Microstructure–toughness–wear relationship of tetragonal zirconia ceramics

The goal of the present work is to investigate the influence of microstructural variables (grain size, overall yttria content and yttria distribution) and toughness on the tribological behavior of yttria-stabilised tetragonal zirconia (Y-TZP) ceramics. Unlubricated fretting tests were performed on Y-TZP ceramics against commercial hardmetal (WC-Co) ball under ambient conditions of temperature and humidity. The ceramics were processed from commercial yttria-coated and co-precipitated powder as well as the newly formulated powder mixtures with varying overall yttria content and yttria distribution. Microstructural investigation of the worn surfaces was performed and the wear mechanisms were studied. Based on the measured tribological data, the relationships among the friction coefficient, wear, toughness and microstructural variables were elucidated. Within the investigated fretting regime, phase transformation (tetragonal to monoclinic zirconia) induced microcracking and spalling was found to play a major role in the wear of high toughness TZP ceramics. The significant outcome of our research is that a trade-off between the fracture toughness and the wear resistance is achieved in the newly processed Y-TZPs.

[1]  H. Verweij,et al.  Grain-Size Dependence of Sliding Wear in Tetragonal Zirconia Polycrystals , 1996 .

[2]  F. Lange.  Transformation‐Toughened ZrO2: Correlations between Grain Size Control and Composition in the System ZrO2‐Y2O3 , 1986 .

[3]  J. Vižintin,et al.  Temperatures at the interface and inside an oscillatory sliding microcontact — theoretical part , 1999 .

[4]  J. Celis,et al.  Influence of humidity on the fretting wear of self-mated tetragonal zirconia ceramics , 2000 .

[5]  J. Vleugels,et al.  Transformation behavior of yttria stabilized tetragonal zirconia polycrystal–TiB_2 composites , 2001 .

[6]  S. M. Hsu,et al.  Ceramic wear maps , 1996 .

[7]  K. Han,et al.  Quantitative phase analysis in tetragonal-rich tetragonal/monoclinic two phase zirconia by Raman spectroscopy , 1997 .

[8]  Patrick M. Kelly,et al.  Transformation Toughening in Zirconia‐Containing Ceramics , 2004 .

[9]  Brian R. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I , 1981 .

[10]  R. Bradt,et al.  Effect of Grain Size on the Sliding Wear and Friction of Alumina at Elevated Temperatures , 2004 .

[11]  H. Verweij,et al.  Effects of grain size and ceria addition on ageing behaviour and tribological properties of Y-TZP ceramics , 1998 .

[12]  M. Ashby,et al.  Friction-Heating Maps and Their Applications , 1991 .

[13]  Stephen M. Hsu,et al.  Ceramic Wear Maps: Zirconia , 1993 .

[14]  H. Verweij,et al.  Influence of Porosity on Friction and Wear of Tetragonal Zirconia Polycrystal , 2005 .

[15]  J. Celis,et al.  Laboratory testing of displacement and load induced fretting , 1995 .

[16]  R. Stevens,et al.  The effect of surface transformation on the wear behaviour of zirconia TZP ceramics , 1989 .

[17]  A. Evans.  Perspective on the Development of High‐Toughness Ceramics , 1990 .

[18]  E. Kisi,et al.  Crystal Structures of Zirconia Phases and their Inter-Relation , 1998 .

[19]  Michael P. Anderson,et al.  Influence of Fracture Toughness on the Wear Resistance of Yttria‐Doped Zirconium Oxide , 1989 .

[20]  J. Celis,et al.  Fretting wear of selected ceramics and cermets , 1994 .

[21]  A. G. Evans,et al.  High toughness ceramics and ceramic composites , 1989 .