Force sensor based on discrete optoelectronic components and compliant frames

Abstract In this paper, a novel force sensor based on commercial discrete optoelectronic components mounted on a compliant frame is described. The compliant frame has been designed through an optimization procedure to achieve a desired relation between the applied force and the angular displacement of the optical axes of the optoelectronic components. The narrow-angle characteristics of Light Emitting Diode (LED) and PhotoDetector (PD) couples have been exploited for the generation of a signal proportional to very limited deformation of the compliant frame caused by the external traction force. This sensor is suitable for applications in the field of tendon driven robots, and in particular the use of this sensor for the measurement of the actuator side tendon force in a robotic hand is reported. The design procedure of the sensor is presented together with the sensor prototype, the experimental verification of the calibration curve and of the frame deformation and the testing in a force feedback control system. The main advantages of this sensor are the simplified conditioning electronics, the very high noise-to-signal ratio and the immunity to electromagnetic fields.

[1]  Noboru Kikuchi,et al.  Topology optimization of thermally actuated compliant mechanisms considering time-transient effect , 2004 .

[2]  Kazuhito Yokoi,et al.  On a new torque sensor for tendon drive fingers , 1990, IEEE Trans. Robotics Autom..

[3]  Wan Kyun Chung,et al.  Stiffness control of a coupled tendon-driven robot hand , 1994 .

[4]  Yoky Matsuoka,et al.  Muscle actuator design for the ACT Hand , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[5]  G. Vassura,et al.  Design of a Single-Acting Constant-Force Actuator Based on Dielectric Elastomers , 2008 .

[6]  Hong Liu,et al.  A new control strategy for DLR's multisensory articulated hand , 1999 .

[7]  Stephen C. Jacobsen,et al.  The UTAH/M.I.T. Dextrous Hand: Work in Progress , 1984 .

[8]  S. Kasap.  Optoelectronics and Photonics: Principles and Practices , 2001 .

[9]  Jun Nakanishi,et al.  Comparative experiments on task space control with redundancy resolution , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  Ciro Natale,et al.  Interaction Control of Robot Manipulators: Six degrees-of-freedom tasks , 2003 .

[11]  Luigi Villani,et al.  Experiments of impedance control on an industrial robot manipulator with joint friction , 1996, Proceeding of the 1996 IEEE International Conference on Control Applications IEEE International Conference on Control Applications held together with IEEE International Symposium on Intelligent Contro.

[12]  C. Natale,et al.  The twisted string actuation system: Modeling and control , 2010, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[13]  Gianluca Palli,et al.  Integrated Mechatronic Design for a New Generation of Robotic Hands , 2009 .

[14]  S. A. Alghamdi,et al.  Dynamic stiffness matrix and load functions of Timoshenko beam using the transport matrix , 2001 .

[15]  Robert J. Wood,et al.  Towards a 3g crawling robot through the integration of microrobot technologies , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[16]  Carlos Canudas de Wit,et al.  A survey of models, analysis tools and compensation methods for the control of machines with friction , 1994, Autom..

[17]  Tetsuo Iwakuma,et al.  ON DERIVATION OF TIMOSHENKO BEAM STIFFNESS EQUATION , 1981 .

[18]  Hong Liu,et al.  DLR-Hand II: next generation of a dextrous robot hand , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[19]  Hong Liu,et al.  The HIT/DLR dexterous hand: work in progress , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[20]  Ciro Natale,et al.  Minimally invasive torque sensor for tendon-driven robotic hands , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[21]  Gianluca Palli,et al.  Development of UB Hand 3: Early Results , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[22]  Inhyuk Moon,et al.  Design of robotic hand with tendon-driven three fingers , 2007, 2007 International Conference on Control, Automation and Systems.

[23]  Silvestro Micera,et al.  On the development of a novel adaptive prosthetic hand with compliant joints: experimental platform and EMG control , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[24]  Young-Bae Kim,et al.  International Conference on Control, Automation and Systems , 2007 .

[25]  J. Kenneth Salisbury,et al.  Articulated Hands , 1982 .

[26]  Gih-Keong Lau,et al.  Topological optimization of mechanical amplifiers for piezoelectric actuators under dynamic motion , 2000 .

[27]  Nicolae Lobontiu,et al.  Corner-Filleted Flexure Hinges , 2001 .

[28]  Gianluca Palli,et al.  Design and modeling of variable stiffness joints based on compliant flexures , 2010 .