Moisture-induced interfacial delamination growth in plastic IC packages during solder reflow

Very small defects may exist at interfaces in IC packages due to random factors, manufacturing faults or contamination. During solder reflow, these defects give rise to stress concentrations due to thermal mismatch between the materials forming the interface and to the development of hygrostresses from moisture absorption in the plastic encapsulant. In this paper, the mechanics of interfacial delamination will be discussed and a methodology presented for analysing moisture-induced delamination growth during solder reflow. This paper also describes an experimental study which verified the methodology. In this experimental study, plastic packages which were fabricated with a known internal delamination, were divided into 3 groups and subjected to 3 different levels of moisture preconditioning, namely fully dry, 85/spl deg/C/60%RH and 85/spl deg/C/85%RH. Packages from each group were then subjected to oven temperatures varying from 180/spl deg/C to 230/spl deg/C in increments of 5/spl deg/C. Examining the specimens using a scanning acoustic microscope, the temperature at which delamination propagation occurred was determined and compared with that predicted using mixed-mode interfacial delamination mechanics. Generally good agreement was obtained. The growth of the delamination could be explained in terms of the variation of hygrothermal stress intensity factor and interface toughness with crack length.

[1]  T. Hattori,et al.  A Stress Singularity Parameter Approach for Evaluating the Interfacial Reliability of Plastic Encapsulated LSI Devices , 1989 .

[2]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[3]  Sheng Liu,et al.  Bimaterial interfacial crack growth as a function of mode-mixity , 1995 .

[4]  Ryoji Yuuki,et al.  Efficient Boundary Element Analysis of Stress Intensity Factors for Interface Cracks in Dissimilar Materials , 1991 .

[5]  A. Tay,et al.  A criterion for predicting delamination in plastic IC packages , 1993, 31st Annual Proceedings Reliability Physics 1993.

[6]  A. Nishimura,et al.  Measurement of IC Molding Compound Adhesion Strength and Prediction of Interface Delamination Within Package. , 1994 .

[7]  R. Lin,et al.  Moisture induced package cracking in plastic encapsulated surface mount components during solder reflow process , 1988, 26th Annual Proceedings Reliability Physics Symposium 1988.

[8]  R. Salganik,et al.  The strength of adhesive joints using the theory of cracks , 1965 .

[9]  Andrew A. O. Tay,et al.  Influence of temperature, humidity and defect location on delamination in plastic IC packages , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[10]  C. Shih.  Cracks on bimaterial interfaces: elasticity and plasticity aspects , 1991 .

[11]  A. Nishimura,et al.  Analysis of package cracking during reflow soldering process , 1988, 26th Annual Proceedings Reliability Physics Symposium 1988.

[12]  Andrew A. O. Tay,et al.  Predicting delamination in plastic IC packages and determining suitable mold compound properties , 1994 .

[13]  Andrew A. O. Tay,et al.  Effects of moisture and delamination on cracking of plastic IC packages during solder reflow , 1996, 1996 Proceedings 46th Electronic Components and Technology Conference.

[14]  I. Fukuzawa,et al.  Moisture Resistance Degradation of Plastic LSIs by Reflow Soldering , 1985, 23rd International Reliability Physics Symposium.

[15]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[16]  Kenneth M. Liechti,et al.  Biaxial Loading Experiments for Determining Interfacial Fracture Toughness , 1991 .

[17]  Tingyu Lin,et al.  Moisture diffusion and heat transfer in plastic IC packages , 1996 .