An optimal reactive power control for isolated modular DC/DC converter system

This paper presents an optimal reactive power control in isolated modular DC/DC converter (IMDCC) system based on theoretical and simulated discussions. The system configuration ties two DC grids by using two modular multilevel converters (MMCs) via an AC transformer, which causes the reactive power consuming and will affect the transferrable active power. Then the discussions conclude that the maximum transferrable active power in IMDCC system can be achieved when the reactive power is equally distributed between both MMC stations, which have been ignored by previous research. Finally, the circuit configuration and the control method are described along with simulated and experimental results that verify the effectiveness.

[1]  Rik W. De Doncker,et al.  Comparison of the Modular Multilevel DC Converter and the Dual-Active Bridge Converter for Power Conversion in HVDC and MVDC Grids , 2015, IEEE Transactions on Power Electronics.

[2]  Robert Whitehouse,et al.  Requirements of DC-DC Converters to facilitate large DC Grids , 2012 .

[3]  F. Canales,et al.  Modular DC/DC converter: Comparison of modulation methods , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).

[4]  J. A. Ferreira,et al.  The Multilevel Modular DC Converter , 2013, IEEE Transactions on Power Electronics.

[5]  H. Akagi,et al.  Control and Experiment of Pulsewidth-Modulated Modular Multilevel Converters , 2009, IEEE Transactions on Power Electronics.

[6]  Liu Jun Selection and Calculation for Sub-module Capacitance in Modular Multi-level Converter HVDC Power Transmission System , 2011 .

[7]  Weixing Lin,et al.  DC–DC Autotransformer With Bidirectional DC Fault Isolating Capability , 2016, IEEE Transactions on Power Electronics.

[8]  Boon Teck Ooi,et al.  Developing DC Transmission Networks Using DC Transformers , 2010, IEEE Transactions on Power Delivery.

[9]  Dirk Westermann,et al.  Voltage source converter (VSC) HVDC for bulk power transmission - technology and planning method , 2010 .

[10]  Drazen Dujic,et al.  Isolated DC/DC Structure Based on Modular Multilevel Converter , 2015, IEEE Transactions on Power Electronics.

[11]  Andre Schon,et al.  A new HVDC-DC converter with inherent fault clearing capability , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).