Influence of process parameters on machining studies on stir casted MMCs with AA6351 and TiO2 by grey and desirability approaches

[1]  L. Natrayan,et al.  Investigation of Physicochemical Properties and Characterization of Leaf Stalk Fibres Extracted from the Caribbean Royal Palm Tree , 2022, International Journal of Chemical Engineering.

[2]  L. Natrayan,et al.  Investigation of Mechanical and Thermal Properties on Novel Wheat Straw and PAN Fibre Hybrid Green Composites , 2022, International Journal of Chemical Engineering.

[3]  S. Angalaeswari,et al.  An Effective Charger for Plug-In Hybrid Electric Vehicles (PHEV) with an Enhanced PFC Rectifier and ZVS-ZCS DC/DC High-Frequency Converter , 2022, Journal of Advanced Transportation.

[4]  L. Natrayan,et al.  Experimental Investigation to Utilize Adsorption and Absorption Technique to Reduce CO2 Emissions in Diesel Engine Exhaust Using Amine Solutions , 2022, Adsorption Science & Technology.

[5]  L. Natrayan,et al.  Experimental Investigation on Tribological Behaviour of Various Processes of Anodized Coated Piston for Engine Application , 2022, Journal of Nanomaterials.

[6]  K. Nagarajan,et al.  Combined Economic Emission Dispatch of Microgrid with the Incorporation of Renewable Energy Sources Using Improved Mayfly Optimization Algorithm , 2022, Computational intelligence and neuroscience.

[7]  N. S. Sivakumar,et al.  Annealed peanut shell biochar as potential reinforcement for aloe vera fiber-epoxy biocomposite: mechanical, thermal conductivity, and dielectric properties , 2022, Biomass Conversion and Biorefinery.

[8]  Y. Devarajan,et al.  Detailed analysis on engine operating in dual fuel mode with different energy fractions of sustainable HHO gas , 2022, Environmental Progress & Sustainable Energy.

[9]  T. V. Arjunan,et al.  A case study on thermo-hydraulic performance of jet plate solar air heater using response surface methodology , 2022, Case Studies in Thermal Engineering.

[10]  T. Sathish,et al.  Investigations on influences of MWCNT composite membranes in oil refineries waste water treatment with Taguchi route. , 2022, Chemosphere.

[11]  L. Natrayan,et al.  Experimental study on removal of phenol formaldehyde resin coating from the abrasive disc and preparation of abrasive disc for polishing application , 2022, Advances in Materials Science and Engineering.

[12]  L. Natrayan,et al.  Experimental Investigation on Tribological Behaviour of AA6066: HSS-Cu Hybrid Composite in Dry Sliding Condition , 2022, Advances in Materials Science and Engineering.

[13]  L. Natrayan,et al.  Deep Learning with Backtracking Search Optimization Based Skin Lesion Diagnosis Model , 2022, Computers, Materials & Continua.

[14]  L. Natrayan,et al.  Structural Behavior of Nanocoated Oil Palm Shell as Coarse Aggregate in Lightweight Concrete , 2021, Journal of Nanomaterials.

[15]  B. Karthikeyan,et al.  Structural analysis of hybridized glass fiber hemp fiber reinforced composite wheel rim , 2021 .

[16]  L. Natrayan,et al.  Influence of SiC Particles on Mechanical and Microstructural Properties of Modified Interlock Friction Stir Weld Lap Joint for Automotive Grade Aluminium Alloy , 2021, Silicon.

[17]  S. Siengchin,et al.  Perspectives of anaerobic decomposition of biomass for sustainable biogas production: A Review , 2021, E3S Web of Conferences.

[18]  L. Natrayan,et al.  Synthesis and Characterization of Polypropylene/Ramie Fiber with Hemp Fiber and Coir Fiber Natural Biopolymer Composite for Biomedical Application , 2021, International Journal of Polymer Science.

[19]  L. Natrayan,et al.  Improvement on Mechanical Properties of Submerged Friction Stir Joining of Dissimilar Tailor Welded Aluminum Blanks , 2021 .

[20]  L. Natrayan,et al.  Analysis of RCC T-beam and prestressed concrete box girder bridges super structure under different span conditions , 2020 .

[21]  L. Natrayan,et al.  Experimental investigation on wear behaviour of bio-waste reinforced fusion fiber composite laminate under various conditions , 2020 .

[22]  M.A. Islam,et al.  Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles , 2020 .

[23]  Anish Khan,et al.  Investigation on the Physicochemical and Mechanical Properties of Novel Alkali-treated Phaseolus vulgaris Fibers , 2020, Journal of Natural Fibers.

[24]  A. M. Moshi,et al.  Characterization of surface-modified natural cellulosic fiber extracted from the root of Ficus religiosa tree. , 2020, International journal of biological macromolecules.

[25]  G. M. Naik,et al.  Microstructure and mechanical properties of TiO2 reinforced ZA22 metal matrix composite , 2020 .

[26]  M. Ravichandran,et al.  Parametric optimization for friction stir welding with AA2024 and AA6061 aluminium alloys by ANOVA and GRG , 2020 .

[27]  Y. Mazaheri,et al.  Development of Cu-TiO2 surface nanocomposite by friction stir processing: Effect of pass number on microstructure, mechanical properties, tribological and corrosion behavior , 2019, Journal of Alloys and Compounds.

[28]  Yucheng Liu,et al.  Characterization of a new cellulosic natural fiber extracted from the root of Ficus religiosa tree. , 2019, International journal of biological macromolecules.

[29]  G. Nageswaran,et al.  Synthesis, structural characterization, mechanical and wear behaviour of Cu-TiO2-Gr hybrid composite through stir casting technique , 2018, Journal of Alloys and Compounds.

[30]  K. Annamalai,et al.  Experimental investigations on mechanical and microstructural properties of Al2O3/SiC reinforced hybrid metal matrix composite , 2018, IOP Conference Series: Materials Science and Engineering.

[31]  A. Chauhan,et al.  Fabrication characteristics and tensile strength of novel Al2024/SiC/red mud composites processed via stir casting route , 2017 .

[32]  B. P. Kumar,et al.  Microstructure and mechanical properties of aluminium metal matrix composites with addition of bamboo leaf ash by stir casting method , 2017 .

[33]  S.,et al.  Experimental Investigation and Optimization of Material Removal Rate and Surface Roughness in Centerless Grinding of Magnesium Alloy Using Grey Relational Analysis , 2017 .

[34]  A. Z. Syahrial,et al.  Mechanical Properties of Nano SiC-Reinforced Aluminum A356 with Sr Modifier Fabricated by Stir Casting Method , 2017 .

[35]  L. Natrayan,et al.  An Experimental Investigation on Mechanical Behaviour of SiCp Reinforced Al 6061 MMC using Squeeze Casting Process , 2017 .

[36]  G. Elango,et al.  Tribological Behavior of Hybrid (LM25Al + SiC+ TiO2) Metal Matrix Composites☆ , 2013 .

[37]  G. Chandramohan,et al.  Dry Sliding Wear Behaviour of Carbon Fabric-Reinforced Epoxy Composite with and without Silicon Carbide , 2011 .