Engineering fine grains, dislocations and precipitates for enhancing the strength of TiB2-modified CoCrFeMnNi high-entropy alloy using Laser Powder Bed Fusion

[1]  Junkai Zhu,et al.  Laser Powder Bed Fusion of Nano-Tib2 Reinforced Feconicr High-Entropy Alloy with Enhanced Strength and Firm Corrosion Resistance , 2022, SSRN Electronic Journal.

[2]  J. Luan,et al.  Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures , 2022, Acta Materialia.

[3]  Xin Lin,et al.  Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using Laser Powder Bed Fusion: design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms , 2022, Additive Manufacturing.

[4]  Guoqun Zhao,et al.  Microstructure and mechanical properties of Al0.3FeCoCrNi high entropy alloy processed by laser powder bed fusion using FeCoCrNi and Al powder mixture , 2022, Materials Science and Engineering: A.

[5]  Bin Chen,et al.  Structural evolution and mechanical properties of TiB2 reinforced 2024Al composite stimulated by heat treatment , 2022, Materials Science and Engineering: A.

[6]  M. Mansori,et al.  Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite , 2022, Materials Science and Engineering: A.

[7]  Z. Pan,et al.  Effects of inter-layer remelting frequency on the microstructure evolution and mechanical properties of equimolar CoCrFeNiMn high entropy alloys during in-situ powder-bed arc additive manufacturing (PBAAM) process , 2022, Journal of Materials Science & Technology.

[8]  X. Lu,et al.  Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment , 2021, Additive Manufacturing.

[9]  Yunzhi Wang,et al.  In situ design of advanced titanium alloy with concentration modulations by additive manufacturing , 2021, Science.

[10]  D. Wan,et al.  Additive manufacturing of TiB2-containing CoCrFeMnNi high-entropy alloy matrix composites with high density and enhanced mechanical properties , 2021 .

[11]  D. Ponge,et al.  Chemical heterogeneity enhances hydrogen resistance in high-strength steels , 2021, Nature Materials.

[12]  L. Thijs,et al.  Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg , 2021, Scientific Reports.

[13]  Q. Ramasse,et al.  The nucleation sequence of α-Al on TiB2 particles in Al-Cu alloys , 2021 .

[14]  S. Jadhav,et al.  Highly conductive and strong CuSn0.3 alloy processed via laser powder bed fusion starting from a tin-coated copper powder , 2020 .

[15]  Hyoung-Seop Kim,et al.  Unusual strain-induced martensite and absence of conventional grain refinement in twinning induced plasticity high-entropy alloy processed by high-pressure torsion , 2020 .

[16]  Jiesheng Han,et al.  Microstructure, mechanical and tribological properties of CoCrFeNiMn high entropy alloy matrix composites with addition of Cr3C2 , 2020, Tribology International.

[17]  T. Yang,et al.  Cocktail effects in understanding the stability and properties of face-centered-cubic high-entropy alloys at ambient and cryogenic temperatures , 2020 .

[18]  Sangsun Yang,et al.  Superior Temperature-Dependent Mechanical Properties and Deformation Behavior of Equiatomic CoCrFeMnNi High-Entropy Alloy Additively Manufactured by Selective Laser Melting , 2020, Scientific Reports.

[19]  Zan Li,et al.  The origin of high-density dislocations in additively manufactured metals , 2020 .

[20]  L. Thijs,et al.  Increasing the productivity of laser powder bed fusion: Influence of the hull-bulk strategy on part quality, microstructure and mechanical performance of Ti-6Al-4V , 2020 .

[21]  J. Seol,et al.  Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy , 2020 .

[22]  Sangsun Yang,et al.  Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting , 2020, Materials Research Letters.

[23]  Pei Wei,et al.  Additively manufactured fine grained Ni6Cr4WFe9Ti high entropy alloys with high strength and ductility , 2019, Materials Science and Engineering: A.

[24]  F. Xuan,et al.  Fine-structured CoCrFeNiMn high-entropy alloy matrix composite with 12 wt% TiN particle reinforcements via selective laser melting assisted additive manufacturing , 2019, Materials letters (General ed.).

[25]  Hyoung-Seop Kim,et al.  Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering , 2019, Journal of Alloys and Compounds.

