High formability of glass plus fcc-Al phases in rapidly solidified Al-based multicomponent alloy

[1]  E. Ma,et al.  Designing aluminum-rich bulk metallic glasses via electronic-structure-guided microalloying , 2016 .

[2]  A. Inoue,et al.  Development and Applications of Highly Functional Al-based Materials by Use of Metastable Phases , 2015 .

[3]  D. V. Louzguine-Luzgin,et al.  Crystal growth limitation as a critical factor for formation of Fe-based bulk metallic glasses , 2015 .

[4]  T. Watson,et al.  Phase stability in a powder-processed Al–Mn–Ce alloy , 2014, Journal of Materials Science.

[5]  R. Yamada,et al.  Recovery of less relaxed state in Zr-Al-Ni-Cu bulk metallic glass annealed above glass transition temperature , 2013 .

[6]  D. V. Louzguine-Luzgin,et al.  Enhance the thermal stability and glass forming ability of Al-based metallic glass by Ca minor-alloying , 2012 .

[7]  Yongliang Shao,et al.  Characterization of dislocation etch pits in HVPE-grown GaN using different wet chemical etching methods , 2010 .

[8]  A. Hirata,et al.  Quasicrystal-like structure and its crystalline approximant in an Fe48Cr15Mo14C15B6Tm2 bulk metallic glass , 2010 .

[9]  Gencang Yang,et al.  Microstructure and mechanical properties of Al-base composites by addition of Al–Ni–Co decagonal quasicrystalline particles through a mechanical stirring route , 2010 .

[10]  L. Yongxiang,et al.  Improvement in Dielectric Tunability of Ba 0.6 Sr 0.4 TiO 4 -Mg 2 TiO 4 Composite Ceramics via Heterogeneous Nucleation Processing , 2009 .

[11]  A. Hirata,et al.  Fe23B6-type quasicrystal-like structures without icosahedral atomic arrangement in an Fe-based metallic glass , 2009 .

[12]  W. Hui,et al.  Ductile Bulk Aluminum-Based Alloy with Good Glass-Forming Ability and High Strength , 2009 .

[13]  J. S. Kim,et al.  Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites , 2008 .

[14]  Jingsheng Wang,et al.  Glass formability and structural stability of Al-based alloy systems , 2007 .

[15]  Akira Takeuchi,et al.  Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element , 2005 .

[16]  E. .. Mittemeijer,et al.  The Al Nano-Crystallization Process in Amorphous Al85Ni8Y5Co2 , 2005 .

[17]  J. Eckert,et al.  Synthesis and thermal stability of ball-milled and melt-quenched amorphous and nanostructured Al-Ni-Nd-Co alloys , 2004 .

[18]  A. Inoue,et al.  Ultrahigh strength Al-based amorphous alloys containing Sc , 2004 .

[19]  Xiao-liang Liu,et al.  Influences of xTi/xAl on atomic states, lattice constants and potential-energy planes of ordered FCC TiAl-type alloys , 2004 .

[20]  A. Inoue,et al.  Crystallization behaviour of Al-based metallic glasses below and above the glass-transition temperature , 2002 .

[21]  K. Amiya,et al.  Developments of Aluminum- and Magnesium-Based Nanophase High-Strength Alloys by Use of Melt Quenching-Induced Metastable Phase , 2002 .

[22]  A. Inoue,et al.  Investigation of Structure and Properties of the Al–Y–Ni–Co–Cu Metallic Glasses , 2002 .

[23]  A. Inoue,et al.  Influence of a supercooled liquid on crystallization behaviour of Al–Y–Ni–Co metallic glass , 2002 .

[24]  C. Kiminami,et al.  Crystallization behavior of amorphous Al84Y9Ni5Co2 alloy , 2001 .

[25]  A. Inoue,et al.  Full or partial replacement of Y by rare-earth and some other elements in the Al85Y8Ni5Co2 alloy , 2001 .

[26]  C. Kiminami,et al.  Phases formed during crystallization of amorphous Al84Y9Ni5Co2 alloy , 2000 .

[27]  Akihisa Inoue,et al.  High-strength aluminum alloys containing nanoquasicrystalline particles , 2000 .

[28]  M. Janeček,et al.  Structure and properties of rapidly solidified Al-Zr-Ti alloys , 2000 .

[29]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[30]  A. Inoue.  Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems , 1998 .

[31]  T. Masumoto,et al.  Readily superplastic forging at high strain rates in an aluminium-based alloy produced from nanocrystalline powders , 1994, Journal of Materials Science.

[32]  A. Inoue,et al.  Effect of Cu or Ag on the formation of coexistent nanoscale Al particles in Al-Ni-M-Ce (M = Cu or Ag) amorphous alloys , 1994 .

[33]  Joseph R. Davis,et al.  Special Features of Structure Formation and Properties of Special High-Alloy Alloys of the Al – Si – Cu System , 2023, Metal Science and Heat Treatment.

[34]  A. Inoue,et al.  Elevated-temperature strength of an Al88Ni9Ce2Fe1 amorphous alloy containing nanoscale fcc-Al particles , 1992 .

[35]  T. Nieh,et al.  High-strain-rate superplasticity in aluminum matrix composites , 1991 .

[36]  A. Inoue,et al.  Ultrahigh mechanical strengths of Al88Y2Ni10-xMx (M = Mn, Fe or Co) amorphous alloys containing nanoscale fcc-Al particles , 1991 .

[37]  A. Inoue,et al.  Al–Ni–Y–Co Amorphous Alloys with High Mechanical Strengths, Wide Supercooled Liquid Region and Large Glass-Forming Capacity , 1990 .

[38]  S. Poon,et al.  Synthesis and Properties of Metallic Glasses That Contain Aluminum , 1988, Science.

[39]  A. Inoue,et al.  New Amorphous Al-Y, Al-La and Al-Ce Alloys Prepared by Melt Spinning , 1988 .

[40]  A. Inoue,et al.  Aluminum-Based Amorphous Alloys with Tensile Strength above 980 MPa (100 kg/mm2) , 1988 .

[41]  A. Inoue,et al.  Ductile aluminium-base amorphous alloys with two separate phases , 1987 .