  Huamiao Wang,et al.  Modeling inelastic behavior of magnesium alloys during cyclic loading–unloading , 2013 .

[38]  M. Barnett,et al.  Solute strengthening of prismatic slip, basal slip and {1 0 1 2} twinning in Mg and Mg-Zn binary alloys , 2013 .

[39]  S. Lee,et al.  Pseudoelastic behavior of magnesium alloy during twinning-dominated cyclic deformation , 2013 .

[40]  C. P. Chang,et al.  Grain size effect on deformation twinning in Mg–Al–Zn alloy , 2013 .

[41]  D. Fullwood,et al.  Twinning in magnesium alloy AZ31B under different strain paths at moderately elevated temperatures , 2013 .

[42]  X. Fang,et al.  Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries , 2013, Science.

[43]  M. Cherkaoui,et al.  Flow asymmetry and nucleation stresses of {101¯2} twinning and non-basal slip in magnesium , 2013 .

[44]  Jiangwen Liu,et al.  On the multiple orientation relationship of the Mg/γ-Mg17Al12 precipitation system , 2012 .

[45]  M. Horstemeyer,et al.  Twinning effects in a rod-textured AM30 Magnesium alloy , 2012 .

[46]  M. Barnett,et al.  Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression , 2012 .

[47]  M. Enoki,et al.  Anelastic recovery of pure magnesium quantitatively evaluated by acoustic emission , 2011 .

[48]  M. Noda,et al.  Crystal plasticity analysis of texture development in magnesium alloy during extrusion , 2011 .

[49]  Yanyao Jiang,et al.  Direct observation of twinning–detwinning–retwinning on magnesium single crystal subjected to strain-controlled cyclic tension–compression in [0 0 0 1] direction , 2011 .

[50]  I. Beyerlein,et al.  Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: A multi-scale modeling study , 2011 .

[51]  A. Pandey,et al.  Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures , 2011 .

[52]  S. Lee,et al.  Plastic Deformation of Magnesium Alloy Subjected to Compression-First Cyclic Loading , 2011 .

[53]  J. Robson,et al.  Effect of precipitate shape on slip and twinning in magnesium alloys , 2011 .

[54]  I. Beyerlein,et al.  Texture evolution via combined slip and deformation twinning in rolled silver–copper cast eutectic nanocomposite , 2011 .

[55]  Seong-Gu Hong,et al.  Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy , 2010 .

[56]  C. Sinclair,et al.  Reducing the tension–compression yield asymmetry in a Mg–8Al–0.5Zn alloy via precipitation , 2010 .

[57]  M. Barnett,et al.  Effect of particles on the formation of deformation twins in a magnesium-based alloy , 2009 .

[58]  P. Šittner,et al.  In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behaviour of extruded AZ31 magnesium alloy , 2009 .

[59]  Gwénaëlle Proust,et al.  Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31 , 2009 .

[60]  E. Han,et al.  Solid solution strengthening behaviors in binary Mg-Y single phase alloys , 2009 .

[61]  S. Li,et al.  The role of twinning-detwinning on fatigue fracture morphology of Mg-3%Al-1%Zn alloy , 2008 .

[62]  Bjørn Clausen,et al.  Reorientation and stress relaxation due to twinning: Modeling and experimental characterization for Mg , 2008 .

[63]  Carlos N. Tomé,et al.  A dislocation-based constitutive law for pure Zr including temperature effects , 2008 .

[64]  F. Taheri,et al.  Effect of texture on acoustic emission produced by slip and twinning in AZ31B magnesium alloy , 2008 .

[65]  P. Liaw,et al.  Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A , 2008 .

[66]  M. Enoki,et al.  Deformation and Anelastic Recovery of Pure Magnesium and AZ31B Alloy Investigated by AE , 2007 .

[67]  J. C. Huang,et al.  The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy , 2007 .

[68]  R. H. Wagoner,et al.  Hardening evolution of AZ31B Mg sheet , 2007 .

[69]  C. Hutchinson,et al.  Modeling the precipitation processes and strengthening mechanisms in a Mg-Al-(Zn) AZ91 alloy , 2005 .

[70]  C. H. Cáceres,et al.  Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading–unloading , 2003 .

[71]  J. Embury,et al.  Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction , 1999 .

[72]  J. Embury,et al.  The interaction of twins and precipitates in a Mg-7.7 at.% Al alloy , 1998 .

[73]  B. Pines,et al.  Change of dislocation density in aluminium and lithium fluoride after annealing near the melting point under hydrostatic pressure , 1968 .