Optimal shape design of functionally graded thickness inversion tubes subjected to oblique loading

This paper aims to understand and optimize the crush response of Functionally Graded Thickness (FGT) tubes with various thickness distributions subjected to oblique loading using multi-objective optimization method. Hence, finite element (FE) models are established and their results are validated by experimental tests. Two objective functions (specific energy absorption and peak load) are approximated by four different multi-objective optimization models: the weighted average, multi-design optimization (MDO) technique, constrained single-objective optimization, and geometrical average methods. The optimum design results demonstrate that the selection of appropriate inversion tube parameters such as the die radius, the coefficient of friction between the die and tube, and thickness distribution function have significant roles in the crashworthiness design. The results give new ideas to improve the crashworthiness performance of inversion tubes under oblique loading conditions.

[1]  Levent Aktay,et al.  FE and coupled FE/SPH modeling of the quasi-static crushing of empty and foam-filled single, bitubular and constraint hexagonal- and square-packed aluminum tubes , 2006 .

[2]  O. Hopperstad,et al.  Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study , 2004 .

[3]  David P. Thambiratnam,et al.  Computer simulation and energy absorption of tapered thin-walled rectangular tubes , 2005 .

[4]  O. Hopperstad,et al.  Square aluminum tubes subjected to oblique loading , 2003 .

[5]  R. Karimi,et al.  Finite element analysis of deformation and fracture of an exploded gas cylinder , 2009 .

[6]  S. Al-Hassani,et al.  Characteristics of Inversion Tubes under Axial Loading , 1972 .

[7]  Zhong You,et al.  Energy absorption of axially compressed thin-walled square tubes with patterns , 2007 .

[8]  J. Marsolek,et al.  Energy absorption of metallic cylindrical shells with induced non-axisymmetric folding patterns , 2004 .

[9]  Qing Li,et al.  Design of transversely-graded foam and wall thickness structures for crashworthiness criteria , 2016 .

[10]  Wei Li,et al.  Multiobjective optimization of multi-cell sections for the crashworthiness design , 2008 .

[11]  P. Hosseini-Tehrani,et al.  Study on the collapse of tapered tubes subjected to oblique loads , 2008 .

[12]  Guangyao Li,et al.  Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models , 2013 .

[13]  Abdulmalik A. Alghamdi,et al.  Collapsible impact energy absorbers: an overview , 2001 .

[14]  Qing Li,et al.  A comparative study on thin-walled structures with functionally graded thickness (FGT) and tapered tubes withstanding oblique impact loading , 2015 .

[15]  H. A. Al-Qureshi,et al.  Mechanics of static and dynamic inversion processes , 1997 .

[16]  Shu Yang,et al.  Multiobjective optimization for empty and foam-filled square columns under oblique impact loading , 2013 .

[17]  Hoon Huh,et al.  Energy absorption of longitudinally grooved square tubes under axial compression , 2009 .

[18]  David P. Thambiratnam,et al.  Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading , 2009 .

[19]  Sadjad Pirmohammad,et al.  Collapse study of thin-walled polygonal section columns subjected to oblique loads , 2007 .

[20]  G. S. Sekhon,et al.  An analysis of external inversion of round tubes , 2003 .

[21]  Hui Zhang,et al.  Energy absorption of multi-cell stub columns under axial compression , 2013 .

[22]  Shiwei Zhou,et al.  Crashworthiness design for functionally graded foam-filled thin-walled structures , 2010 .

[23]  Mehdi Tajdari,et al.  Attempts to improve energy absorption characteristics of circular metal tubes subjected to axial loading , 2010 .

[24]  O. Hopperstad,et al.  Crashworthiness of aluminum extrusions subjected to oblique loading: experiments and numerical analyses , 2002 .

[25]  Paulo A.F. Martins,et al.  An investigation on the external inversion of thin-walled tubes using a die , 2004 .

[26]  H. Zarei,et al.  Optimum honeycomb filled crash absorber design , 2008 .

[27]  L. R. Guist,et al.  Prediction of the inversion load of a circular tube , 1966 .

[28]  Saeed Ziaei-Rad,et al.  Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings , 2008 .

[29]  Hongbing Fang,et al.  Multi-objective robust optimization of foam-filled tapered multi-cell thin-walled structures , 2015, Structural and Multidisciplinary Optimization.

[30]  O. Mohammadiha,et al.  Crush behavior optimization of multi-tubes filled by functionally graded foam , 2016 .

[31]  Xiong Zhang,et al.  Axial crushing of circular multi-cell columns , 2014 .

[32]  Jianguang Fang,et al.  Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness , 2015 .

[33]  Jianguang Fang,et al.  On design optimization for structural crashworthiness and its state of the art , 2017 .

[34]  T. Y. Reddy,et al.  Guist and marble revisited : on the natural knuckle radius in tube inversion , 1992 .

[35]  Qing Li,et al.  Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness , 2014 .

[36]  Qing Li,et al.  Multiobjective optimization for crash safety design of vehicles using stepwise regression model , 2008 .

[37]  N. Jones,et al.  Inertia effects in axisymmetrically deformed cylindrical shells under axial impact , 2000 .

[38]  David P. Thambiratnam,et al.  Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures , 2009 .

[39]  Hui Zhang,et al.  Crashworthiness performance of conical tubes with nonlinear thickness distribution , 2016 .