Production and Characterization of Oxides Formed on Grade 300 and 350 Maraging Steels Using two Oxygen/Steam Rich Atmospheres

[1]  E. Vilarrasa-García,et al.  Characterization Study of an Oxide Film Layer Produced under CO2/Steam Atmospheres on Two Different Maraging Steel Grades , 2021 .

[2]  W. S. Araújo,et al.  Microstructural characterization of grade 300 and grade 350 maraging steels and electrochemical study in hydrofluoric solution , 2021 .

[3]  M. Rahmani,et al.  Synthesis and optimum temperature determination of highly sensitive MoO3-based heterojunction Schottky sensor for hydrogen detection , 2021 .

[4]  K. L. Routray,et al.  Nanosized CoFe2O4-graphene nanoplatelets with massive dielectric enhancement for high frequency device application , 2020 .

[5]  H. Fan,et al.  Simple electrodeposition of MoO3 film on carbon cloth for high-performance aqueous symmetric supercapacitors , 2020 .

[6]  Miguel Ángel Martínez,et al.  Improving Mechanical Properties of Glass Fiber Reinforced Polymers through Silica-Based Surface Nanoengineering , 2020 .

[7]  Z. Lei,et al.  Incorporation of electroactive NiCo2S4 and Fe2O3 into graphene aerogel for high-energy asymmetric supercapacitor , 2020 .

[8]  Haozhe Liu,et al.  Morphology-controllable synthesis of NiFe2O4 growing on graphene nanosheets as advanced electrode material for high performance supercapacitors , 2020, Journal of Alloys and Compounds.

[9]  H. Abreu,et al.  EBSD study of early fractured phenomena in a 350 grade Maraging steel elbows exposed to hydrofluoric acid , 2019, Engineering Failure Analysis.

[10]  M. Abdelmoula,et al.  Starch functionalized magnetite nanoparticles: New insight into the structural and magnetic properties , 2019, Journal of Solid State Chemistry.

[11]  H. Abreu,et al.  The effect of prior austenite grain size on hydrogen embrittlement of Co-containing 18Ni 300 maraging steel , 2019, International Journal of Hydrogen Energy.

[12]  K. Koski,et al.  Chemically Tuning Quantized Acoustic Phonons in 2D Layered MoO3 Nanoribbons. , 2019, Nano letters.

[13]  A. Jardini,et al.  Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel , 2019, Materials Science and Engineering: A.

[14]  X. Xiao,et al.  Creating oxygen-vacancies in MoO3- nanobelts toward high volumetric energy-density asymmetric supercapacitors with long lifespan , 2019, Nano Energy.

[15]  C. Cicutti,et al.  Analysis of titanium nitrides precipitated during medium carbon steels solidification , 2018, Journal of Materials Research and Technology.

[16]  Manfred Martin,et al.  Synthesis and microstructure of the (Co,Cr,Fe,Mn,Ni) 3 O 4 high entropy oxide characterized by spinel structure , 2018 .

[17]  P. Yuan,et al.  XRD-based quantitative analysis of clay minerals using reference intensity ratios, mineral intensity factors, Rietveld, and full pattern summation methods: A critical review , 2018 .

[18]  H. Abreu,et al.  Influence of Solution Annealing on Microstructure and Mechanical Properties of Maraging 300 Steel , 2016 .

[19]  H. Freund,et al.  Phase transformations in thin iron oxide films: Spectromicroscopic study of velocity and shape of the reaction fronts☆ , 2016 .

[20]  Zhimao Yang,et al.  Kinetics and Intermediate Phases in Epitaxial Growth of Fe3O4 Films from Deposition and Thermal Reduction , 2016, 1605.00181.

[21]  M. Oujja,et al.  Self-organized single crystal mixed magnetite/cobalt ferrite films grown by infrared pulsed-laser deposition , 2015 .

[22]  M. Béreš,et al.  Hydrogen embrittlement of ultra high strength 300 grade maraging steel , 2015 .

[23]  P. Blaha,et al.  Adsorption and incorporation of transition metals at the magnetite Fe3O4(001) surface , 2015 .

[24]  E. Brosh,et al.  Addressing the issue of precipitates in maraging steels – Unambiguous answer , 2015 .

[25]  Wei Wang,et al.  Microstructure and magnetic properties of MFe2O4 (M = Co, Ni, and Mn) ferrite nanocrystals prepared using colloid mill and hydrothermal method , 2015 .

[26]  J. H. Araújo,et al.  Nanoferrites of nickel doped with cobalt: Influence of Co2+ on the structural and magnetic properties , 2015 .

