A novel envelope edge detector for ultra-low power sensor wake-up circuit

Voltage comparators have been widely used in low-power sensor wake-up circuits for extracting digital bits from the envelope of received RF signals. This paper presents an alternative circuit to such comparators. The proposed circuit extracts digital bits by detecting the falling edge of the envelope signal. Since it essentially compares the values of the same signal at different times, it is potentially more robust than the comparator based approach, which compares the peak voltage of the envelope signal with another reference voltage. The design issues for using the proposed edge detection circuit into different wake-up receiver architectures are discussed and simulation results are also presented to demonstrate the performance of the proposed circuit.

[1]  Emanuel Popovici,et al.  Nano-power Wake-Up Radio circuit for Wireless Body Area Networks , 2011, 2011 IEEE Radio and Wireless Symposium.

[2]  Masayuki Ikebe,et al.  Low-power wake-up receiver with subthreshold CMOS circuits for wireless sensor networks , 2013 .

[3]  S. Gambini,et al.  A 52 $\mu$ W Wake-Up Receiver With $-$ 72 dBm Sensitivity Using an Uncertain-IF Architecture , 2009, IEEE Journal of Solid-State Circuits.

[4]  Achintya Halder,et al.  An Ultra-low Power Symbol Detection Methodology and Its Circuit Implementation for a Wake-up Receiver in Wireless Sensor Nodes , 2012, 2012 25th International Conference on VLSI Design.

[5]  Chenling Huang,et al.  A two-stage wake-up circuit for semi-passive RFID tag , 2009, 2009 IEEE 8th International Conference on ASIC.

[6]  Jan M. Rabaey,et al.  A 65 μW, 1.9 GHz RF to digital baseband wakeup receiver for wireless sensor nodes , 2007, 2007 IEEE Custom Integrated Circuits Conference.

[7]  Dong Sam Ha,et al.  Low power wake-up receiver with unique node addressing , 2011, 2011 IEEE 54th International Midwest Symposium on Circuits and Systems (MWSCAS).

[8]  Thomas Herndl,et al.  A 2.4µW Wake-up Receiver for wireless sensor nodes with −71dBm sensitivity , 2011, 2011 IEEE International Symposium of Circuits and Systems (ISCAS).

[9]  Joonhyung Lim,et al.  High sensitive RF-DC rectifier and ultra low power DC sensing circuit for waking up wireless system , 2009, 2009 Asia Pacific Microwave Conference.

[10]  Emil Nilsson,et al.  Ultra Low Power Wake-Up Radio Using Envelope Detector and Transmission Line Voltage Transformer , 2013, IEEE Journal on Emerging and Selected Topics in Circuits and Systems.

[11]  N. E. Roberts,et al.  A 98nW wake-up radio for wireless body area networks , 2012, 2012 IEEE Radio Frequency Integrated Circuits Symposium.

[12]  Hyungchul Kim,et al.  CMOS passive wake-up circuit for sensor network applications , 2010 .

[13]  Kofi A. A. Makinwa,et al.  A 2.4GHz 830pJ/bit duty-cycled wake-up receiver with −82dBm sensitivity for crystal-less wireless sensor nodes , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[14]  G. Boeck,et al.  Three stage wakeup scheme for sensor networks , 2005, SBMO/IEEE MTT-S International Conference on Microwave and Optoelectronics, 2005..