Kinetics and oxidation mechanism of MoSi2–MoB ceramics in the 600–1200 °C temperature range

[1]  E. Levashov,et al.  Comparative investigation of structure, mechanical properties, and oxidation resistance of Mo-Si-B and Mo-Al-Si-B coatings , 2017 .

[2]  E. Levashov,et al.  Self-propagating high-temperature synthesis of advanced materials and coatings , 2017 .

[3]  E. Shafirovich,et al.  Mechanically activated combustion synthesis of molybdenum borosilicides for ultrahigh-temperature structural applications , 2016 .

[4]  E. Levashov,et al.  Structure and properties of nanocomposite Mo—Si—B—(N) coatings , 2015, Protection of Metals and Physical Chemistry of Surfaces.

[5]  E. Levashov,et al.  The influence of Si concentrations on the oxidation resistance of Mo-Si-B-(N) coatings , 2014, Russian Journal of Non-Ferrous Metals = Izvestiya VUZ. Tsvetnaya Metallurgiya.

[6]  E. Levashov,et al.  Self-propagating high-temperature synthesis of advanced ceramics in the Mo–Si–B system: Kinetics and mechanism of combustion and structure formation , 2014 .

[7]  R. Vafaei,et al.  Improvement of MoSi2 oxidation resistance via boron addition: Fabrication of MoB/MoSi2 composite by mechanical alloying and subsequent reactive sintering , 2014 .

[8]  V. Gritsenko,et al.  Electronic structure of silicon dioxide (a review) , 2014 .

[9]  E. Shafirovich,et al.  Mechanically activated combustion synthesis of molybdenum silicides and borosilicides for ultrahigh-temperature structural applications , 2014 .

[10]  Kunming Pan,et al.  Spark plasma sintering synthesis of intermetallic T2 in the Mo–Si–B system , 2013 .

[11]  Jilin Yu,et al.  Tensile properties of multiphase Mo–Si–B refractory alloys at elevated temperatures , 2012 .

[12]  R. Ritchie,et al.  Mo‐Si‐B Alloys for Ultrahigh‐Temperature Structural Applications , 2004, Advanced materials.

[13]  M. Vilasi,et al.  The oxidation behaviour of uniaxial hot pressed MoSi2 in air from 400 to 1400 °C , 2011 .

[14]  Y. Grin,et al.  Dense Mosi2 produced by reactive flash sintering: Control of Mo/Si agglomerates prepared by high-energy ball milling , 2011 .

[15]  G. H. Borhani,et al.  Structural characterization of MoSi2 synthesized by high-energy mechanical milling followed by annealing heat treatment , 2011 .

[16]  Heng Ji,et al.  Oxidation Behavior of ZrO2 Reinforced MoSi2 Composite Coatings Fabricated by Vacuum Plasma Spraying Technology , 2010 .

[17]  Xiaohong Wang,et al.  Effects of boron addition on the formation of MoSi2 by combustion synthesis mode , 2010 .

[18]  Jianguang Xu,et al.  Synthesis of MoSi2/WSi2 nanocrystalline powder by mechanical-assistant combustion synthesis method , 2010 .

[19]  Sungtae Kim,et al.  Phase stability and structural defects in high-temperature Mo–Si–B alloys , 2008 .

[20]  M. Böning,et al.  Mechanically alloyed Mo–Si–B alloys with a continuous α-Mo matrix and improved mechanical properties , 2008 .

[21]  C. Yeh,et al.  Preparation of MoB and MoB–MoSi2 composites by combustion synthesis in SHS mode , 2007 .

[22]  A. Umarji,et al.  Thermal properties of MoSi2 with minor aluminum substitutions , 2007 .

[23]  Jian-sheng Wu,et al.  Oxidation of stoichiometric poly- and single-crystalline MoSi2 at 773 K , 2006 .

[24]  D. Sciti,et al.  Long-term oxidation behavior and mechanical strength degradation of a pressurelessly sintered ZrB2–MoSi2 ceramic , 2005 .

[25]  J. Svensson,et al.  Oxidation behaviour of a MoSi2-based composite in different atmospheres in the low temperature range (400–550 °C) , 2004 .

[26]  R. Khanna,et al.  Microstructure, mechanical properties and oxidation behavior of a multiphase (Mo,Cr)(Si,Al)2 intermetallic alloy–SiC composite processed by reaction hot pressing , 2004 .

[27]  P. Rogl,et al.  Structural materials: metal–silicon–boron: On the melting behavior of Mo–Si–B alloys , 2002 .

[28]  T. Mitchell,et al.  Solid solution hardening and softening in MoSi2 alloys , 2001 .

[29]  R. N. Wright,et al.  Processing and mechanical properties of a molybdenum silicide with the composition Mo–12Si–8.5B (at.%) , 2001 .

[30]  N. Stoloff.  An overview of powder processing of silicides and their composites , 1999 .

[31]  M. Akinc,et al.  Oxidation Behavior of Boron‐Modified Mo5Si3 at 800°–1300°C , 1996 .

[32]  A. Evans,et al.  High-temperature structural materials , 1996 .

[33]  E. Lavernia,et al.  Processing of molybdenum disilicide , 1994, Journal of Materials Science.

[34]  E. Lavernia.  Review Processing of molybdenum disilicide , 1994 .

[35]  P. Tortorelli,et al.  A study of pest oxidation in polycrystalline MoSi_2 , 1992 .

[36]  Z. A. Munir,et al.  Synthesis of molybdenum silicides by the self-propagating combustion method , 1991, Journal of Materials Science.

[37]  Catherine A. Ploskonka,et al.  Fundamentals of Composites Manufacturing: Materials, Methods, and Applications , 1989 .

[38]  R. Bartlett,et al.  Structure and Chemistry of Oxide Films Thermally Grown on Molybdenum Silicides , 1965 .