High thermal performance composite PCMs loading xGnP for application to building using radiant floor heating system

Abstract The building sector is known to make a large contribution to total energy consumption and CO 2 emissions. Phase change materials (PCMs) have been considered for thermal energy storage in buildings. The aim of this study was to improve the thermal conductivity of PCMs applicable as building materials using a radiant floor heating system. Using exfoliated graphite nanoplatelets (xGnP), composite PCMs were prepared by mixing and melting techniques for high dispersibility, thermal conductivity and latent heat storage. xGnP of 3 and 5 wt% was added to three types of liquid pure PCMs (octadecane, hexadecane and paraffin) with different melting points. The composite PCMs loaded with xGnP were characterized by using the SEM technique. The thermal properties of the composite PCM loaded with xGnP were determined by thermal conductivity analysis and DSC analysis. SEM morphology showed homogenous and ordered dispersion of xGnP in the three types of PCMs. The thermal conductivity of composite PCMs was increased with the xGnP loaded contents. The DSC results showed that the melting temperature and latent heat of the composite PCMs loaded with xGnP was maintained. The latent heat of composite PCMs slightly decreases when loading with xGnP. As a result, composite PCMs loaded with xGnP can be considered as energy saving building materials for a residential building using a radiant floor heating system.

[1]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .

[2]  Ignacio Zabalza Bribián,et al.  Life cycle assessment in buildings: State-of-the-art and simplified LCA methodology as a complement for building certification , 2009 .

[3]  Yuan Hu,et al.  Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change material , 2010 .

[4]  A. Sari,et al.  Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage , 2011 .

[5]  Eunyoung Kim,et al.  Preparation and properties of microencapsulated octadecane with waterborne polyurethane , 2005 .

[6]  A. Sari,et al.  Fatty acid/poly(methyl methacrylate) (PMMA) blends as form-stable phase change materials for latent heat thermal energy storage , 2008 .

[7]  Sumin Kim,et al.  Thermal stability and viscoelastic properties of MF/PVAc hybrid resins on the adhesion for engineered flooring in under heating system; ONDOL , 2006 .

[8]  Geoff Levermore,et al.  A review of the IPCC Assessment Report Four, Part 1: the IPCC process and greenhouse gas emission trends from buildings worldwide , 2008 .

[9]  Shan Hu,et al.  The experimental exploration of carbon nanofiber and carbon nanotube additives on thermal behavior of phase change materials , 2011 .

[10]  Jungki Seo,et al.  Building materials thermal conductivity measurement and correlation with heat flow meter, laser flash analysis and TCi , 2012, Journal of Thermal Analysis and Calorimetry.

[11]  Yuan Hu,et al.  Synergistic effect of iron and intumescent flame retardant on shape-stabilized phase change material , 2009 .

[12]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[13]  Zhengguo Zhang,et al.  Study on paraffin/expanded graphite composite phase change thermal energy storage material , 2006 .

[14]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[15]  Bogdan Diaconu,et al.  Transient thermal response of a PCS heat storage system , 2009 .

[16]  Alison Kwok,et al.  Addressing climate change in comfort standards , 2010 .

[17]  L. Drzal,et al.  High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets , 2009 .

[18]  Mohammed M. Farid,et al.  Fire Retardants for Phase Change Materials , 2011, Thermal Energy Storage with Phase Change Materials.

[19]  Gook-Sup Song,et al.  Buttock responses to contact with finishing materials over the ONDOL floor heating system in Korea , 2005 .

[20]  Jianlei Niu,et al.  Raising evaporative cooling potentials using combined cooled ceiling and mPCM slurry storage , 2008 .

[21]  Xu Xu,et al.  Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .

[22]  André Bontemps,et al.  Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material , 2006 .

[23]  Luisa F. Cabeza,et al.  Heat transfer enhancement in water when used as PCM in thermal energy storage , 2002 .

[24]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[25]  J. Fricke,et al.  PCM-facade-panel for daylighting and room heating , 2005 .

[26]  Yibing Cai,et al.  Thermal stability, latent heat and flame retardant properties of the thermal energy storage phase change materials based on paraffin/high density polyethylene composites , 2009 .

[27]  A. Sari,et al.  Preparation, thermal properties and thermal reliability of microencapsulated n-eicosane as novel phase change material for thermal energy storage , 2011 .

[28]  Yuan Hu,et al.  Preparation, thermal and flammability properties of a novel form-stable phase change materials based on high density polyethylene/poly(ethylene-co-vinyl acetate)/organophilic montmorillonite nanocomposites/paraffin compounds , 2008 .