Synthesis of cellulose-derived carbon dots using acidic ionic liquid as a catalyst and its application for detection of Hg2+

Carbon dots (CDs) as versatile carbon-based nanomaterials have attracted increasing attention because of their non-toxicity, good water solubility and photostability, and easy surface functionalization. For their wide application, it is still needed to explore moderate and facile methods for synthesizing CDs from green and inexpensive precursors. In this paper, a moderate method was developed to synthesize water-soluble CDs by ionothermal treatment of cellulose with SO3H-functionalized acidic ionic liquid as a catalyst in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). The preparation process was carried out at relatively low temperature in non-pressurized vessel. The synthesized CDs exhibit near-spherical morphology with an average diameter of 8.0 nm, and the surface is carbon and oxygen rich. The CDs have powder-blue fluorescence with excitation-dependent emission behavior and excellent stability. Moreover, the as-prepared CDs were demonstrated as an effective “turn-off” fluorescent probe for the selective detection of Hg2+ with a good linear relationship over the concentration range from 6 to 80 μM. The application of acidic ionic liquid should provide a new path for the synthesis of CDs under mild condition.

[1]  S. N. Baker,et al.  Luminescent Carbon Nanodots: Emergent Nanolights , 2011 .

[2]  Xuwei Chen,et al.  The production of pH-sensitive photoluminescent carbon nanoparticles by the carbonization of polyethylenimine and their use for bioimaging , 2013 .

[3]  A. Hajipour,et al.  Acidic Bronsted Ionic Liquids , 2010 .

[4]  Martin M. F. Choi,et al.  Facile synthesis of nitrogen-doped carbon dots for Fe(3+) sensing and cellular imaging. , 2015, Analytica chimica acta.

[5]  Zhiwei Zhao,et al.  Facile ionic-liquid-assisted electrochemical synthesis of size-controlled carbon quantum dots by tuning applied voltages , 2014 .

[6]  Jun-sheng Yu,et al.  Ethanol in aqueous hydrogen peroxide solution: Hydrothermal synthesis of highly photoluminescent carbon dots as multifunctional nanosensors , 2015 .

[7]  S. Yao,et al.  Electrochemical synthesis of carbon nanodots directly from alcohols. , 2014, Chemistry.

[8]  Robin D. Rogers,et al.  Ionic Liquid Processing of Cellulose , 2012 .

[9]  James A. Dumesic,et al.  Liquid-Phase Catalytic Processing of Biomass-Derived Oxygenated Hydrocarbons to Fuels and Chemicals , 2007 .

[10]  M. Tan,et al.  Development of multicolor carbon nanoparticles for cell imaging. , 2013, Talanta.

[11]  Zhiyu Huang,et al.  Hydrothermal synthesis of ionic liquid-capped carbon quantum dots with high thermal stability and anion responsiveness , 2015, Journal of Materials Science.

[12]  H. Ohno,et al.  Task Specific Ionic Liquids for Cellulose Technology , 2009 .

[13]  K. Loh,et al.  One-pot synthesis of fluorescent carbon nanoribbons, nanoparticles, and graphene by the exfoliation of graphite in ionic liquids. , 2009, ACS nano.

[14]  Chang Yu,et al.  Chemically tailoring coal to fluorescent carbon dots with tuned size and their capacity for Cu(II) detection. , 2014, Small.

[15]  Youfu Wang,et al.  Carbon quantum dots: synthesis, properties and applications , 2014 .

[16]  Huanling Song,et al.  Hydrolysis of cellulose in SO₃H-functionalized ionic liquids. , 2011, Bioresource technology.

[17]  Gregor P. Jose,et al.  Histidine based fluorescence sensor detects Hg2+ in solution, paper strips, and in cells. , 2012, Inorganic chemistry.

[18]  Yafei Zhang,et al.  Nitrogen-doped, carbon-rich, highly photoluminescent carbon dots from ammonium citrate. , 2014, Nanoscale.

