A Generalized SOC-OCV Model for Lithium-Ion Batteries and the SOC Estimation for LNMCO Battery

A state-of-charge (SOC) versus open-circuit-voltage (OCV) model developed for batteries should preferably be simple, especially for real-time SOC estimation. It should also be capable of representing different types of lithium-ion batteries (LIBs), regardless of temperature change and battery degradation. It must therefore be generic, robust and adaptive, in addition to being accurate. These challenges have now been addressed by proposing a generalized SOC-OCV model for representing a few most widely used LIBs. The model is developed from analyzing electrochemical processes of the LIBs, before arriving at the sum of a logarithmic, a linear and an exponential function with six parameters. Values for these parameters are determined by a nonlinear estimation algorithm, which progressively shows that only four parameters need to be updated in real time. The remaining two parameters can be kept constant, regardless of temperature change and aging. Fitting errors demonstrated with different types of LIBs have been found to be within 0.5%. The proposed model is thus accurate, and can be flexibly applied to different LIBs, as verified by hardware-in-the-loop simulation designed for real-time SOC estimation.

[1]  Donald E Neumann,et al.  A Multi-Dimensional Battery Discharge Model with Thermal Feedback Applied to a Lithium-ion Battery Pack , 2011 .

[2]  Na Li,et al.  Robust Online State of Charge Estimation of Lithium-Ion Battery Pack Based on Error Sensitivity Analysis , 2015 .

[3]  Le Yi Wang,et al.  Robust and Adaptive Estimation of State of Charge for Lithium-Ion Batteries , 2015, IEEE Transactions on Industrial Electronics.

[4]  Jun Zhang,et al.  Near-Real-Time Parameter Estimation of an Electrical Battery Model With Multiple Time Constants and SOC-Dependent Capacitance , 2014, IEEE Transactions on Power Electronics.

[5]  Yee-Pien Yang,et al.  Improved estimation of residual capacity of batteries for electric vehicles , 2008 .

[6]  Huei Peng,et al.  A unified open-circuit-voltage model of lithium-ion batteries for state-of-charge estimation and state-of-health monitoring , 2014 .

[7]  Guy Friedrich,et al.  Modeling of the diffusion phenomenon in a lithium-ion cell using frequency or time domain identification , 2013, Microelectron. Reliab..

[8]  Dirk Uwe Sauer,et al.  Adaptive estimation of the electromotive force of the lithium-ion battery after current interruption for an accurate state-of-charge and capacity determination , 2013 .

[9]  Soon Ho Chang,et al.  Investigation on the microscopic features of layered oxide Li[Ni1 / 3Co1 / 3Mn1 / 3]O2 and their influences on the cathode properties , 2006 .

[10]  Hongwen He,et al.  A systematic state-of-charge estimation framework for multi-cell battery pack in electric vehicles using bias correction technique , 2016 .

[11]  Vojtech Svoboda,et al.  Capacity loss in rechargeable lithium cells during cycle life testing: The importance of determining state-of-charge , 2007 .

[12]  Xiaosong Hu,et al.  Robustness analysis of State-of-Charge estimation methods for two types of Li-ion batteries , 2012 .

[13]  M. Dubarry,et al.  Overcharge Study in Li4Ti5O12 Based Lithium-Ion Pouch Cell I. Quantitative Diagnosis of Degradation Modes , 2015 .

[14]  Hongwen He,et al.  Model-based state of charge and peak power capability joint estimation of lithium-ion battery in plug-in hybrid electric vehicles , 2013 .

[15]  Federico Baronti,et al.  Online Adaptive Parameter Identification and State-of-Charge Coestimation for Lithium-Polymer Battery Cells , 2014, IEEE Transactions on Industrial Electronics.

[16]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2. Modeling and identification , 2004 .

[17]  Ehsan Samadani,et al.  Empirical Modeling of Lithium-ion Batteries Based on Electrochemical Impedance Spectroscopy Tests , 2015 .

[18]  Sandra Castano,et al.  Dynamical modeling procedure of a Li-ion battery pack suitable for real-time applications , 2015 .

[19]  Matthieu Dubarry,et al.  Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part I: Initial characterizations , 2011 .

[20]  Xiaosong Hu,et al.  A comparative study of equivalent circuit models for Li-ion batteries , 2012 .

[21]  K. S. Nanjundaswamy,et al.  Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .

[22]  Joongpyo Shim,et al.  Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode Powder Prepared by Different Method in Lithium Rechargeable Batteries , 2008, International Journal of Electrochemical Science.

[23]  Andrew McGordon,et al.  A study of the open circuit voltage characterization technique and hysteresis assessment of lithium-ion cells , 2015 .

[24]  Matthieu Dubarry,et al.  Identify capacity fading mechanism in a commercial LiFePO4 cell , 2009 .

[25]  Yarong Wang,et al.  Synthesis and electrochemical performance of nano-sized Li4Ti5O12 with double surface modification of Ti(III) and carbon , 2009 .

[26]  Binggang Cao,et al.  The State of Charge Estimation of Lithium-Ion Batteries Based on a Proportional-Integral Observer , 2014, IEEE Transactions on Vehicular Technology.

[27]  Henk Jan Bergveld,et al.  Battery Management Systems: Accurate State-of-Charge Indication for Battery-Powered Applications , 2008 .

[28]  Tsutomu Ohzuku,et al.  Solid-State Chemistry and Electrochemistry of LiCo1 ∕ 3Ni1 ∕ 3Mn1 ∕ 3O2 for Advanced Lithium-Ion Batteries III. Rechargeable Capacity and Cycleability , 2007 .

[29]  Tsutomu Ohzuku,et al.  Formation of Lithium‐Graphite Intercalation Compounds in Nonaqueous Electrolytes and Their Application as a Negative Electrode for a Lithium Ion (Shuttlecock) Cell. , 1993 .

[30]  Hongwen He,et al.  Adaptive state of charge estimator for lithium-ion cells series battery pack in electric vehicles , 2013 .

[31]  薮内 直明,et al.  Solid state chemistry and electrochemistry of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries , 2006 .

[32]  Le Yi Wang,et al.  Integrated System Identification and State-of-Charge Estimation of Battery Systems , 2013, IEEE Transactions on Energy Conversion.

[33]  Matthieu Dubarry,et al.  Synthesize battery degradation modes via a diagnostic and prognostic model , 2012 .

[34]  J. Goodenough.  Challenges for Rechargeable Li Batteries , 2010 .

[35]  Zachary Moorhead-Rosenberg,et al.  In situ Mitigation of First‐Cycle Anode Irreversibility in a New Spinel/FeSb Lithium‐Ion Cell Enabled via a Microwave‐Assisted Chemical Lithiation Process. , 2014 .

[36]  Yang-Kook Sun,et al.  Structural, Electrochemical, and Thermal Aspects of Li [ ( Ni0.5Mn0.5 ) 1 − x Co x ] O2 ( 0 ≤ x ≤ 0.2 ) for High-Voltage Application of Lithium-Ion Secondary Batteries , 2008 .

[37]  Ramesh K. Guduru,et al.  Binder free porous ultrafine/nano structured LiCoO2 cathode from plasma deposited cobalt , 2011 .