Model of Inclusion Evolution During Calcium Treatment in the Ladle Furnace

Calcium treatment of steel is typically employed to modify alumina inclusions to liquid calcium aluminates. However, injected calcium also reacts with the dissolved sulfur to form calcium sulfide. The current work aims to develop a kinetic model for the evolution of oxide and sulfide inclusions in Al-killed alloyed steel during Ca treatment in the ladle refining process. The model considers dissolution of the calcium from the calcium bubbles into the steel and reduction of calcium oxide in the slag to dissolved calcium. A steel–inclusion kinetic model is used for mass transfer to the inclusion interface and diffusion within the calcium aluminate phases formed on the inclusion. The inclusion–steel kinetic model is then coupled with a previously developed steel–slag kinetic model. The coupled inclusion–steel–slag kinetic model is applied to the chemical composition changes in molten steel, slag, and evolution of inclusions in the ladle. The result of calculations is found to agree well with an industrial heat for species in the steel as well as inclusions during Ca treatment.

[1]  E. T. Turkdogan Fundamentals of steelmaking , 1996 .

[2]  G. G. Roy,et al.  Efficacy and recovery of calcium during CaSi cored wire injection in steel melts , 2010 .

[3]  P. Wang,et al.  The calcium-phosphorus and the simultaneous calcium-oxygen and calcium-sulfur equilibria in liquid iron , 1988 .

[4]  A. Ghosh,et al.  Secondary Steelmaking: Principles and Applications , 2000 .

[5]  J. Shin,et al.  Modification of Inclusions in Molten Steel by Mg-Ca Transfer from Top Slag: Experimental Confirmation of the ‘Refractory-Slag-Metal-Inclusion (ReSMI)’ Multiphase Reaction Model , 2017, Metallurgical and Materials Transactions B.

[6]  Jiaoyang Li,et al.  Modification of MgO·Al2O3 spinel inclusions in Al-killed steel by Ca-treatment , 2011 .

[7]  Y. Kato,et al.  Kinetics of Shape Control of Alumina Inclusions with Calcium Treatment in Line Pipe Steel for Sour Service , 1996 .

[8]  J. Shin,et al.  Refractory–Slag–Metal–Inclusion Multiphase Reactions Modeling Using Computational Thermodynamics: Kinetic Model for Prediction of Inclusion Evolution in Molten Steel , 2017, Metallurgical and Materials Transactions B.

[9]  日野 光兀,et al.  Thermodynamic data for steelmaking , 2010 .

[10]  A. Vilela,et al.  Assessment of inclusion analysis via manual and automated SEM and total oxygen content of steel , 2015 .

[11]  Gunnar Eriksson,et al.  FactSage thermochemical software and databases - recent developments , 2009 .

[12]  M. Numata,et al.  Inclusion Modification by Calcium Treatment , 1996 .

[13]  Gunnar Eriksson,et al.  FactSage thermochemical software and databases , 2002 .

[14]  Ding Lu,et al.  Kinetics and mechanisms of calcium dussolution and modification of oxide and sulphide inclusions in steel , 1994 .

[15]  Petrus Christiaan Pistorius,et al.  Transient Inclusion Evolution During Modification of Alumina Inclusions by Calcium in Liquid Steel: Part I. Background, Experimental Techniques and Analysis Methods , 2011 .

[16]  M. Biglari,et al.  Simulation of the calcium treatment of aluminium killed steel , 2008 .

[17]  I. W. Martin,et al.  Formation of alumina in steel and its dissemination during mechanical working , 1979 .

[18]  O. Levenspiel Chemical Reaction Engineering , 1972 .

[19]  D. Liao,et al.  Inclusion Control with Ca Treatment to Improve Castability of Low Carbon Aluminum-Killed Steel , 2017 .

[20]  Z. J. Han MECHANISM AND KINETICS OF TRANSFORMATION OF ALUMINA INCLUSIONS BY CALCIUM TREATMENT , 2006 .

[21]  P. Pistorius,et al.  A Study on Calcium Transfer from Slag to Steel and its Effect on Modification of Alumina and Spinel Inclusions , 2016 .

[22]  J. Szekely,et al.  Rate phenomena in process metallurgy , 1971 .

[23]  P. Pistorius,et al.  Calcium Modification of Spinel Inclusions in Aluminum-Killed Steel: Reaction Steps , 2012, Metallurgical and Materials Transactions B.

[24]  Z. Yansheng,et al.  A STUDY ON NON-MAGNETIC AND CRYOGENIC STEEL 30Mn20A13 , 1983 .

[25]  B. Deo,et al.  Multicomponent Mixed-Transport-Control Theory for Kinetics of Coupled Slag/Metal and Slag/Metal/Gas Reactions: Application to Desulphurization of Molten Iron , 1984 .

[26]  G. G. Stokes "J." , 1890, The New Yale Book of Quotations.

[27]  H. Shibata,et al.  Kinetic Analysis of Compositional Changes in Inclusions during Ladle Refining , 2014 .

[28]  H. Shibata,et al.  A Kinetic Model to Predict the Compositions of Metal, Slag and Inclusions during Ladle Refining: Part 1. Basic Concept and Application , 2013 .

[29]  Franz Oeters,et al.  Metallurgy of steelmaking , 1994 .

[30]  W. Wegscheider,et al.  Qualitative and quantitative determination of micro-inclusions by automated SEM/EDX analysis , 2004, Analytical and bioanalytical chemistry.

[31]  W. Wuth Rate Phenomena in Process Metallurgy. Von J. Szekely u. N. J. Themelis. Wiley Interscience, a Division of John Wiley & Sons Inc., New York-London-Sydney-Toronto 1971. 1. Aufl., 754 S., 28 Tab., 353 Abb., Ln £ 12.00. , 1972 .

[32]  C. M. Sellars,et al.  Worked Examples in Quantitative Metallography , 2003 .