Computerized planning of prostate cryosurgery with pullback operation

This study is a part of an ongoing project to develop computerized tools for cryosurgery planning. Prostate cryosurgery is frequently performed as a two-stage process in which the first-stage targets are frozen with the cryoprobes at a greater insertion depth, while the second stage of freezing is performed after some cryoprobes are pulled back to new locations, this process being known as the pullback procedure. This paper proposes a method to generate computationally a preferred cryoprobe layout for the pullback operation, using a previously proposed bubble-packing method for cryosurgery planning. For this purpose, additional constraints are imposed to align packed bubbles along the same insertion path between the different stages, and to vary the number of bubbles at each stage. The method is demonstrated on 3D patient models from four individuals, using cryoprobes with a diameter of 1.5 mm and an active length of 15 mm. Results are verified with bioheat transfer simulations, and compared with the non-pullback operations using cryoprobes with longer (25 mm) active lengths. When compared with results of the non-pullback procedure, results with pullback suggest some improvement in freezing in the apex region of the prostate, with a slight increase in overall freezing damage to surrounding healthy tissues.

[1]  Richard J. Balling,et al.  Collaborative Optimization of Systems Involving Discrete Design at the Discipline Level , 1998 .

[2]  J. Cohen,et al.  Urethral warming catheter for use during cryoablation of the prostate. , 1995, Urology.

[3]  H. H. Penns.  Analysis of tissue and arterial blood temperatures in the resting human forearm , 1948 .

[4]  Kenji Shimada,et al.  Cryosurgery planning using bubble packing in 3D , 2008, Computer methods in biomechanics and biomedical engineering.

[5]  H. H. Pennes.  Analysis of tissue and arterial blood temperatures in the resting human forearm. , 1948, Journal of applied physiology.

[6]  J Y Gillenwater,et al.  Determination of optimal freezing parameters of human prostate cancer in a nude mouse model , 1999, The Prostate.

[7]  Yoed Rabin,et al.  The thermal effect of urethral warming during cryosurgery. , 2002, Cryo letters.

[8]  New Mexico..  for Sandia National Laboratories , 2009 .

[9]  Kenji Shimada,et al.  Towards intra‐operative computerized planning of prostate cryosurgery , 2007, The international journal of medical robotics + computer assisted surgery : MRCAS.

[10]  P A Shaffer,et al.  Federation of American Societies for Experimental Biology , 1938, Nature.

[11]  Kenji Shimada,et al.  An efficient numerical technique for bioheat simulations and its application to computerized cryosurgery planning , 2007, Comput. Methods Programs Biomed..

[12]  A. Belldegrun,et al.  Prostate cryoablation using direct transperineal placement of ultrathin probes through a 17-gauge brachytherapy template-technique and preliminary results. , 2001, Urology.

[13]  Y Rabin,et al.  Numerical solution of the multidimensional freezing problem during cryosurgery. , 1998, Journal of biomechanical engineering.

[14]  Kenji Shimada,et al.  Two-phase computerized planning of cryosurgery using bubble-packing and force-field analogy. , 2006, Journal of biomechanical engineering.

[15]  F. A. Seiler,et al.  Numerical Recipes in C: The Art of Scientific Computing , 1989 .

[16]  A. Gage,et al.  Mechanisms of tissue injury in cryosurgery. , 1998, Cryobiology.

[17]  Kenji Shimada,et al.  Physically-based mesh generation: automated triangulation of surfaces and volumes via bubble packing , 1993 .

[18]  Yoed Rabin.  A general model for the propagation of uncertainty in measurements into heat transfer simulations and its application to cryosurgery. , 2003, Cryobiology.

[19]  Kenji Shimada,et al.  Automatic triangular mesh generation of trimmed parametric surfaces for finite element analysis , 1998, Comput. Aided Geom. Des..

[20]  Yoed Rabin,et al.  Computerized Planning for Multiprobe Cryosurgery using a Force-field Analogy , 2004, Computer methods in biomechanics and biomedical engineering.

[21]  Boris Rubinsky,et al.  Optimization of Multiprobe Cryosurgery , 1992 .

[22]  Kenji Shimada,et al.  High Quality Anisotropic Tetrahedral Mesh Generation Via Ellipsoidal Bubble Packing , 2000, IMR.

[23]  Boris Rubinsky,et al.  Transrectal ultrasound‐guided percutaneous radical cryosurgical ablation of the prostate , 1993, Cancer.

[24]  G. Sandison,et al.  Simultaneous optimization of cryoprobe placement and thermal protocol for cryosurgery. , 2001, Physics in medicine and biology.

[25]  William H. Press,et al.  Numerical Recipes in FORTRAN - The Art of Scientific Computing, 2nd Edition , 1987 .

[26]  R. Baissalov,et al.  A semi-empirical treatment planning model for optimization of multiprobe cryosurgery , 2000, Proceedings of the 22nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (Cat. No.00CH37143).