Structural health monitoring of bridges using acoustic emission technology

Bridges are important part of society's infrastructure and reliable methods are necessary to monitor them and ensure their safety and efficiency. Bridges deteriorate with age and early detection of damage helps in prolonging the lives and prevent catastrophic failures. Most bridges still in used today were built decades ago and are now subjected to changes in load patterns, which can cause localized distress and if not corrected can result in bridge failure. In the past, monitoring of structures was usually done by means of visual inspection and tapping of the structures using a small hammer. Recent advancements of sensors and information technologies have resulted in new ways of monitoring the performance of structures. This paper briefly describes the current technologies used in bridge structures condition monitoring with its prime focus in the application of acoustic emission (AE) technology in the monitoring of bridge structures and its challenges.

[1]  Robert J. Peterman,et al.  Acoustic Emission Monitoring and Analysis of Glass Fiber-Reinforced Composites Bridge Decks , 2005 .

[2]  Alison B. Flatau,et al.  Review Paper: Health Monitoring of Civil Infrastructure , 2003 .

[3]  Masayasu Ohtsu,et al.  The history and development of acoustic emission in concrete engineering , 1996 .

[4]  Karen Margaret Holford,et al.  Acoustic emission testing of bridges , 2005 .

[5]  Arup K. Maji,et al.  Acoustic Emission Source Location Using Lamb Wave Modes , 1997 .

[6]  Nicholas J. Carino,et al.  Health monitoring of civil infrastructures , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  M. Forde,et al.  AE energy analysis on concrete bridge beams , 2005 .

[8]  A. Tobias,et al.  Acoustic-emission source location in two dimensions by an array of three sensors , 1976 .

[9]  S. Quek,et al.  Comparison of Hilbert- Huang, Wavelet, and Fourier Transforms for Selected Applications , 2005 .

[10]  Kevin L. Rens,et al.  Review of nondestructive evaluation techniques of civil infrastructure , 1999 .

[11]  Martine Wevers,et al.  Modal analysis of acoustic emission signals from CFRP laminates , 1999 .

[12]  Christian U. Grosse,et al.  Improvements of AE technique using wavelet algorithms, coherence functions and automatic data analysis , 2003 .

[13]  Adrienn. Tomor,et al.  Application of acoustic emission for masonry arch bridges , 2006 .

[14]  Masayasu Ohtsu,et al.  Detection and evaluation of failures in high-strength tendon of prestressed concrete bridges by acoustic emission , 2007 .

[15]  David T. Schaafsma,et al.  Continuous health monitoring of Graphite Epoxy Motorcases (GEM) , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  Hoon Sohn,et al.  A review of structural health monitoring literature 1996-2001 , 2002 .

[17]  Kanji Ono,et al.  DIAGNOSTICS OF REINFORCED CONCRETE BRIDGES BY ACOUSTIC EMISSION , 2002 .

[18]  Karen Margaret Holford,et al.  Delta T source location for acoustic emission , 2007 .

[19]  Gongkang Fu,et al.  Inspection and monitoring techniques for bridges and civil structures , 2005 .

[20]  Steven D. Glaser,et al.  Wireless Acoustic Emission Sensor Networks for Structural Health Monitoring in Civil Engineering , 2006 .

[21]  Farhad Ansari,et al.  Practical Implementation of Optical Fiber Sensors in Civil Structural Health Monitoring , 2007 .

[22]  John Alexander Steel,et al.  Source location of acoustic emission in diesel engines , 2007 .

[23]  G G Clemena,et al.  Analysis of Acoustic Emissions from a Steel Bridge Hanger , 1998 .

[24]  Peter C. Chang,et al.  Recent Research in Nondestructive Evaluation of Civil Infrastructures , 2003 .

[25]  Jinping Ou,et al.  Health diagnosis of arch bridge suspender by acoustic emission technique , 2007, Fundamental Problems of Optoelectronics and Microelectronics.

[26]  R. Pullin,et al.  Damage Location in Steel Bridges by Acoustic Emission , 2001 .

[27]  Piervincenzo Rizzo,et al.  Acoustic emission monitoring of carbon-fiber-reinforced-polymer bridge stay cables in large-scale testing , 2001 .

[28]  A. J. Batchelor,et al.  Acoustic emission to assess and monitor the integrity of bridges , 2001 .