[26]  B. S. Murty,et al.  Thermal stability of AlCoFeMnNi high-entropy alloy , 2019, Scripta Materialia.

[27]  B. Murty,et al.  Phase formation and thermal stability of CoCrFeNi and CoCrFeMnNi equiatomic high entropy alloys , 2019, Journal of Alloys and Compounds.

[28]  Weidong Huang,et al.  Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties , 2019, Materials Science and Engineering: A.

[29]  B. Almangour,et al.  Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing , 2019, Composites Part B: Engineering.

[30]  Y. Liu,et al.  Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting , 2018, Materials Characterization.

[31]  Jean-Pierre Kruth,et al.  Microstructure evolution of 316L produced by HP-SLM (high power selective laser melting) , 2018, Additive Manufacturing.

[32]  T. Niendorf,et al.  A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties , 2018 .

[33]  Minh-Son Pham,et al.  Printability and microstructure of the CoCrFeMnNi high-entropy alloy fabricated by laser powder bed fusion , 2018, Materials Letters.

[34]  Yong-Wei Zhang,et al.  Predictive model for porosity in powder-bed fusion additive manufacturing at high beam energy regime , 2018 .

[35]  C. Kenel,et al.  Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting , 2018, Acta Materialia.

[36]  W. M. Rainforth,et al.  Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate , 2018, Acta Materialia.

[37]  T. Yuan,et al.  Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property , 2018 .

[38]  T. Nieh,et al.  Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr)94Ti2Al4 high-entropy alloy , 2018 .

[39]  Min Song,et al.  Microstructures and mechanical properties of C-containing FeCoCrNi high-entropy alloy fabricated by selective laser melting , 2018 .

[40]  Y. H. Wang,et al.  Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure , 2017 .

[41]  N. Tsuji,et al.  The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: Comparison between experiment and calculation results , 2017 .

[42]  Ł. Rogal,et al.  CoCrFeMnNi high entropy alloy matrix nanocomposite with addition of Al2O3 , 2017 .

[43]  Ł. Rogal,et al.  Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy , 2017 .

[44]  Jean-Pierre Kruth,et al.  Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility , 2017 .

[45]  L. Levine,et al.  Homogenization Kinetics of a Nickel-based Superalloy Produced by Powder Bed Fusion Laser Sintering. , 2017, Scripta materialia.

[46]  Y. Chew,et al.  Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM , 2016 .

[47]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[48]  Z. Fu,et al.  Effect of the addition of nano-Al2O3 on the microstructure and mechanical properties of twinned Al0.4FeCrCoNi1.2Ti0.3 alloys , 2016 .

[49]  Yong Liu,et al.  Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion , 2016 .

[50]  Yusheng Shi,et al.  Selective laser melting of carbon/AlSi10Mg composites: Microstructure, mechanical and electronical properties , 2016 .

[51]  Andrew T. Anderson,et al.  Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.

[52]  I. Todd,et al.  The use of high-entropy alloys in additive manufacturing , 2015 .

[53]  Brian Cantor,et al.  Multicomponent and High Entropy Alloys , 2014, Entropy.

[54]  Wei Zhang,et al.  High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase Diagrams , 2014 .

[55]  G. Eggeler,et al.  The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy , 2013 .

[56]  Takeshi Egami,et al.  Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study , 2013, Metallurgical and Materials Transactions A.

[57]  J. Yeh,et al.  Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys , 2013 .

[58]  E. Lavernia,et al.  Strengthening Mechanisms in a High-Strength Bulk Nanostructured Cu-Zn-Al Alloy Processed Via Cryomilling and Spark Plasma Sintering , 2013 .

[59]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[60]  Reinhart Poprawe,et al.  Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium , 2012 .

[61]  D. Miracle,et al.  Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .

[62]  P. Liaw,et al.  Refractory high-entropy alloys , 2010 .

[63]  David N. Miller,et al.  Crystallography of engulfed and pushed TiB2 particles in aluminium , 2007 .

[64]  B. Cantor,et al.  Microstructural development in equiatomic multicomponent alloys , 2004 .

[65]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[66]  Howard J. Stone,et al.  An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy , 2017 .

[67]  G. K. Williamson,et al.  X-ray line broadening from filed aluminium and wolfram , 1953 .