A Fully Integrated Energy-Aware Baseband Circuitry for Next-Generation Retinal Implants

The state-of-the-art prosthetic devices have been successfully approved as critical approach to provide at least partial reconstruction for physiological diseases by replacing a damaged tissue or organ. Invariably, they are always aspired to have lower power consumption despite the battery or the battery-less implementation. This paper presents an energy-aware baseband circuitry concerned about the next-generation multi-channel prostheses especially for the retinal implant in which an inductive-coil link is preferred to fulfill the need of power delivery for providing safer tissue-machine interfaces in the intraocular environment. The extended lifetime for those of the battery-dependent implants can be also achieved by adopting such a power-efficient scheme. The proposed system is a 16-channel-based on-electrode multiplexing design, which can deal with up to 40 frame/sec with 240 stimulus channels in mode I and 3 times the resolution at the same frame rate in mode II under a carrier frequency of 2 MHz. A prototypical chip was implemented in a 0.18mum CMOS process and the experiment has also been carried out as proof of concept.

[1]  J. Weiland,et al.  Pattern electrical stimulation of the human retina , 1999, Vision Research.

[2]  Kaushik Roy,et al.  QSERL: quasi-static energy recovery logic , 2001 .

[3]  Gislin Dagnelie,et al.  Visually guided performance of simple tasks using simulated prosthetic vision. , 2003, Artificial organs.

[4]  Said F. Al-Sarawi,et al.  Low power Schmitt trigger circuit , 2002 .

[5]  Yin Chang,et al.  An Efficient Micro-Stimulator Array Using Unitary-Size DAC With Adiabatic Baseband Scheme , 2006, 2006 13th IEEE International Conference on Electronics, Circuits and Systems.

[6]  Chua-Chin Wang,et al.  A C-less ASK demodulator for implantable neural interfacing chips , 2004, 2004 IEEE International Symposium on Circuits and Systems (IEEE Cat. No.04CH37512).