Addition of adamantylammonium iodide to hole transport layers enables highly efficient and electroluminescent perovskite solar cells

The efficiency of perovskite solar cells (PSCs) is currently limited by non-radiative recombination losses. One potential loss channel consists of electrons recombining at the interface with the hole transport layer (HTL). We synthesized adamantylammonium halides (ADAHX, X = Cl−, Br−, I−) and demonstrated that ADAHI interacts with the perovskite surface using solid-state NMR spectroscopy. As a result, ADAHI reduces non-radiative recombination when added to the HTL, raising the PSC photovoltage to an average value of 1.185 V, the power conversion efficiency (PCE) to almost 22%, and the maximum external electroluminescence quantum yield to 2.5% at an injection current that is equal to the photocurrent under solar illumination. The lowest value measured for the loss in potential is only 365 mV with respect to the band gap, surpassing the highest-efficiency silicon solar cells. Devices with ADAHI-modified HTL show excellent operational stability for 500 hours. We show the general validity of our new approach for a variety of perovskite formulations and hole conductors.

[1]  Qiang Sun,et al.  Enhancing Efficiency of Perovskite Solar Cells via Surface Passivation with Graphene Oxide Interlayer. , 2017, ACS applied materials & interfaces.

[2]  Dominique Drouin,et al.  CASINO V2.42: a fast and easy-to-use modeling tool for scanning electron microscopy and microanalysis users. , 2007, Scanning.

[3]  Mohammad Khaja Nazeeruddin,et al.  Predicting the Open‐Circuit Voltage of CH3NH3PbI3 Perovskite Solar Cells Using Electroluminescence and Photovoltaic Quantum Efficiency Spectra: the Role of Radiative and Non‐Radiative Recombination , 2015 .

[4]  M. Grätzel,et al.  The Institute of Chemistry of Great Britain and Ireland. Journal and Proceedings. Part II: 1935 , 1935 .

[5]  Anders Hagfeldt,et al.  Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells , 2018 .

[6]  M. Grätzel,et al.  Phase Segregation in Cs-, Rb- and K-Doped Mixed-Cation (MA)x(FA)1–xPbI3 Hybrid Perovskites from Solid-State NMR , 2017, Journal of the American Chemical Society.

[7]  Neha Arora,et al.  Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20% , 2017, Science.

[8]  M. Grätzel.  The light and shade of perovskite solar cells. , 2014, Nature materials.

[9]  C. Brabec,et al.  Interface Engineering of Perovskite Hybrid Solar Cells with Solution-Processed Perylene–Diimide Heterojunctions toward High Performance , 2015 .

[10]  Anders Hagfeldt,et al.  Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance , 2016, Science.

[11]  Zhiyong Fan,et al.  Large‐Grain Tin‐Rich Perovskite Films for Efficient Solar Cells via Metal Alloying Technique , 2018, Advanced materials.

[12]  Sergei Tretiak,et al.  High-efficiency solution-processed perovskite solar cells with millimeter-scale grains , 2015, Science.

[13]  S. Zakeeruddin,et al.  Adamantanes Enhance the Photovoltaic Performance and Operational Stability of Perovskite Solar Cells by Effective Mitigation of Interfacial Defect States , 2018 .

[14]  T. Kitagawa,et al.  Ideal redox behavior of the high-density self-assembled monolayer of a molecular tripod on a Au(111) surface with a terminal ferrocene group. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[15]  A. Djurišić,et al.  Crystal Engineering for Low Defect Density and High Efficiency Hybrid Chemical Vapor Deposition Grown Perovskite Solar Cells. , 2016, ACS applied materials & interfaces.

[16]  Yongzhen Wu,et al.  Enhanced Stability of Perovskite Solar Cells through Corrosion‐Free Pyridine Derivatives in Hole‐Transporting Materials , 2016, Advanced materials.

[17]  Anders Hagfeldt,et al.  Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells. , 2016, ACS nano.

[18]  T. Xu,et al.  Enhanced Performance of Perovskite CH3NH3PbI3 Solar Cell by Using CH3NH3I as Additive in Sequential Deposition. , 2015, ACS applied materials & interfaces.

[19]  Anders Hagfeldt,et al.  Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells , 2017 .

[20]  Konrad Wojciechowski,et al.  Supramolecular halogen bond passivation of organic-inorganic halide perovskite solar cells. , 2014, Nano letters.

[21]  Wei Huang,et al.  Additive engineering for highly efficient organic–inorganic halide perovskite solar cells: recent advances and perspectives , 2017 .

[22]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[23]  Guangda Niu,et al.  Graphene oxide as dual functional interface modifier for improving wettability and retarding recombination in hybrid perovskite solar cells , 2014 .

[24]  Christoph J. Brabec,et al.  A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells , 2017, Science.

[25]  Z. Fan,et al.  High Efficiency and Stable Perovskite Solar Cell Using ZnO/rGO QDs as an Electron Transfer Layer , 2016 .

[26]  Mohammad Khaja Nazeeruddin,et al.  Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency , 2014, Nature Communications.

[27]  Dong Uk Lee,et al.  Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells , 2017, Science.

[28]  Oleksandr Voznyy,et al.  Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes , 2015, Nature Communications.

[29]  R. Tavakoli,et al.  Interface Engineering of Perovskite Solar Cell Using a Reduced-Graphene Scaffold , 2016 .

[30]  Wei Chen,et al.  Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers , 2015, Science.

[31]  M. Green,et al.  Solar cell efficiency tables (version 51) , 2018 .

[32]  Anders Hagfeldt,et al.  Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21% , 2016, Nature Energy.

[33]  Yan Yao,et al.  Highly Efficient Flexible Perovskite Solar Cells with Antireflection and Self-Cleaning Nanostructures. , 2015, ACS nano.

[34]  S. Zakeeruddin,et al.  Isomer‐Pure Bis‐PCBM‐Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability , 2017, Advanced materials.

[35]  M. Grätzel,et al.  Cation Dynamics in Mixed-Cation (MA)x(FA)1-xPbI3 Hybrid Perovskites from Solid-State NMR. , 2017, Journal of the American Chemical Society.

[36]  Jin He,et al.  Fabrication of efficient planar perovskite solar cells using a one-step chemical vapor deposition method , 2015, Scientific Reports.

[37]  Z. Fan,et al.  High-quality organohalide lead perovskite films fabricated by layer-by-layer alternating vacuum deposition for high efficiency photovoltaics , 2017 .

[38]  Mohammad Khaja Nazeeruddin,et al.  Understanding the rate-dependent J–V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field , 2015 .

[39]  Nan Zhang,et al.  Erratum to “Dielectric-Grating-Coupled Surface Plasmon Resonance From the Back Side of the Metal Film for Ultrasensitive Sensing” , 2016, IEEE Photonics Journal.