A first step towards a simple in-line shape compensation routine for the roll forming of high strength steel

The roll forming process is increasingly used in the automotive industry for the manufacture of structural and crash components from Ultra High Strength Steel (UHSS). Due to the high strength of UHSS (<1GPa) even small and commonly observed material property variations from coil to coil can result in significant changes in material yield and through that affect the final shape of the roll formed component. This requires the re-adjustment of tooling to compensate for shape defects and maintain part geometry resulting in costly downtimes of equipment. This paper presents a first step towards an in-line shape compensation method that based on the monitoring of roll load and torque allows for the estimation of shape defects and the subsequent re-adjustment of tooling for compensation. For this the effect of material property variation on common shape defects observed in the roll forming process as well as measurable process parameters such as roll load and torque needs to be understood. The effect of yield strength and material hardening on roll load and torque as well as longitudinal bow is investigated via experimental trials and numerical analysis. A regression analysis combined with Analysis of Variance (ANOVA) techniques is employed to establish the relationships between the process and material parameters and to determine their percentage influence on longitudinal bow, roll load and torque. The study will show that the level of longitudinal bow, one of the major shape defects observed in roll forming, can be estimated by variations in roll load and torque.

[1]  Lars Troive,et al.  Roll forming and the benefits of ultrahigh strength steel , 2008 .

[2]  Michael Lindgren,et al.  Experimental investigations of the roll load and roll torque when high strength steel is roll formed , 2007 .

[3]  Takashi Jimma,et al.  Experiments into the cold roll-forming of straight asymmetrical channels , 1983 .

[4]  J. Larrañaga,et al.  Development and validation of a numerical model for sheet metal roll forming , 2010 .

[5]  Bernard Rolfe,et al.  Multivariate modelling of variability in sheet metal forming , 2008 .

[6]  Peter Groche,et al.  Prediction and inline compensation of springback in roll forming of high and ultra-high strength steels , 2008, Prod. Eng..

[7]  P. D. Smith,et al.  The prediction of roll load in cold roll-forming , 1987 .

[8]  Jon Larrañaga,et al.  Comparison of Bending of Automotive Steels in Roll Forming and in a V-Die , 2012 .

[9]  Jon Larrañaga,et al.  Geometrical accuracy improvement in flexible roll forming lines , 2011 .

[10]  A. Tekkaya,et al.  Sheet Metal Forming Processes and Applications , 2012 .

[11]  Simon Hellborg,et al.  Finite Element Simulation of Roll Forming , 2007 .

[12]  Michael Lindgren.  Experimental and computational investigation of the roll forming process , 2009 .

[13]  Bernard Rolfe,et al.  The effect of forming strategy on the longitudinal bow in roll forming of advanced high strength steel , 2013 .

[14]  Peter Groche,et al.  Experimental and Numerical Determination of Roll Forming Loads , 2014 .

[15]  George Halmos,et al.  Roll Forming Handbook , 2005 .

[16]  Kevin Eugene Dr. Sweeney,et al.  The application of roll forming for automotive structural parts , 2003 .

[17]  H. Moslemi Naeini,et al.  Numerical and Experimental Investigation of Roll Forces and Torques in Cold Roll Forming of a Channel Section , 2011 .

[18]  Buddhika Abeyrathna,et al.  An Experimental Investigation of Edge Strain and Bow in Roll Forming a V-Section , 2013 .

[19]  Konstantinos Salonitis,et al.  Investigation of the effects of main roll-forming process parameters on quality for a V-section profile from AHSS , 2009 .

[20]  Zhengyi Jiang,et al.  Investigation of High Strength Steel for Automotive Roll-Forming Parts , 2011 .

[21]  Buddhika Abeyrathna,et al.  A first step towards in-line shape compensation for roll forming applications , 2013 .

[22]  A. H. van den Boogaard,et al.  Product defect compensation by robust optimization of a cold roll forming process , 2013 .

[23]  Peter Groche,et al.  Verification of Numerical Roll Forming Loads with the Aid of Measurement Equipment , 2014 .

[24]  Z. Marciniak,et al.  The mechanics of sheet metal forming , 1992 .