Characterization and assessment of cool coloured solar protection devices for Mediterranean residential buildings application

Abstract Cooling down buildings and cities is becoming a priority as a consequence of global increase of air temperatures. This effect determines the growing of energy consumption for cooling, as well as the spread of urban heat island effect. Cool materials are characterised by high solar reflectance and high infrared emissivity. These two properties allow the material to stay cool under the solar radiation. Cool materials are deserving attention to mitigate surface temperatures in buildings and urban materials. This paper presents the first results of the potential benefits of cool materials applied on solar protection devices. Shutters are used for security and for solar shading in Mediterranean countries. These components are generally characterised by high solar absorbance, due to the colours traditionally used. An experimental campaign was carried out to measure and compare the optical and thermal properties of conventional and cool coloured materials. The results were used as input to assess the impact of these products in Italian dwelling, taking into account several variables: climatic zone, insulation level, and operative conditions. The cooling energy demand and the thermal comfort conditions were calculated with an hourly heat balance building simulation tool.

[1]  Sharifah Fairuz Syed Fadzil,et al.  The Potential of Shading Devices for Temperature Reduction in High-Rise Residential Buildings in the Tropics , 2011 .

[2]  C. Rosenzweig,et al.  Characterizing the urban heat island in current and future climates in New Jersey , 2005 .

[3]  Ronnen Levinson,et al.  A novel technique for the production of cool colored concrete tile and asphalt shingle roofing products , 2009 .

[4]  André De Herde,et al.  The most efficient position of shading devices in a double-skin facade , 2007 .

[5]  Hashem Akbari,et al.  Peak power and cooling energy savings of high-albedo roofs , 1997 .

[6]  H. Akbari,et al.  Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions , 2007 .

[7]  H. Akbari,et al.  The effect of a cool-coating on the thermal effectiveness of exposed exterior ducts , 2007 .

[8]  Christina Diakaki,et al.  Numerical and experimental analysis of cool roofs application on a laboratory building in Iraklion, Crete, Greece , 2012 .

[9]  H. Akbari,et al.  Solar spectral optical properties of pigments. Part I: model for deriving scattering and absorption coefficients from transmittance and reflectance measurements , 2005 .

[10]  Dehua Zhao,et al.  A fieldwork study on the diurnal changes of urban microclimate in four types of ground cover and urban heat island of Nanjing, China , 2008 .

[11]  Hans Simmler,et al.  Experimental and numerical determination of the total solar energy transmittance of glazing with venetian blind shading , 2008 .

[12]  M Zinzi,et al.  CATRAM: An Apparatus for the Optical Characterization of Advanced Transparent Materials. , 1998, Applied optics.

[13]  Maria Kolokotroni,et al.  Cool roof technology in London: An experimental and modelling study , 2013 .

[14]  Adnan Shariah,et al.  Effects of absorptance of external surfaces on heating and cooling loads of residential buildings in Jordan , 1998 .

[15]  F. Kuznik,et al.  Experimental study of a mechanically ventilated double-skin façade with venetian sun-shading device: A full-scale investigation in controlled environment , 2010 .

[16]  Emmanuel Bozonnet,et al.  Cool roofs impact on building thermal response: A French case study , 2010 .

[17]  M. F. El-Refaie.  Performance analysis of external shading devices , 1987 .

[18]  L. Gu,et al.  Measured and simulated performance of reflective roofing systems in residential buildings , 1998 .

[19]  Maria Kolokotroni,et al.  THE EFFECT OF THE LONDON URBAN HEAT ISLAND ON BUILDING SUMMER COOLING DEMAND AND NIGHT VENTILATION STRATEGIES , 2006 .

[20]  N. Klitsikas,et al.  The effect of the Athens heat island on air conditioning load , 2000 .

[21]  H. Akbari,et al.  Solar spectral optical properties of pigments—Part II: survey of common colorants , 2004 .

[22]  M. Zinzi.  Optical properties and influence of reflective coatings on the energy demand and thermal comfort in dwellings at Mediterranean latitudes , 2008 .

[23]  Geoffrey Van Moeseke,et al.  Impact of control rules on the efficiency of shading devices and free cooling for office buildings , 2007 .

[24]  M. Santamouris,et al.  Heat Island Research in Europe: The State of the Art , 2007 .

[25]  Craig P. Wray,et al.  The effects of roof reflectance on air temperatures surrounding a rooftop condensing unit , 2008 .

[26]  C. Romeo,et al.  Impact of a cool roof application on the energy and comfort performance in an existing non-residential building. A Sicilian case study , 2013 .

[27]  Y. Goldreich.  Ground and top of canopy layer urban heat island partitioning on an airborne image , 2006 .

[28]  M. Santamouris,et al.  On the development, optical properties and thermal performance of cool colored coatings for the urban environment , 2007 .

[29]  J. Mardaljevic.  Spatio-temporal dynamics of solar shading for a parametrically defined roof system , 2004 .

[30]  Fabio Bisegna,et al.  Daylighting with external shading devices: design and simulation algorithms , 2006 .