Highly sensitive and doubly orientated selective molecularly imprinted electrochemical sensor for Cu(2.).

Studies on molecularly imprinted electrochemical sensors for metal ions determination have been widely reported. However, the sensitivity and selectivity of the sensors needs to be improved urgently. In the current work, a novel molecularly imprinted electrochemical sensor was originally developed for selective determination of ultratrace Cu(2+) by combining the metal-ligand chelate orientated recognition with enzyme amplification effect. The detection relied on a competition reaction between Cu(2+)-glycine (Cu-Gly) and horse radish peroxidase (HRP)-labeled Cu-Gly on the imprinted polymer membrane modified electrode. The sensitivity of this sensor was promoted by enzyme amplification. Selectivity was improved by the double-specificity derived from ligand-to-metal ion and metal-ligand chelate orientated recognition of 3D imprinted cavities. This technique was quantitatively sensitive to Cu(2+) concentrations ranging from 0.5nmol/L to 30nmol/L, with a detection limit of 42.4pmol/L. which was lower than those in most of the reported methods. The allowable amounts of interference ions were higher when it compared to other common molecularly imprinted sensors. Moreover, the results of assaying several real samples have proven its feasibility for practical applications.

[1]  Taher Alizadeh,et al.  Application of an Hg2+ selective imprinted polymer as a new modifying agent for the preparation of a novel highly selective and sensitive electrochemical sensor for the determination of ultratrace mercury ions. , 2011, Analytica chimica acta.

[2]  R. Kala,et al.  Ion imprinted polymer based sensor for monitoring toxic uranium in environmental samples. , 2007, Analytica chimica acta.

[3]  Rongning Liang,et al.  Potentiometric Sensor Based on an Ion-Imprinted Polymer for Determination of Copper , 2011 .

[4]  S. Piletsky,et al.  Catalytic molecularly imprinted polymer membranes: development of the biomimetic sensor for phenols detection. , 2010, Analytica chimica acta.

[5]  Zheng-peng Yang,et al.  Designing of MIP-based QCM sensor for the determination of Cu(II) ions in solution , 2009 .

[6]  L. Martínez,et al.  Trace element determination of Argentine wines using ETAAS and USN-ICP-OES. , 2005, Food and chemical toxicology : an international journal published for the British Industrial Biological Research Association.

[7]  Zi‐You Yu,et al.  Cd(II)-imprinted polymer sorbents prepared by combination of surface imprinting technique with hydrothermal assisted sol–gel process for selective removal of cadmium(II) from aqueous solution , 2011 .

[8]  James Noble,et al.  The rational development of molecularly imprinted polymer-based sensors for protein detection. , 2011, Chemical Society reviews.

[9]  Jian-hui Jiang,et al.  Determination of heavy metal ions in mixed solution by imprinted SAMs , 2004 .

[10]  Jianping Li,et al.  Molecularly imprinted sensor based on an enzyme amplifier for ultratrace oxytetracycline determination. , 2010, Analytical chemistry.

[11]  R. Kala,et al.  Ion Imprinted Polymer based Ion-selective Electrode for the Trace Determination of Dysprosium(III) Ions , 2006 .

[12]  L. Ye,et al.  Non‐covalent molecular imprinting with emphasis on its application in separation and drug development , 2006, Journal of molecular recognition : JMR.

[13]  Jianhui Jiang,et al.  Molecularly imprinted TiO(2) thin film using stable ground-state complex as template as applied to selective electrochemical determination of mercury. , 2006, Talanta.

[14]  Jianping Li,et al.  Fabrication of an oxytetracycline molecular-imprinted sensor based on the competition reaction via a GOD-enzymatic amplifier. , 2011, Biosensors & bioelectronics.

[15]  A. Kamel,et al.  Response Characteristics of Copper‐Selective Polymer Membrane Electrodes Based on a Newly Synthesized Macrocyclic Calix[4]arene Derivative as a Neutral Carrier Ionophore , 2010 .

[16]  T. Alizadeh,et al.  Preparation of nano-sized Pb2+ imprinted polymer and its application as the chemical interface of an electrochemical sensor for toxic lead determination in different real samples. , 2011, Journal of hazardous materials.

[17]  A. Hardisson,et al.  Determination of Al, Ba, Ca, Cu, Fe, K, Mg, Mn, Na, Sr and Zn in red wine samples by inductively coupled plasma optical emission spectroscopy: Evaluation of preliminary sample treatments , 2008 .

[18]  Zhihua Wang,et al.  Preparation of electrochemical sensor for lead(II) based on molecularly imprinted film , 2012 .

[19]  Jianping Li,et al.  Highly sensitive molecularly imprinted electrochemical sensor based on the double amplification by an inorganic Prussian blue catalytic polymer and the enzymatic effect of glucose oxidase. , 2012, Analytical chemistry.

[20]  Laszlo Bencs,et al.  Direct sample introduction of wines in graphite furnace atomic absorption spectrometry for the simultaneous determination of arsenic, cadmium, copper and lead content. , 2008, Talanta.

[21]  L. Ye,et al.  Potentiometric propranolol-selective sensor based on molecularly imprinted polymer , 2012, Analytical and Bioanalytical Chemistry.

[22]  K. Haupt,et al.  Toward the use of a molecularly imprinted polymer in doping analysis: selective preconcentration and analysis of testosterone and epitestosterone in human urine. , 2010, Analytical chemistry.

[23]  Jing Fan,et al.  Determination of stability constants of copper(II) complex of glycine in water + alcohol mixed solvents with ion selective electrode technique. , 1995, Talanta.

[24]  A. Turner,et al.  Molecularly imprinted polymers for the recognition of proteins: the state of the art. , 2007, Biosensors & bioelectronics.

[25]  Günter Gauglitz,et al.  Amidine-based molecularly imprinted polymers—new sensitive elements for chiral chemosensors , 2003, Analytical and bioanalytical chemistry.

[26]  B. D. Malhotra,et al.  Molecularly imprinted polyaniline-polyvinyl sulphonic acid composite based sensor for para-nitrophenol detection. , 2013, Analytica chimica acta.

[27]  S. Bektaş,et al.  Preconcentration and determination of iron and copper in spice samples by cloud point extraction and flow injection flame atomic absorption spectrometry. , 2010, Journal of hazardous materials.

[28]  T. Alizadeh,et al.  A carbon paste electrode impregnated with Cd2+ imprinted polymer as a new and high selective electrochemical sensor for determination of ultra-trace Cd2+ in water samples , 2011 .