Probability Constrained Optimization as a Tool for Functional Design for Six Sigma

ABSTRACT An important up-stream activity in the overall design of a system is the so-called functional design wherein the means and tolerances of the design variables are determined with respect to the competing demands of quality and cost. In this article probability constrained optimization is invoked to produce a functional design that focuses on the goal of design for Six Sigma (i.e., improved customer satisfaction, robustness, and predictable cost levels). Herein, a maximum system probability of nonconformance is obtained from a prescribed defect rate that in turn provides the primary design constraint. The production cost provides the objective function to be minimized in order to allocate the design parameters. All three quality metrics (e.g., target/larger/smaller-is-best) and robustness are inherent in the approach. The design of an electro-mechanical servo system serves as a case study wherein three responses are related to three control variables and two noise variables by mechanistic models. Designs for selected defect rates show the practicality and potential of the approach.

[1]  John H. Sheesley,et al.  Quality Engineering in Production Systems , 1988 .

[2]  Glenn L. Greig.  An assessment of high-order bounds for structural reliability☆ , 1992 .

[3]  Gordon J. Savage,et al.  Integrated robust design using probability of conformance metrics , 2002 .

[4]  R. H. Myers.  Generalized Linear Models: With Applications in Engineering and the Sciences , 2001 .

[5]  Geoff Tennant.  Design for Six Sigma: Launching New Products and Services Without Failure , 2002 .

[6]  Robert E. Melchers,et al.  Estimation of failure probabilities for intersections of non-linear limit states , 2001 .

[7]  Hid N. Grouni,et al.  Methods of structural safety , 1986 .

[8]  Robert E. Melchers,et al.  Structural Reliability: Analysis and Prediction , 1987 .

[9]  Yaacob Ibrahim,et al.  Multiple response robust design and yield maximization , 1999 .

[10]  Gordon J. Savage,et al.  PROBABILISTIC ROBUST DESIGN WITH MULTIPLE QUALITY CHARACTERISTICS , 2001 .

[11]  Kyung K. Choi,et al.  DESIGN POTENTIAL CONCEPT FOR RELIABILITY-BASED DESIGN OPTIMIZATION , 2000 .

[12]  Jose Luis Duarte Ribeiro,et al.  MINIMIZING MANUFACTURING AND QUALITY COSTS IN MULTIRESPONSE OPTIMIZATION , 2000 .

[13]  Theodore T. Allen,et al.  Six Sigma Literature: A Review and Agenda for Future Research , 2006, Qual. Reliab. Eng. Int..

[14]  G. O. Wesolowsky,et al.  On the computation of the bivariate normal integral , 1990 .

[15]  Gordon J. Savage,et al.  Continuous Taguchi—a model‐based approach to Taguchi's ‘quality by design’ with arbitrary distributions , 1998 .

[16]  Ida Gremyr.  Design for Six Sigma - From the perspective of Robust Design Methodology , 2003 .

[17]  P. B. Sharma,et al.  Reliability analysis of water distribution systems under uncertainty , 1995 .

[18]  Larry Walters,et al.  Six Sigma: is it Really Different? , 2005 .

[19]  Jiju Antony,et al.  Simultaneous Optimisation of Multiple Quality Characteristics in Manufacturing Processes Using Taguchi's Quality Loss Function , 2001 .

[20]  Fernando P. Bernardo,et al.  Quality costs and robustness criteria in chemical process design optimization , 2001 .

[21]  A. Charnes,et al.  Cost Horizons and Certainty Equivalents: An Approach to Stochastic Programming of Heating Oil , 1958 .

[22]  William Li,et al.  AN INTEGRATED METHOD OF PARAMETER DESIGN AND TOLERANCE DESIGN , 1999 .

[23]  Achintya Haldar,et al.  Efficient Algorithm for Stochastic Structural Optimization , 1989 .

[24]  Ravi Seshadri,et al.  Minimizing Cost of Multiple Response Systems by Probabilistic Robust Design , 2003 .

[25]  Byung Chai Lee,et al.  Development of a simple and efficient method for robust optimization , 2002 .

[26]  Richard Ruggles,et al.  Measuring the Cost of Quality , 1961 .

[27]  Thong Ngee Goh,et al.  The Role of Statistical Design of Experiments in Six Sigma: Perspectives of a Practitioner , 2002 .

[28]  Eric R. Ziegel,et al.  Quality engineering handbook , 1991 .

[29]  Saeed Maghsoodloo,et al.  Optimization of mechanical assembly tolerances by incorporating Taguchi's quality loss function , 1995 .

[30]  L. F. Hauglund,et al.  Least Cost Tolerance Allocation for Mechanical Assemblies with Automated Process Selection , 1990 .

[31]  Gordon J. Savage,et al.  Interrelating Quality and Reliability in Engineering Systems , 2002 .

[32]  Man-Hee Park,et al.  Optimal tolerance allocation with loss functions , 2000 .

[33]  Connie M. Borror,et al.  Robust Parameter Design: A Review , 2004 .

[34]  Kumaraswamy Ponnambalam,et al.  Probabilistic design of integrated circuits with correlated input parameters , 1999, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..