A process for combination of recycling lithium and regenerating graphite from spent lithium-ion battery.

Recycling lithium and graphite from spent lithium-ion battery plays a significant role in mitigation of lithium resources shortage, comprehensive utilization of spent anode graphite and environmental protection. In this study, spent graphite was firstly collected by a two-stage calcination. Secondly, under the optimal conditions of 1.5 M HCI, 60 min and solid-liquid ratio (S/L) of 100 g·L-1, the collected graphite suffers simple acid leaching to make almost 100% lithium, copper and aluminum in it into leach liquor. Thirdly, 99.9% aluminum and 99.9% copper were removed from leach liquor by adjusting pH first to 7 and then to 9, and thenthe lithium was recovered by adding sodium carbonate in leach liquor to form lithium carbonate with high purity (>99%). The regenerated graphite is found to have high initial specific capacity at the rate of 37.2 mA·g-1 (591 mAh·g-1), 74.4 mA·g-1 (510 mAh·g-1) and 186 mA·g-1 (335 mAh·g-1), and with the high retention ratio of 97.9% after 100 cycles, it also displays excellent cycle performance at high rate of 372 mA·g-1. By this process, copper and lithium can be recovered and graphite can be regenerated, serving as a sustainable approach for the comprehensive utilization of anode material from spent lithium-ion battery.

[1]  Hong-rui Ma,et al.  Recovery of valuable metals from mixed types of spent lithium ion batteries. Part II: Selective extraction of lithium. , 2018, Waste management.

[2]  Wei Sun,et al.  Short process for regenerating Mn-rich cathode material with high voltage from mixed-type spent cathode materials via a facile approach , 2018, Journal of Cleaner Production.

[3]  S. Badawy.  Synthesis of high‐quality graphene oxide from spent mobile phone batteries , 2016 .

[4]  Abdul Ghaffar,et al.  Resource recovery of critically-rare metals by hydrometallurgical recycling of spent lithium ion batteries , 2019, Separation and Purification Technology.

[5]  P. R. Davies,et al.  XPS and STM studies of the oxidation of hydrogen chloride at Cu(100) surfaces , 2016 .

[6]  Hongbin Cao,et al.  Comprehensive evaluation on effective leaching of critical metals from spent lithium-ion batteries. , 2018, Waste management.

[7]  Guoyong Huang,et al.  Synthesis and performance of spherical LiNixCoyMn1-x-yO2 regenerated from nickel and cobalt scraps , 2016 .

[8]  J. Mondori,et al.  Interactions between disordered carbon and lithium in lithium ion rechargeable batteries , 1995 .

[9]  Rajiv Ranjan Srivastava,et al.  Assessment of legislation and practices for the sustainable management of waste electrical and electronic equipment in India , 2017 .

[10]  T. Yamabe,et al.  Structure and properties of deeply Li-doped polyacenic semiconductor materials beyond C6Li stage , 1994 .

[11]  Hongbin Cao,et al.  Lithium Carbonate Recovery from Cathode Scrap of Spent Lithium-Ion Battery: A Closed-Loop Process. , 2017, Environmental science & technology.

[12]  Yang Yue,et al.  Recovering Valuable Metals from Spent Lithium Ion Battery via a Combination of Reduction Thermal Treatment and Facile Acid Leaching , 2018, ACS Sustainable Chemistry & Engineering.

[13]  Petr Novák,et al.  Insertion Electrode Materials for Rechargeable Lithium Batteries , 1998 .

[14]  Xiaobo Ji,et al.  Carbon Anode Materials for Advanced Sodium‐Ion Batteries , 2017 .

[15]  H. M. Alhusaiki-Alghamdi.  Thermal and electrical properties of graphene incorporated into polyvinylidene fluoride/polymethyl methacrylate nanocomposites , 2017 .

[16]  C. Dong,et al.  Tuning the Oxidation Degree of Graphite toward Highly Thermally Conductive Graphite/Epoxy Composites , 2018, Chemistry of Materials.

[17]  G. Botte,et al.  Recycling of graphite anodes for the next generation of lithium ion batteries , 2016, Journal of Applied Electrochemistry.

[18]  Zhenming Xu,et al.  Generation and detection of metal ions and volatile organic compounds (VOCs) emissions from the pretreatment processes for recycling spent lithium-ion batteries. , 2016, Waste management.

[19]  J. Janek,et al.  Volume Changes of Graphite Anodes Revisited: A Combined Operando X-ray Diffraction and In Situ Pressure Analysis Study , 2018 .

[20]  E. Tchernychova,et al.  The synthesis of Li(CoMnNi)O2 cathode material from spent-Li ion batteries and the proof of its functionality in aqueous lithium and sodium electrolytic solutions , 2017 .

[21]  J. Dahn,et al.  Dramatic Effect of Oxidation on Lithium Insertion in Carbons Made from Epoxy Resins , 1995 .

[22]  Alok M. Tripathi,et al.  In situ analytical techniques for battery interface analysis. , 2018, Chemical Society reviews.

[23]  Guoyong Huang,et al.  Thermal treatment process for the recovery of valuable metals from spent lithium-ion batteries , 2016 .

[24]  Pankaj K Choubey,et al.  Advance review on the exploitation of the prominent energy-storage element Lithium. Part II: From sea water and spent lithium ion batteries (LIBs) , 2017 .

[25]  M. Winter,et al.  Graphite Recycling from Spent Lithium-Ion Batteries. , 2016, ChemSusChem.

[26]  Yinghe He,et al.  Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes. , 2017, Waste management.

[27]  Diran Apelian,et al.  A novel method to recycle mixed cathode materials for lithium ion batteries , 2013 .

[28]  Hongbin Cao,et al.  A Critical Review and Analysis on the Recycling of Spent Lithium-Ion Batteries , 2018 .

[29]  Hongbin Cao,et al.  A sustainable process for metal recycling from spent lithium-ion batteries using ammonium chloride. , 2018, Waste management.

[30]  Kai He,et al.  Expanded graphite as superior anode for sodium-ion batteries , 2014, Nature Communications.

[31]  Zhenming Xu,et al.  Novel Approach for in Situ Recovery of Lithium Carbonate from Spent Lithium Ion Batteries Using Vacuum Metallurgy. , 2017, Environmental science & technology.

[32]  S. El‐Safty,et al.  Extraction and recovery of Co2+ ions from spent lithium-ion batteries using hierarchical mesosponge γ-Al2O3 monolith extractors , 2018 .

[33]  Aijun Lin,et al.  Performance and mechanism of Cr(VI) removal by zero-valent iron loaded onto expanded graphite. , 2017, Journal of environmental sciences.

[34]  Hongbin Cao,et al.  Efficient reuse of anode scrap from lithium-ion batteries as cathode for pollutant degradation in electro-Fenton process: Role of different recovery processes , 2017 .

[35]  Li Li,et al.  Sustainable Recovery of Cathode Materials from Spent Lithium-Ion Batteries Using Lactic Acid Leaching System , 2017 .

[36]  Tae-Hee Kim,et al.  Enlarging the d-spacing of graphite and polarizing its surface charge for driving lithium ions fast , 2014 .

[37]  J. Gregory,et al.  Coagulation by hydrolysing metal salts , 2003 .

[38]  E. E. Lewis,et al.  Pyrolysis of Polytetrafluoroethylene , 1947 .

[39]  Feng Wu,et al.  Preparation of MnO2-Modified Graphite Sorbents from Spent Li-Ion Batteries for the Treatment of Water Contaminated by Lead, Cadmium, and Silver. , 2017, ACS applied materials & interfaces.