Dynamic periodic observer for a combustion engine test bench

In recent years, shortening of the total development cycle for a completed vehicle and reduction of on-board vehicle calibration are increasing in demand in the research and development process in the automotive industry. To meet this demand, the solution is to provide well-suited testbenches. For that, dynamic estimation of the torque produced by the engine is required. The purpose of the paper is to provide a dynamic estimation of the engine torque. Convergence of the observer is proven and experimental results are reported.

[1]  Engelbert Grünbacher,et al.  Discrete-time nonlinear observer and output feedback design for a combustion engine test bench , 2008, 2008 47th IEEE Conference on Decision and Control.

[2]  Uwe Kiencke,et al.  ESTIMATION OF THE INSTANTANEOUS ENGINE TORQUE FOR VEHICLES WITH DUAL MASS FLYWHEEL (DMF) , 2007 .

[3]  Sophie Tarbouriech,et al.  Output-reference tracking problem for discrete-time systems with input saturations , 2000 .

[4]  W. Wonham,et al.  The internal model principle for linear multivariable regulators , 1975 .

[5]  Isabelle Queinnec,et al.  Anti-windup design for aircraft flight control , 2006, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control.

[6]  Christopher I. Byrnes,et al.  Output regulation for nonlinear systems: an overview , 2000 .

[7]  W. E. Schmitendorf,et al.  Stabilization via Dynamic Output Feedback: A Numerical Approach , 1991 .

[8]  E. Davison The robust control of a servomechanism problem for linear time-invariant multivariable systems , 1976 .

[9]  Engelbert Grünbacher,et al.  Nonlinear observer and output feedback design for a combustion engine test bench , 2008 .

[10]  Y. Sawada,et al.  Control of Standard Engine Test Bench System for Dynamic Road Load Tests , 2006, 2006 SICE-ICASE International Joint Conference.

[11]  Diego Eckhard,et al.  On the Tracking Problem for Linear Systems subject to Control Saturation , 2008 .

[12]  Myung Jin Chung,et al.  Repetitive control design for linear systems with time-varying uncertainties , 2003 .

[13]  Sophie Tarbouriech,et al.  Output tracking problem for systems with input saturations via nonlinear integrating actions , 2000 .

[14]  Pierre Rouchon,et al.  Periodic input estimation for linear periodic systems: Automotive engine applications , 2007, Autom..

[15]  S. Hara,et al.  Repetitive control system: a new type servo system for periodic exogenous signals , 1988 .

[16]  Daniel Sbarbaro,et al.  THE WINDUP PROBLEM IN REPETITIVE CONTROL: A SIMPLE ANTI-WINDUP STRATEGY , 2006 .

[17]  David G. Ward,et al.  Anti-windup design of output tracking systems subject to actuator saturation and constant disturbances , 2004, Autom..

[18]  S. Tarbouriech,et al.  Anti-windup design with guaranteed regions of stability: an LMI-based approach , 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

[19]  Jon Rigelsford,et al.  Automotive Control Systems: For Engine, Driveline and Vehicle , 2004 .

[20]  Myung Jin Chung,et al.  Design of a repetitive controller: an application to the track-following servo system of optical disk drives , 2006 .