Receive Mode Time-Modulated Antenna Array Incorporating Subsampling—Theoretical Concept and Laboratory Investigation

An eight element Subsampling Time Modulated Array (STMA) operating in receive mode with a carrier at 2.4 GHz is presented and demonstrated using bespoke Radio Frequency (RF) hardware. Each STMA cell incorporates subsampling functionality, with the sampling frequency significantly below the carrier frequency and requiring minimal additional hardware. By using this concept, the hardware required for a receiver incorporating an antenna array can be reduced and costs saved. STMA design equations and architecture strategies are presented, and a prototype hardware demonstrator is introduced. Laboratory measurements confirm that a received radiated signal, arranged to use the fundamental or a harmonic beam pointed at the radiating source, can be resolved from the subsampled intermediate frequency (IF) output. The concept demonstration hardware provides a measured array conversion gain of 11.4 dBi on the boresight beam, 7.8 dBi on the first positive and 11.3 dBi on the first negative harmonic beams, as resolved at the final combined IF output. The array IF output Signal to Noise and Distortion ratio is 69 dB. The dependence of array sidelobe level performance on STMA sampling switch rise time is also uncovered, though good performance with real, imperfect, hardware is still obtained.