Premature Wear and Recurring Bearing Failures in an Inverter-Driven Induction Motor—Part I: Investigation of the Problem

This paper provides an analysis about early incipient and recurring failures in three-phase induction motor bearings when driven by pulsewidth modulation (PWM) inverters, focusing on a real industrial process. The potential problems preliminarily defined were first discussed on a theoretical basis and afterward experimentally assessed by means of vibration, stator current, and common-mode current data acquisition and analysis. Over the investigation, it was concluded that the presence of common-mode currents at the verified levels could cause damages to the motor bearings, which was confirmed when the machine stopped working due to another bearing failure.

[1]  G. B. Kliman,et al.  Noninvasive detection of broken rotor bars in operating induction motors , 1988 .

[2]  Kristine Bonnevie.  Failure Identification and Analysis for High Voltage Induction Motors in Petrochemical Industry , 1998 .

[3]  H. Henao,et al.  A frequency-domain detection of stator winding faults in induction machines using an external flux sensor , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[4]  S. M. A. Cruz, A. J. Marques Cardoso.  Rotor Cage Fault Diagnosis in Three-Phase Induction Motors by Extended Park's Vector Approach , 2000 .

[5]  Andreas Binder,et al.  High-Frequency Induction Machine Modeling for Common Mode Current and Bearing Voltage Calculation , 2014, IEEE Transactions on Industry Applications.

[6]  L.A.L. de Almeida,et al.  Improving the signal data acquisition in condition monitoring of electrical machines , 2003, Proceedings of the 20th IEEE Instrumentation Technology Conference (Cat. No.03CH37412).

[7]  A. Muetze,et al.  Don't lose your bearings , 2006, IEEE Industry Applications Magazine.

[8]  Alberto Bellini,et al.  Diagnosis of Bearing Faults in Induction Machines by Vibration or Current Signals: A Critical Comparison , 2008, IEEE Transactions on Industry Applications.

[9]  T.G. Habetler,et al.  Motor bearing damage detection using stator current monitoring , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[10]  A. Muetze,et al.  Influence of Motor Operating Parameters on Discharge Bearing Current Activity , 2010, IEEE Transactions on Industry Applications.

[11]  Antonio J. Marques Cardoso,et al.  Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's Vector approach , 1997 .

[12]  Fabiano Fragoso Costa,et al.  Improving the signal data acquisition in condition monitoring of electrical machines , 2004, IEEE Transactions on Instrumentation and Measurement.

[13]  A. J. Marques Cardoso,et al.  Rotor Cage Fault Diagnosis in Three-Phase Induction Motors by Extended Park's Vector Approach , 2000 .

[14]  Cleber Gustavo Dias.  Proposta de um novo método para a detecção de barras rompidas em motores de indução com rotor em gaiola. , 2006 .

[15]  Doyle F. Busse,et al.  The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1997 .

[16]  Arlindo Mertens Junior.  Uma abordagem sobre detecçăo de barras quebradas em motores de induçăo , 2008 .

[17]  A. Wallace,et al.  An evaluation of mitigation techniques for bearing currents, EMI and over-voltages in ASD applications , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[18]  S. A. Volokhov,et al.  Method for detection of broken bars in induction motors , 2000 .

[19]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[20]  R. R. Obaid,et al.  Stator current analysis for bearing damage detection in induction motors , 2003, 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003..

[21]  A.J.M. Cardoso,et al.  Bearing failures diagnosis in three-phase induction motors by extended Park's vector approach , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..