Self-Assembled Peptide Nanotubes as an Etching Material for the Rapid Fabrication of Silicon Wires

This study has evaluated self-assembled peptide nanotubes (PNTS) and nanowires (PNWS) as etching mask materials for the rapid and low-cost fabrication of silicon wires using reactive ion etching (RIE). The self-assembled peptide structures were fabricated under mild conditions and positioned on clean silicon wafers, after which these biological nanostructures were exposed to an RIE etching process. Following this treatment, the structure of the remaining nanotubes and nanowires was analyzed by scanning electron microscopy (SEM). Important differences in the behavior of the nanotubes and the nanowires were observed after the RIE process. The nanotubes remained intact while the nanowires were destroyed by the RIE process. The instability of the peptide nanowires during this process was further confirmed with focused ion beam milling experiments. The PNTS could stand energetic argon ions for around 32 s while the PNWS resisted only 4 s before becoming milled. Based on these results, self-assembled PNTS were further used as an etching mask to fabricate silicon wires in a rapid and low-cost manner. The obtained silicon wires were subjected to structural and electrical characterization by SEM and I–V measurements. Additionally, the fabricated silicon structures were functionalized with fluorescent molecules via a biotin–streptavidin interaction in order to probe their potential in the development of biosensing devices.

[1]  M. Hedström,et al.  Stability of diphenylalanine peptide nanotubes in solution. , 2011, Nanoscale.

[2]  Maria Dimaki,et al.  Manipulation of self‐assembly amyloid peptide nanotubes by dielectrophoresis , 2008, Electrophoresis.

[3]  M.E. Zaghloul,et al.  Localized growth and functionalization of silicon nanowires for MEMS sensor applications , 2005, Proceedings of the 2005 European Conference on Circuit Theory and Design, 2005..

[4]  Chan Beum Park,et al.  High stability of self‐assembled peptide nanowires against thermal, chemical, and proteolytic attacks , 2010, Biotechnology and bioengineering.

[5]  Nobuo Fujiwara,et al.  Developments of Plasma Etching Technology for Fabricating Semiconductor Devices , 2008 .

[6]  Ampere A. Tseng,et al.  Recent developments in micromilling using focused ion beam technology , 2004 .

[7]  W. Svendsen,et al.  Qualitative mapping of structurally different dipeptide nanotubes. , 2008, Nano letters.

[8]  Shams Mohajerzadeh,et al.  Formation of silicon nanograss and microstructures on silicon using deep reactive ion etching , 2010 .

[9]  Oliver Hayden,et al.  Semiconductor nanowire devices , 2008 .

[10]  Akademii︠a︡ medit︠s︡inskikh nauk Sssr.  Journal of physics , 1939 .

[11]  Gengfeng Zheng,et al.  Fabrication of silicon nanowire devices for ultrasensitive, label-free, real-time detection of biological and chemical species , 2006, Nature Protocols.

[12]  W. Milne,et al.  Nanowire lithography on silicon. , 2008, Nano letters.

[13]  W. Svendsen,et al.  Micro-factory for self-assembled peptide nanostructures , 2011 .

[14]  G. Korotcenkov,et al.  Silicon Porosification: State of the Art , 2010 .

[15]  E. Gazit,et al.  Biological and chemical decoration of peptide nanostructures via biotin-avidin interactions. , 2007, Journal of nanoscience and nanotechnology.

[16]  Post-Processing Techniques for the Integration of Silicon Nanowires and MEMS , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[17]  Xuehai Yan,et al.  Self-assembly and application of diphenylalanine-based nanostructures. , 2010, Chemical Society reviews.

[18]  S. Weiss,et al.  Porous Silicon One-Dimensional Photonic Crystals for Optical Signal Modulation , 2006, IEEE Journal of Selected Topics in Quantum Electronics.

[19]  Peidong Yang,et al.  Semiconductor nanowire: what's next? , 2010, Nano letters.

[20]  H. Matsui,et al.  Applications of peptide and protein-based materials in bionanotechnology. , 2010, Chemical Society reviews.

[21]  B. E. Alaca,et al.  Monolithic Integration of Silicon Nanowires With a Microgripper , 2009, Journal of Microelectromechanical Systems.

[22]  Yong Qing Fu,et al.  Deep reactive ion etching as a tool for nanostructure fabrication , 2009 .

[23]  A. Aggeli,et al.  Self-assembling peptide nanotubes , 2008 .

[24]  J. A. Diaz,et al.  Thermo-mechanical stability and strength of peptide nanostructures from molecular dynamics: self-assembled cyclic peptide nanotubes , 2010, Nanotechnology.

[25]  Beth L. Pruitt,et al.  Review: Semiconductor Piezoresistance for Microsystems , 2009, Proceedings of the IEEE.

[26]  M. Esashi,et al.  From MEMS to nanomachine , 2005 .

[27]  Ashok Kumar,et al.  One-dimensional nanostructures: fabrication, characterisation and applications , 2008 .

[28]  Lucille A. Giannuzzi,et al.  A review of focused ion beam milling techniques for TEM specimen preparation , 1999 .

[29]  Meital Reches,et al.  Designed aromatic homo-dipeptides: formation of ordered nanostructures and potential nanotechnological applications , 2006, Physical Biology.

[30]  Chan Beum Park,et al.  High‐Temperature Self‐Assembly of Peptides into Vertically Well‐Aligned Nanowires by Aniline Vapor , 2008 .

[31]  P. Bandaru,et al.  An outline of the synthesis and properties of silicon nanowires , 2010 .

[32]  Effect of temperature and silicon resistivity on the elaboration of silicon nanowires by electroless etching , 2010 .

[33]  Masatsugu Shimomura,et al.  Biomimetic bi-functional silicon nanospike-array structures prepared by using self-organized honeycomb templates and reactive ion etching , 2010 .

[34]  Sebastian Strobel,et al.  Sub-10 nm structures on silicon by thermal dewetting of platinum , 2010, Nanotechnology.