Nondestructive Analysis of Debonds in a Composite Structure under Variable Temperature Conditions

This paper presents a nondestructive analysis of debonds in an adhesively-bonded carbon-fibre reinforced composite structure under variable temperature conditions. Towards this, ultrasonic guided wave propagation based experimental analysis and numerical simulations are carried out for a sample composite structure to investigate the wave propagation characteristics and detect debonds under variable operating temperature conditions. The analysis revealed that the presence of debonds in the structure significantly reduces the wave mode amplitudes, and this effect further increases with the increase in ambient temperature and debond size. Based on the debond induced differential amplitude phenomenon, an online monitoring strategy is proposed that directly uses the guided wave signals from the distributed piezoelectric sensor network to localize the hidden debonds in the structure. Debond index maps generated from the proposed monitoring strategy show the debond identification potential in the adhesively-bonded composite structure. The accuracy of the monitoring strategy is successfully verified with non-contact active infrared-thermography analysis results. The effectiveness of the proposed monitoring strategy is further investigated for the variable debond size and ambient temperature conditions. The study establishes the potential for using the proposed damage index constructed from the differential guided wave signal features as a basis for localization and characterization of debond damages in operational composite structures.

[1]  C. Bert,et al.  The behavior of structures composed of composite materials , 1986 .

[2]  Stephen D. Holland.  Thermographic signal reconstruction for vibrothermography , 2011 .

[3]  Guoliang Huang,et al.  Guided wave propagation in honeycomb sandwich structures using a piezoelectric actuator/sensor system , 2009 .

[4]  Vladimir P. Vavilov,et al.  A novel approach for one-sided thermal nondestructive testing of composites by using infrared thermography , 2015 .

[5]  Peter Cawley,et al.  Guided wave health monitoring of complex structures by sparse array systems: Influence of temperature changes on performance , 2010 .

[6]  N. D. Boffa,et al.  Guided waves in a stiffened composite laminate with a delamination , 2016 .

[7]  Marc Georges,et al.  Review of thermal imaging systems in composite defect detection , 2013 .

[8]  Daniel L. Balageas,et al.  Comparative Assessment of Thermal NDT Data Processing Techniques for Carbon Fiber Reinforced Polymers , 2017 .

[9]  Bruce A. Rubadeux,et al.  Reconstruction and enhancement of active thermographic image sequences , 2003 .

[10]  Victor Giurgiutiu,et al.  Single Mode Tuning Effects on Lamb Wave Time Reversal with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2007 .

[11]  Yunze He,et al.  Volume or inside heating thermography using electromagnetic excitation for advanced composite materials , 2017 .

[12]  Mohammad Jawaid,et al.  Impact behaviour of hybrid composites for structural applications: a review , 2018 .

[13]  Tobias Wille,et al.  An analytical scaling approach for low-velocity impact on composite structures , 2018 .

[14]  Baldev Raj,et al.  Quantification of defects in composites and rubber materials using active thermography , 2012 .

[15]  M. Lizaranzu,et al.  Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades , 2011 .

[16]  Sauvik Banerjee,et al.  Guided wave propagation in a honeycomb composite sandwich structure in presence of a high density core. , 2016, Ultrasonics.

[17]  Y. Koutsawa,et al.  A numerical homogenization of E-glass/acrylic woven composite laminates: Application to low velocity impact , 2018, Composite Structures.

[18]  M. Aliabadi,et al.  Guided wave temperature correction methods in structural health monitoring , 2017 .

[19]  D. Zenkert,et al.  Handbook of Sandwich Construction , 1997 .

[20]  Stephen D. Holland,et al.  The sources of heat generation in vibrothermography , 2011 .

[21]  V. Giurgiutiu.  Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2005 .

[22]  Yongan Huang,et al.  Impact Monitoring for Aircraft Smart Composite Skins Based on a Lightweight Sensor Network and Characteristic Digital Sequences , 2018, Sensors.

[23]  Joseph L. Rose,et al.  Rapid Inspection of Composite Skin-Honeycomb Core Structures with Ultrasonic Guided Waves , 2003 .

[24]  C. C. Chamis,et al.  Simplified composite micromechanics equations for hygral, thermal and mechanical properties , 1983 .

[25]  Tanish Dey,et al.  Computation of worst geometric imperfection profiles of composite cylindrical shell panels by minimizing the non-linear buckling load , 2019, Applied Mathematical Modelling.

[26]  Emmanuel Moulin,et al.  Radome health monitoring with Lamb waves: experimental approach , 2000 .

[27]  P. Venegas,et al.  Feature extraction and analysis for automatic characterization of impact damage in carbon fiber composites using active thermography , 2013 .

[28]  Wieslaw Ostachowicz,et al.  Online detection of barely visible low-speed impact damage in 3D-core sandwich composite structure , 2018 .

[29]  Sauvik Banerjee,et al.  Theoretical modeling of guided wave propagation in a sandwich plate subjected to transient surface excitations , 2012 .

[30]  Harald E.N. Bersee,et al.  Thermal NDI of resistance welded composite structures , 2009 .