[27]  H. Freund,et al.  Interconversion of α-Fe2O3 and Fe3O4 Thin Films: Mechanisms, Morphology, and Evidence for Unexpected Substrate Participation , 2014 .

[28]  J. Otubo,et al.  Microstructural Analysis of Co-Free Maraging Steel Aged , 2014 .

[29]  D. K. Kim,et al.  High capacity and low cost spinel Fe3O4 for the Na-ion battery negative electrode materials , 2014 .

[30]  Charles Carson Heat Treating of Maraging Steels , 2014 .

[31]  H. Abreu,et al.  The variant selection in the transformation from austenite to martensite in samples of maraging-350 steel , 2013 .

[32]  Sanket A. Deshmukh,et al.  Atomistic Insights into Early Stage Oxidation and Nanoscale Oxide Growth on Fe(100), Fe(111) and Fe(110) Surfaces , 2013 .

[33]  A. V. van Duin,et al.  Nanoscale oxidation and complex oxide growth on single crystal iron surfaces and external electric field effects. , 2013, Physical chemistry chemical physics : PCCP.

[34]  Z. Shen,et al.  Oxidation behavior of Kovar alloy in controlled atmosphere , 2008 .

[35]  Alexander Glaser,et al.  Characteristics of the Gas Centrifuge for Uranium Enrichment and Their Relevance for Nuclear Weapon Proliferation , 2008 .

[36]  C. C. Silva,et al.  Microstructural characterization of the HAZ in AISI 444 ferritic stainless steel welds , 2008 .

[37]  D. Faria,et al.  Heated goethite and natural hematite: Can Raman spectroscopy be used to differentiate them? , 2007 .

[38]  M. Pardavi-Horvath,et al.  Microwave applications of soft ferrites , 2000 .

[39]  S. Sasaki,et al.  Cation Distributions in Nickel Ferrites , 1997 .

[40]  K. J. Stout,et al.  Comprehensive study of parameters for characterising three-dimensional surface topography: IV: Parameters for characterising spatial and hybrid properties , 1994 .

[41]  K. J. Stout,et al.  Comprehensive study of parameters for characterising three- dimensional surface topography: III: Parameters for characterising amplitude and some functional properties , 1994 .

[42]  U. Viswanathan,et al.  Precipitation hardening in 350 grade maraging steel , 1993, Metallurgical and Materials Transactions A.

[43]  G. D. Smith,et al.  Phase chemistry and precipitation reactions in maraging steels: Part IV. Discussion and conclusions , 1993, Metallurgical and Materials Transactions A.

[44]  C. M. Wayman,et al.  Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels , 1990 .

[45]  C. Greyling,et al.  The kinetics of oxide film growth on Maraging steel as described by space‐charge effects , 1990 .

[46]  J. Sharon,et al.  The mechanism of oxidation of Fe-Ni-Co alloys; The role of Ti and Mo , 1983 .

[47]  J. Sharon,et al.  The oxidation mechanism of Fe-Ni-Co alloys , 1981 .

[48]  P. Heuer,et al.  Environmental Cracking of High Strength Maraging Steels: Part 2—Gaseous Fluoride Atmospheres , 1981 .

[49]  J. Sharon,et al.  A mechanism of oxidation of ferrous aloys by super-heated steam , 1981 .

[50]  F. Chung,et al.  Quantitative interpretation of X-ray diffraction patterns of mixtures. I. Matrix-flushing method for quantitative multicomponent analysis , 1974 .

[51]  D. Kalish,et al.  The strength and fracture toughness of 18 Ni (350) maraging steel , 1971 .

[52]  P. Almodóvar,et al.  Synthesis, characterization and electrochemical assessment of hexagonal molybdenum trioxide (h-MoO3) micro-composites with graphite, graphene and graphene oxide for lithium ion batteries , 2021 .

[53]  S. Tse,et al.  Flame synthesis of gamma-iron-oxide (γ-Fe2O3) nanocrystal films and carbon nanotubes on stainless-steel substrates , 2019, Proceedings of the Combustion Institute.

[54]  F. Marro,et al.  Hydrofluoric acid etching of dental zirconia. Part 1: etching mechanism and surface characterization , 2016 .

[55]  J. Rezek,et al.  Structure and corrosion resistance of oxides grown on maraging steel in steam at elevated temperatures , 1997 .

[56]  P. Surman The oxidation of iron at controlled oxygen partial pressures—I. Hydrogen/water vapour , 1973 .