Development of a Fully Integrated Acid Fracture Model

[1]  B. R. Meyer.  Design Formulae for 2-D and 3-D Vertical Hydraulic Fractures: Model Comparison and Parametric Studies , 1986 .

[2]  Antonin Settari.  Modeling of Acid-Fracturing Treatments , 1993 .

[3]  M. P. Cleary,et al.  Development of a Fully Three-Dimensional Simulator for Analysis and Design of Hydraulic Fracturing , 1983 .

[4]  J. Geertsma,et al.  A Rapid Method of Predicting Width and Extent of Hydraulically Induced Fractures , 1969 .

[5]  L. R. Raymond,et al.  Productivity of wells in vertically fractured, damaged formations , 1967 .

[6]  Ahmed H. El-Banbi,et al.  Production Analysis of Linear Flow Into Fractured Tight Gas Wells , 1998 .

[7]  Robert S. Schechter.  Oil Well Stimulation , 1991 .

[8]  W. J. McGuire,et al.  The Effect of Vertical Fractures on Well Productivity , 1960 .

[9]  Henry J. Ramey.  Pressure transient testing , 1982 .

[10]  Jianchun Guo,et al.  Effects of acid–rock reaction heat on fluid temperature profile in fracture during acid fracturing in carbonate reservoirs , 2014 .

[11]  John de Rozieres.  Measuring Diffusion Coefficients in Acid Fracturing Fluids and Their Application to Gelled and Emulsified Acids , 1994 .

[12]  G. R. Dysart,et al.  The Effect of Temperature On Stimulation Design , 1969 .

[13]  K. G. Nolte,et al.  A General Analysis of Fracturing Pressure Decline With Application to Three Models , 1986 .

[14]  H. A. Wahl,et al.  Stress-Intensity Factor and Fracture Cross-Sectional Shape Predictions From a Three-Dimensional Model for Hydraulically Induced Fractures , 1988 .

[15]  R. M. Terrill.  HEAT TRANSFER IN LAMINAR FLOW BETWEEN PARALLEL POROUS PLATES , 1965 .

[16]  J. Guin,et al.  A New Method for Predicting Acid Penetration Distance , 1975 .

[17]  J. Dodds,et al.  Laminar flow in channels with porous walls , 1989 .

[18]  C. Ehlig-Economides,et al.  Petroleum production systems , 1993 .

[19]  H. J. Ramey.  Wellbore Heat Transmission , 1962 .