A Resilient, Untethered Soft Robot

A pneumatically powered, fully untethered mobile soft robot is described. Composites consisting of silicone elastomer, polyaramid fabric, and hollow glass microspheres were used to fabricate a sufficiently large soft robot to carry the miniature air compressors, battery, valves, and controller needed for autonomous operation. Fabrication techniques were developed to mold a 0.65-meter-long soft body with modified Pneu-Net actuators capable of operating at the elevated pressures (up to 138kPa) required to actuate the legs of the robot and hold payloads of up to 8kg. The soft robot is safe to interact with during operation, and its silicone body is innately resilient to a variety of adverse environmental conditions including snow, puddles of water, direct (albeit limited) exposure to flames, and the crushing force of being run over by an automobile.

[1]  Ian D. Walker,et al.  Soft robotics: Biological inspiration, state of the art, and future research , 2008 .

[2]  MajidiCarmel,et al.  Soft Robotics: A Perspective—Current Trends and Prospects for the Future , 2014 .

[3]  Jamie L. Branch,et al.  Robotic Tentacles with Three‐Dimensional Mobility Based on Flexible Elastomers , 2013, Advanced materials.

[4]  R. Wood,et al.  A non-differential elastomer curvature sensor for softer-than-skin electronics , 2011 .

[5]  Filip Ilievski,et al.  Multigait soft robot , 2011, Proceedings of the National Academy of Sciences.

[6]  Daniela Rus,et al.  Autonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators. , 2014, Soft robotics.

[7]  Robert J. Wood,et al.  Soft wearable motion sensing suit for lower limb biomechanics measurements , 2013, 2013 IEEE International Conference on Robotics and Automation.

[8]  Cagdas D. Onal,et al.  Design and control of a soft and continuously deformable 2D robotic manipulation system , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[9]  Robert J. Wood,et al.  Simple passive valves for addressable pneumatic actuation , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[10]  Daniela Rus,et al.  Autonomous undulatory serpentine locomotion utilizing body dynamics of a fluidic soft robot , 2013, Bioinspiration & biomimetics.

[11]  D. Oldfield,et al.  Long term natural ageing of silicone elastomers , 1996 .

[12]  George M. Whitesides,et al.  Titelbild: Soft Robotics for Chemists (Angew. Chem. 8/2011) , 2011 .

[13]  Cecilia Laschi,et al.  Soft robotics: a bioinspired evolution in robotics. , 2013, Trends in biotechnology.

[14]  Charles Kim,et al.  Design of soft robotic actuators using fluid-filled fiber-reinforced elastomeric enclosures in parallel combinations , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[15]  Shoichi Iikura,et al.  Development of flexible microactuator and its applications to robotic mechanisms , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[16]  G. Whitesides,et al.  Pneumatic Networks for Soft Robotics that Actuate Rapidly , 2014 .

[17]  Fu-Yu Hshieh,et al.  Shielding effects of silica-ash layer on the combustion of silicones and their possible applications on the fire retardancy of organic polymers , 1998 .

[18]  C. Majidi Soft Robotics: A Perspective—Current Trends and Prospects for the Future , 2014 .

[19]  LipsonHod,et al.  Challenges and Opportunities for Design, Simulation, and Fabrication of Soft Robots , 2014 .

[20]  Robert J. Wood,et al.  Influence of surface traction on soft robot undulation , 2013, Int. J. Robotics Res..

[21]  Claire Longuet,et al.  Flame retardancy of silicone-based materials , 2009 .

[22]  Stephen A. Morin,et al.  Using explosions to power a soft robot. , 2013, Angewandte Chemie.

[23]  Daniel M. Vogt,et al.  Design and Characterization of a Soft Multi-Axis Force Sensor Using Embedded Microfluidic Channels , 2013, IEEE Sensors Journal.

[24]  Cheng-Liang Chang,et al.  Nucleophilic Cleavage of Crosslinked Polysiloxanes to Cyclic Siloxane Monomers: Mild Catalysis by a Designed Polar Solvent System , 2005 .

[25]  Robert J. Wood,et al.  Mechanically programmable bend radius for fiber-reinforced soft actuators , 2013, 2013 16th International Conference on Advanced Robotics (ICAR).

[26]  Yong-Lae Park,et al.  Design and Fabrication of Soft Artificial Skin Using Embedded Microchannels and Liquid Conductors , 2012, IEEE Sensors Journal.

[27]  Sung-Hoon Ahn,et al.  Review of manufacturing processes for soft biomimetic robots , 2009 .

[28]  Fumiya Iida,et al.  The challenges ahead for bio-inspired 'soft' robotics , 2012, CACM.

[29]  Filip Ilievski,et al.  Soft robotics for chemists. , 2011, Angewandte Chemie.

[30]  George M. Whitesides,et al.  A Hybrid Combining Hard and Soft Robots , 2014 .

[31]  Xin Chen,et al.  Soft Mobile Robots with On-Board Chemical Pressure Generation , 2011, ISRR.

[32]  Thomas J McCarthy,et al.  Rediscovering silicones: molecularly smooth, low surface energy, unfilled, UV/vis-transparent, extremely cross-linked, thermally stable, hard, elastic PDMS. , 2010, Langmuir : the ACS journal of surfaces and colloids.