Revealing Hidden UV Instabilities in Organic Solar Cells by Correlating Device and Material Stability

With state‐of‐the‐art organic solar cells (OSCs) surpassing 16% efficiency, stability becomes critical for commercialization. In this work, the power of using photoluminescence (PL) measurements on plain films is demonstrated, as well as high‐performance liquid chromatography analysis to reveal the origin of UV instabilities in OSCs based on the most commonly used acceptors PC70BM ([6,6]‐phenyl‐C71‐butyric acid methyl ester), ITIC (3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone))‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene), and o‐IDTBR (indacenodithiophene‐based non‐fullerene acceptor). The UV dependent stability tests reveal instabilities in solar cells based on PC70BM and ITIC while devices based on o‐IDTBR are highly stable even under UV illumination. The analysis of solar cell devices based on charge extraction and sub‐bandgap external quantum efficiency only shows the UV‐dependent emergence of traps, while PL spectra of plain films on glass allows the disentanglement and identification of individual instabilities in multi‐component bulk‐heterojunction devices. In particular, the PL analysis demonstrates UV instabilities of PC70BM and ITIC toward the processing additive 1,8 diiodooctane (DIO). The chemical analysis reveals the in‐depth mechanism, by providing direct proof of photochemical reactions of PC70BM and ITIC with UV‐induced radicals of DIO. Based on this scientific understanding, it is shown how to stabilize PBQ‐QF:PC70BM devices.

[1]  Wei Ma,et al.  Single‐Junction Polymer Solar Cells with 16.35% Efficiency Enabled by a Platinum(II) Complexation Strategy , 2019, Advanced materials.

[2]  H. Yao,et al.  Energy level modulation of ITIC derivatives: Effects on the photodegradation of conventional and inverted organic solar cells , 2019, Organic Electronics.

[3]  1,8-diiodooctane acts as a photo-acid in organic solar cells , 2019, Scientific Reports.

[4]  Bryan W. Byles,et al.  Ordering Heterogeneity of [MnO6] Octahedra in Tunnel-Structured MnO2 and Its Influence on Ion Storage , 2019, Joule.

[5]  Vincent M. Le Corre,et al.  Photostability of Fullerene and Non-Fullerene Polymer Solar Cells: The Role of the Acceptor , 2019, ACS applied materials & interfaces.

[6]  C. Brabec,et al.  Efficient Polymer Solar Cells Based on Non-fullerene Acceptors with Potential Device Lifetime Approaching 10 Years , 2019, Joule.

[7]  Yongfang Li,et al.  Precise Control of Crystal Growth for Highly Efficient CsPbI2Br Perovskite Solar Cells , 2019, Joule.

[8]  Martin A. Green,et al.  Solar cell efficiency tables (Version 53) , 2018, Progress in Photovoltaics: Research and Applications.

[9]  C. Brabec,et al.  Absence of Charge Transfer State Enables Very Low VOC Losses in SWCNT:Fullerene Solar Cells , 2018, Advanced Energy Materials.

[10]  Jiaoxian Yu,et al.  How Contact Layers Control Shunting Losses from Pinholes in Thin-Film Solar Cells , 2018, The Journal of Physical Chemistry C.

[11]  Fei Huang,et al.  Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics , 2018, Nature Energy.

[12]  C. Luscombe,et al.  Low Boiling Point Solvent Additives for Improved Photooxidative Stability in Organic Photovoltaics , 2018 .

[13]  J. Durrant,et al.  Stability of Polymer:PCBM Thin Films under Competitive Illumination and Thermal Stress , 2018, Advanced Functional Materials.

[14]  He Yan,et al.  Design rules for minimizing voltage losses in high-efficiency organic solar cells , 2018, Nature Materials.

[15]  F. Gao,et al.  Light-induced degradation of fullerenes in organic solar cells: a case study on TQ1:PC71BM , 2018 .

[16]  Yongsheng Chen,et al.  Ternary Organic Solar Cells With 12.8% Efficiency Using Two Nonfullerene Acceptors With Complementary Absorptions , 2018, Advanced Energy Materials.

[17]  Jie Zhu,et al.  Over 14% Efficiency in Organic Solar Cells Enabled by Chlorinated Nonfullerene Small‐Molecule Acceptors , 2018, Advanced materials.

[18]  H. Ade,et al.  A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells. , 2018, Journal of the American Chemical Society.

[19]  Yongsheng Chen,et al.  A Halogenation Strategy for over 12% Efficiency Nonfullerene Organic Solar Cells , 2018 .

