Piezoelectric energy harvesting from multifunctional wing spars for UAVs: Part 2. Experiments and storage applications

This paper is the second part of a two-part series investigating the development of multifunctional piezoelectric energy harvesting devices to be used in unmanned aerial vehicle and micro air vehicle applications. The proposed self-charging structures include piezoelectric layers and novel thin-film battery layers bonded to a substrate layer in order to create a multilayer, self-charging, load bearing energy harvesting device. Part 1 of this work (coupled modeling and preliminary analysis) presents a distributed parameter electromechanical model used to predict the response of the proposed selfcharging structures under harmonic base excitation. The model is compared to experimental results and found to be quite accurate. This paper investigates the fabrication and experimental evaluation of the self-charging structures. A detailed analysis of the thin-film batteries used in the self-charging structures is carried out, and their electrical and mechanical performance is evaluated. Typical charge and discharge curves are generated and analyzed. The fabrication process involved in creating self-charging structures is also outlined, including details on bonding of the layers and establishing electrical connections. A simple energy harvesting circuit is designed to allow the transfer of energy from the piezoelectric layers to the battery layers. Lastly, the energy harvesting performance of the self-charging structure is evaluated and typical charge and discharge time histories are recorded for the structure under base excitations.

[1]  Mickaël Lallart,et al.  Double synchronized switch harvesting (DSSH): a new energy harvesting scheme for efficient energy extraction , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  Tony Pereira,et al.  Embedding thin-film lithium energy cells in structural composites , 2008 .

[3]  J. D. Robertson,et al.  Electrical properties of amorphous lithium electrolyte thin films , 1992 .

[4]  D. Guyomar,et al.  Buck-Boost Converter for Sensorless Power Optimization of Piezoelectric Energy Harvester , 2007, IEEE Transactions on Power Electronics.

[5]  Ann Marie Sastry,et al.  Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems , 2008 .

[6]  Daniel J. Inman,et al.  Vibration energy harvesting for unmanned aerial vehicles , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  Tony Pereira,et al.  Performance of Thin‐Film Lithium Energy Cells under Uniaxial Pressure , 2008 .

[8]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[9]  Ji-Won Choi,et al.  Issue and challenges facing rechargeable thin film lithium batteries , 2008 .

[10]  G. Jellison,et al.  A Stable Thin‐Film Lithium Electrolyte: Lithium Phosphorus Oxynitride , 1997 .

[11]  Daniel J. Inman,et al.  Piezoelectric energy harvesting from multifunctional wing spars for UAVs: Part 1. Coupled modeling and preliminary analysis , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Tony Pereira,et al.  The performance of thin-film Li-ion batteries under flexural deflection , 2006 .