论文信息 - Investigation Stress of A Lifting Hook with Different Methods: A Review

Investigation Stress of A Lifting Hook with Different Methods: A Review

Stress analysis plays a significant role in the design of parts and structures that must carry load [1]. In this study, Crane hook which is one of lifting equipment, frequently used in material handling is investigated. Analytical (Straight beam, curved beam & Winkler-Bach approximation), experimental (Photo-Elasticity) and numerical (FEM) methods were used by various researchers to study stress pattern of crane hook in its loaded condition. The review of earlier publications allow to conclude that components with complex geometry as crane hooks need a more extensive investigation since a very few articles in the field have been published so far.

Yogesh Tripathi

[1] Yu Huali,et al. Structure-strength of Hook with Ultimate Load by Finite Element Method , 2009 .

[2] J. Domínguez,et al. Brittle fracture of a crane hook , 2010 .

[3] E. Narvydas,et al. CIRCUMFERENTIAL STRESS CONCENTRATION FACTORS AT THE ASYMMETRIC SHALLOW NOTCHES OF THE LIFTING HOOKS OF TRAPEZOIDAL CROSS-SECTION , 2012 .

[4] Brian McDonald,et al. Big blue goes down. The Miller Park crane accident , 2007 .

[5] Shamsuddin Sulaiman,et al. An Approach to Determine Effect of Crane Hook on Payload Sway. , 2012 .

[6] R. Cook,et al. Advanced Mechanics of Materials , 1985 .

[8] Takuma Nishimura,et al. Damage Factor Estimation of Crane-Hook (A Database Approach with Image, Knowledge and Simulation) , 2010 .

[9] Rashmi Uddanwadiker,et al. Stress Analysis of Crane Hook and Validation by Photo-Elasticity , 2011 .

[10] W. Ko. Stress Analysis of B-52 Pylon Hooks for Carrying the X-31 Drop Test Vehicle , 1997 .