Layer of protection analysis (LOPA) is a semi‐quantitative risk evaluation tool. The methodology is widely used in setting safety integrity level (SIL) targets for safety instrumented systems (SIS). The methodology is often used to evaluate the adequacy of existing protective systems against corporate risk targets. The LOPA method is based on the use of conservative but representative estimates of the failure probability of protective systems. The results of these studies are presented to management for concurrence with the conclusions and for funding of recommendations. Management sometimes asks questions such as: What is the uncertainty in the results? How sensitive are the results to the underlying data and assumptions? How conservative is the LOPA methodology? Should additional independent protection layers be recommended from the LOPA study to compensate for uncertainty in the results?
[1]
Edward B. Haugen.
Probabilistic approaches to design
,
1968
.
[2]
D. Vose.
Risk Analysis: A Quantitative Guide
,
2000
.
[3]
P. R. Nelson.
The algebra of random variables
,
1979
.
[4]
R. A. Freeman,et al.
Technical Note: Error Propagation in Coupon Immersion Tests ✫
,
1992
.
[5]
William M. Goble,et al.
Analysis of pressure relief valve proof test data
,
2009
.
[6]
Raymond A. Freeman.
Using layer of protection analysis to define safety integrity level requirements
,
2007
.
[7]
Frank Crawley.
Layer of Protection Analysis: Simplified Process Risk Assessment Center for Chemical Process Safety of the American Institute of Chemical Engineers, 2003 270 pp, £88, ISBN 0 8169 0811 7
,
2004
.
[8]
Raymond A. Freeman.
Chemical plant design under conditions of risk
,
1980
.