EFFECTS OF ELEVATED TEMPERATURE AND RE-CURING ON THE PROPERTIES OF MORTARS CONTAINING INDUSTRIAL WASTE MATERIALS
暂无分享,去创建一个
[1] Ali Sadrmomtazi,et al. INFLUENCE OF POLYPROPYLENE FIBERS ON THE PERFORMANCE OF NANO-SIO2-INCORPORATED MORTAR , 2010 .
[2] Zoubeir Lafhaj,et al. Experimental Study on a Mortar. Temperature Effects on Porosity and Permeability. Residual Properties or Direct Measurements Under Temperature , 2005 .
[3] Roberto Felicetti,et al. The drilling resistance test for the assessment of fire damaged concrete , 2006 .
[4] O. Simsek,et al. Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and superplasticizer , 2008 .
[5] J. Shao,et al. Experimental and micro-mechanical analysis of the mechanical and transport properties of mortar containing heat-induced micro-cracks , 2010 .
[6] M. Shoaib,et al. Effect of fire and cooling mode on the properties of slag mortars , 2001 .
[7] Hui Li,et al. A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials , 2004 .
[8] N. Jain. Effect of nonpozzolanic and pozzolanic mineral admixtures on the hydration behavior of ordinary Portland cement , 2012 .
[9] J. M. Chimenos,et al. Novel fire-protecting mortars formulated with magnesium by-products , 2011 .
[10] O. Arioz. Effects of elevated temperatures on properties of concrete , 2007 .
[11] Deng-Fong Lin,et al. Study the surface color of sewage sludge mortar at high temperature , 2007 .
[12] P. Bowen,et al. Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment , 2011 .
[13] S. Wild,et al. Strength and chemical resistance of mortars containing brick manufacturing clays subjected to different treatments , 2006 .
[14] Mark F. Green,et al. Experimental evaluation of the fire behaviour of insulated fibre-reinforced-polymer-strengthened reinforced concrete columns , 2006 .
[15] Leyla Dokuzer Öztürk,et al. COMPRESSIVE STRENGTH-COLOR CHANGE RELATION IN MORTARS AT HIGH TEMPERATURE , 2004 .
[16] Z. Shui,et al. Rehydration activity of hydrated cement paste exposed to high temperature , 2011 .
[17] E. Ganjian,et al. The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag , 2009 .
[18] Jay G. Sanjayan,et al. Effect of elevated temperatures on geopolymer paste, mortar and concrete , 2010 .
[19] G. Peng,et al. Effect of thermal shock due to rapid cooling on residual mechanical properties of fiber concrete exposed to high temperatures , 2008 .
[20] Her-Yung Wang,et al. Assessment of Fire-Damaged Mortar Using Digital Image Process , 2004 .
[21] A. Kesimal,et al. POZZOLANIC CHARACTERISTICS OF A NATURAL RAW MATERIAL FOR USE IN BLENDED CEMENTS , 2009 .
[22] P. K. Mehta. Studies on blended Portland cements containing Santorin earth , 1981 .
[23] Emil Makovicky,et al. Pozzolanic reactions of six principal clay minerals: Activation, reactivity assessments and technological effects , 1995 .
[24] Jong-Shin Huang,et al. Fire performance of highly flowable reactive powder concrete , 2009 .
[25] T. Özturan,et al. Durability of lightweight concretes with lightweight fly ash aggregates , 2011 .
[26] Azree Othuman,et al. Elevated-temperature thermal properties of lightweight foamed concrete , 2011 .