Magnetization of Ferrofluid and its Influence on Improving Oil Recovery

Large amount of crude oil remains in the reservoir due to the poor sweep and displacement efficiency after displacing fluid injection. To remediate this effect, a thicker displacing fluid is used to reduce viscous fingering for a more stable flood front. A ferrofluid is a suitable candidate due to the tunable viscosity profile when subjected to a magnetic field [1]. In this work, the ability of cobalt substituted magnetite ferrofluid to improve incremental recovery after waterflooding has been investigated via sand pack flooding. Prior to sand pack flooding, structural and magnetic properties of cobalt substituted magnetite nanoparticles were characterized via XRD, FESEM and VSM. Viscosity tests with field strength variation from 0 to 66.88 mT have shown a significant dependency of the ferrofluid’s viscosity on the applied field strength. 6-fold increment of viscosity was recorded when magnetic field strength changes from 19.5 to 66.88 mT. During sand pack flooding, 7.20% of incremental oil was obtained with the ferrofluid injection, even without the presence of a magnetic field. When subjected to a magnetic field, 12.93% and 15.83% of the incremental oil was obtained at 19.5 and 66.88 mT, respectively. It is proven that increase of ferrofluid viscosity with magnetic field strength results in higher incremental recovery. Improved sweep and displacement efficiency has been achieved by injecting the ferrofluid into the oil reservoir.

[1]  R. Kharrat,et al.  Improving the microscopic sweep efficiency of water flooding using silica nanoparticles , 2018, Journal of Petroleum Exploration and Production Technology.

[2]  Z. Vryzas,et al.  Smart Magnetic Drilling Fluid With In-Situ Rheological Controllability Using Fe 3 O 4 Nanoparticles , 2017 .

[3]  M. Adil,et al.  Influence of cobalt substitution on the structural and magnetic properties of cobalt substituted magnetite , 2016 .

[4]  H. Lau,et al.  Nanotechnology for oilfield applications: Challenges and impact , 2016 .

[5]  P. Das,et al.  Synthesis, characterization and studies on magneto-viscous properties of magnetite dispersed water based nanofluids , 2016 .

[6]  W. Lijun,et al.  Investigation on viscosity of Fe3O4 nanofluid under magnetic field , 2016 .

[7]  G. Cheraghian,et al.  A review on applications of nanotechnology in the enhanced oil recovery part B: effects of nanoparticles on flooding , 2016, International Nano Letters.

[8]  S. Odenbach,et al.  Anisotropy of the magnetoviscous effect in a cobalt ferrofluid with strong interparticle interaction , 2015 .

[9]  A. Aly,et al.  Understanding the Mechanism of Nanoparticles Applications in Enhanced Oil Recovery , 2015 .

[10]  S. Nair,et al.  Cement Displacement and Pressure Control Using Magneto-Rheological Fluids , 2015 .

[11]  A. Velásquez,et al.  Influence of Co2+ on the structural and magnetic properties of substituted magnetites obtained by the coprecipitation method , 2015 .

[12]  Jorge Miguel Buciak,et al.  Polymer-Flooding-Pilot Learning Curve: Five-Plus Years’ Experience To Reduce Cost per Incremental Barrel of Oil , 2015 .

[13]  M. Habibi,et al.  FTIR and UV-vis diffuse reflectance spectroscopy studies of the wet chemical (WC) route synthesized nano-structure CoFe(2)O(4) from CoCl(2) and FeCl(3). , 2014, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[14]  S. Genç,et al.  Synthesis and rheology of ferrofluids: a review , 2014 .

[15]  J. M. Buciak,et al.  Polymer Flooding Pilot Learning Curve: 5+ Years Experience to Reduce Cost per Incremental Oil Barrel , 2013 .

[16]  C. Rinaldi,et al.  A comparison of the magnetorheology of two ferrofluids with different magnetic field-dependent chaining behavior , 2013, Rheologica Acta.

[17]  M. E. Khosroshahi,et al.  Preparation and rheological studies of uncoated and PVA-coated magnetite nanofluid , 2012 .

[18]  A. Zubarev,et al.  Colloids on the frontier of ferrofluids. Rheological properties. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[19]  Cocuzza Matteo,et al.  Current and Future Nanotech Applications in the Oil Industry , 2012 .

[20]  H. Nasr-El-Din,et al.  New Gel Aggregates To Improve Sweep Efficiency During Waterflooding , 2011 .

[21]  S. Odenbach,et al.  Magnetoviscous Effects In Ferrofluids , 2000 .

[22]  Jinsheng Sun,et al.  Vital Role of Nanomaterials in Drilling Fluid and Reservoir Protection Applications , 2012 .

[23]  Fangda Qiu.  The Potential Applications in Heavy Oil EOR With the Nanoparticle and Surfactant Stabilized Solvent-Based Emulsion , 2010 .

[24]  D. Tiab.  Chapter 3 – Porosity and Permeability , 2004 .

[25]  Djebbar Tiab,et al.  Porosity and Permeability , 2004 .