[20]  Yongfang Li,et al.  A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency , 2018, Advanced materials.

[21]  Zhe Li,et al.  The role of fullerenes in the environmental stability of polymer:fullerene solar cells , 2018 .

[22]  Ian E. Jacobs,et al.  Photoinduced degradation from trace 1,8-diiodooctane in organic photovoltaics , 2018 .

[23]  S. Schumann,et al.  The role of donor polymer and PEDOT:PSS formulation on adhesion processes in inverted organic solar cells , 2018 .

[24]  C. Brabec,et al.  Polymer:Nonfullerene Bulk Heterojunction Solar Cells with Exceptionally Low Recombination Rates , 2017 .

[25]  Christoph J. Brabec,et al.  Introducing a New Potential Figure of Merit for Evaluating Microstructure Stability in Photovoltaic Polymer-Fullerene Blends , 2017 .

[26]  QUAN LIU,et al.  Circumventing UV Light Induced Nanomorphology Disorder to Achieve Long Lifetime PTB7‐Th:PCBM Based Solar Cells , 2017 .

[27]  R. Chiechi,et al.  Relating polymer chemical structure to the stability of polymer:fullerene solar cells , 2017 .

[28]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[29]  L. Lüer,et al.  Stability of Organic Solar Cells: The Influence of Nanostructured Carbon Materials , 2017 .

[30]  Michael D. McGehee,et al.  Progress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics , 2017, Advanced materials.

[31]  C. J. M. Emmott,et al.  Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. , 2017, Nature materials.

[32]  Christoph J. Brabec,et al.  Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing , 2017, Nature Communications.

[33]  H. Ade,et al.  Efficient Charge Transfer and Fine‐Tuned Energy Level Alignment in a THF‐Processed Fullerene‐Free Organic Solar Cell with 11.3% Efficiency , 2017, Advanced materials.

[34]  Alberto Salleo,et al.  High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor , 2016, Nature Communications.

[35]  Andrew J Pearson,et al.  Critical light instability in CB/DIO processed PBDTTT-EFT:PC71BM organic photovoltaic devices , 2016 .

[36]  Bertrand J. Tremolet de Villers,et al.  Removal of Residual Diiodooctane Improves Photostability of High-Performance Organic Solar Cell Polymers , 2016 .

[37]  C. Brabec,et al.  Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability , 2016 .

[38]  F. Krebs,et al.  Lifetime of Organic Photovoltaics: Status and Predictions , 2016 .

[39]  Timothy M. Burke,et al.  Disorder‐Induced Open‐Circuit Voltage Losses in Organic Solar Cells During Photoinduced Burn‐In , 2015 .

[40]  G. Ho,et al.  Device Stability and Light-Soaking Characteristics of High-Efficiency Benzodithiophene-Thienothiophene Copolymer-Based Inverted Organic Solar Cells with F-TiO(x) Electron-Transport Layer. , 2015, ACS applied materials & interfaces.

[41]  Ulf Dettinger,et al.  FTIR Study of the Impact of PC[60]BM on the Photodegradation of the Low Band Gap Polymer PCPDTBT under O-2 Environment , 2015 .

[42]  T. Ahn,et al.  Conflicted Effects of a Solvent Additive on PTB7:PC71BM Bulk Heterojunction Solar Cells , 2015 .

[43]  Umut Aygül,et al.  Photodegradation of C-PCPDTBT and Si-PCPDTBT: influence of the bridging atom on the stability of a low-band-gap polymer for solar cell application. , 2015, Chemphyschem : a European journal of chemical physics and physical chemistry.

[44]  George D. Spyropoulos,et al.  Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes , 2015 .

[45]  C. Brabec,et al.  A solution-processed barium hydroxide modified aluminum doped zinc oxide layer for highly efficient inverted organic solar cells , 2014 .

[46]  Kion Norrman,et al.  New Insights into the Mechanisms of Photodegradation/Stabilization of P3HT:PCBM Active Layers Using Poly(3-hexyl-d13-Thiophene) , 2013 .

[47]  Ian E. Jacobs,et al.  Correlating dilute solvent interactions to morphology and OPV device performance , 2013 .

[48]  Long Ye,et al.  Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells , 2013 .

[49]  H. Peisert,et al.  Wavelength-Dependent Pathways of Poly-3-hexylthiophene Photo-Oxidation , 2012 .

[50]  Klaus Meerholz,et al.  Effect of Trace Solvent on the Morphology of P3HT:PCBM Bulk Heterojunction Solar Cells , 2011 .