[19]  R. D. Rogers,et al.  Ionic liquids for energy, materials, and medicine. , 2014, Chemical communications.

[20]  X. Qu,et al.  Ionic liquids as precursors for highly luminescent, surface-different nitrogen-doped carbon dots used for label-free detection of Cu2+/Fe3+ and cell imaging. , 2014, Analytica chimica acta.

[21]  Latha A. Gearheart,et al.  Electrophoretic analysis and purification of fluorescent single-walled carbon nanotube fragments. , 2004, Journal of the American Chemical Society.

[22]  Hui Huang,et al.  One-step catalase controllable degradation of C3N4 for N-doped carbon dot green fabrication and their bioimaging applications. , 2014, Journal of materials chemistry. B.

[23]  M. Antonietti,et al.  Ionic liquids for the convenient synthesis of functional nanoparticles and other inorganic nanostructures. , 2004, Angewandte Chemie.

[24]  Yunsheng Xia,et al.  Use of surface-modified CdTe quantum dots as fluorescent probes in sensing mercury (II). , 2007, Talanta.

[25]  Jun-sheng Yu,et al.  Waste frying oil as a precursor for one-step synthesis of sulfur-doped carbon dots with pH-sensitive photoluminescence , 2014 .

[26]  S. Feng,et al.  Histidine-derived nontoxic nitrogen-doped carbon dots for sensing and bioimaging applications. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[27]  Jian-Rong Zhang,et al.  Hair fiber as a precursor for synthesizing of sulfur- and nitrogen-co-doped carbon dots with tunable luminescence properties , 2013 .

[28]  L. Qu,et al.  A green one-arrow-two-hawks strategy for nitrogen-doped carbon dots as fluorescent ink and oxygen reduction electrocatalysts , 2014 .

[29]  Quan Xu,et al.  Enhancing the luminescence of carbon dots by doping nitrogen element and its application in the detection of Fe(III) , 2015, Journal of Materials Science.

[30]  Xiangyou Li,et al.  Preparation of carbon quantum dots with tunable photoluminescence by rapid laser passivation in ordinary organic solvents. , 2011, Chemical communications.

[31]  Bai Yang,et al.  The photoluminescence mechanism in carbon dots (graphene quantum dots, carbon nanodots, and polymer dots): current state and future perspective , 2015, Nano Research.

[32]  Yingshuai Liu,et al.  One-step green synthesized fluorescent carbon nanodots from bamboo leaves for copper(II) ion detection , 2014 .

[33]  Jinlong Yang,et al.  Modulation and effects of surface groups on photoluminescence and photocatalytic activity of carbon dots. , 2013, Nanoscale.

[34]  X. Qu,et al.  Microwave assisted one-step green synthesis of cell-permeable multicolor photoluminescent carbon dots without surface passivation reagents , 2011 .

[35]  Chi Zhang,et al.  A hydrothermal route to water-stable luminescent carbon dots as nanosensors for pH and temperature , 2015 .

[36]  F. Gao,et al.  A green heterogeneous synthesis of N-doped carbon dots and their photoluminescence applications in solid and aqueous states. , 2014, Nanoscale.

[37]  Juan-Yu Yang,et al.  Fabrication of “clean” nano-structured metal materials on ionic liquid/water interface , 2014 .

[38]  Mingwang Shao,et al.  Upconversion and downconversion fluorescent graphene quantum dots: ultrasonic preparation and photocatalysis. , 2012, ACS nano.

[39]  Xiaoming Yang,et al.  Novel and green synthesis of high-fluorescent carbon dots originated from honey for sensing and imaging. , 2014, Biosensors & bioelectronics.

[40]  Pei-sheng Ma,et al.  SO₃H-functionalized acidic ionic liquids as catalysts for the hydrolysis of cellulose. , 2013, Carbohydrate polymers.