Canadian Developments in Kiln Drying

The objective of this paper is to summarize recent trends related to industrial kiln drying with especial emphasis on the drying of softwood dimension lumber in Canada. The paper explores future trends by analyzing the current market condition and wood products requirements. The paper also summarizes current research developments in the area of kiln lumber drying that was published by Canadian universities and research institutes. This includes basic research, such as wood physics and computer simulation, and applied research, such as non-conventional drying strategies and new technologies and sensors. A last note is also included to mention a kiln supervisor tool that was developed in Canada to analyze information related to kiln performance indicators. The kiln supervisor provides important trends for mills aiming to optimize their drying processes and realize gains without substantial investments in capital and other resources.

[1]  D. Elustondo,et al.  RFV Drying Schedule Development for Thick Western Red Cedar Timbers , 2008 .

[2]  S. Avramidis,et al.  Evaluation of Three Semi-empirical Models for Superheated Steam Vacuum Drying of Timbers , 2003 .

[3]  Stavros Avramidis,et al.  Mechanosorptive Creep of Hemlock Under Conventional Drying: II. Description of Actual Creep Behavior in Drying Lumber , 2011 .

[4]  Peter Garrahan,et al.  Moisture meter correction factors for high temperature dimension lumber , 1988 .

[5]  S. Avramidis,et al.  Modeling Shrinkage Response to Tensile Stresses in Wood Drying II. Stress–Shrinkage Correlation in Restrained Specimens , 2010 .

[6]  Stavros Avramidis,et al.  Annual ring orientation effect and slope of grain in hemlock timber drying , 2004 .

[7]  L. Cai,et al.  Mechanism for De-aspirating Pits in Subalpine Fir by Steam Explosion Prior to Drying , 2009 .

[8]  S. Avramidis,et al.  On some physical properties of six aspen clones , 2005 .

[9]  Hongwei Wu,et al.  Artificial neural network and mathematical modeling comparative analysis of nonisothermal diffusion of moisture in wood , 2007, Holz als Roh- und Werkstoff.

[10]  Stavros Avramidis,et al.  Exploratory evaluation of oscillation drying for thick hemlock timbers , 2004 .

[11]  L. Cai,et al.  Gas Permeability of Wetwood and Normal Wood of Subalpine Fir in Relation to Drying , 2007 .

[12]  S. Avramidis,et al.  Wood Sorption Fractality in the Hygroscopic Range. Part II. New Model Development and Validation , 2007 .

[13]  Diego Elustondo,et al.  Lumber Quality Model: The theory , 2010 .

[14]  Stavros Avramidis,et al.  Drying Related Strain Development in Restrained Wood , 2008 .

[15]  S. Avramidis,et al.  Longitudinal air permeability of pinewood with beetle transmitted blue-stain , 2007, Holz als Roh- und Werkstoff.

[16]  T. Kudra,et al.  Dynamic Analysis of Drying Energy Consumption , 2004 .

[17]  Y. Fortin,et al.  Moisture Content-Water Potential Relationship of Sugar Maple and White Spruce Wood From Green to Dry Conditions , 1999 .

[18]  Stavros Avramidis,et al.  Softwood heating in radio frequency fields , 2011, European Journal of Wood and Wood Products.

[19]  Peter Garrahan,et al.  New air flow schedule reduces drying costs at E.B. Eddy , 1994 .

[20]  S. Avramidis,et al.  The sorption of water vapour by chemically modified softwood: analysis using various sorption models , 2005, Wood Science and Technology.

[21]  S. Avramidis,et al.  Detection of wet-pockets on the surface of Tsuga heterophylla (Raf.) Sarg. by near infrared (NIR) spectroscopy , 2009 .

[22]  D. Elustondo,et al.  Strategies to reduce energy consumption in kiln drying , 2007 .

[23]  S. S. Torres,et al.  Multiphysics modeling of vacuum drying of wood , 2011 .

[25]  Lazaros S. Iliadis,et al.  Predicting Wood Thermal Conductivity Using Artificial Neural Networks , 2007 .

[26]  S. Avramidis,et al.  Density and Moisture Profile Evolution during Timber Drying by CT Scanning Measurements , 2010 .

[27]  L. Cai,et al.  Impact of High-Temperature Schedules on Drying of Spruce and Pine , 2008 .

[28]  Diego Elustondo,et al.  Energy Consumption in Industrial Drying of Radiata Pine , 2012 .

[29]  S. Avramidis,et al.  Kiln-drying lumber quality of hybrid poplar clones , 2007 .

[30]  Mario Fafard,et al.  Modeling The Creep Behavior Of Wood Cantilever Loaded At Free End During Drying , 2005 .

[31]  S. Avramidis,et al.  A preliminary study on ultrasonic treatment effect on transverse wood permeability. , 2010 .

[32]  Liping Cai,et al.  Evaluating the Use of Humidification Systems During Heat Treatment of MPB Lumber , 2011 .

[33]  S. Avramidis,et al.  Modeling Shrinkage Response to Tensile Stresses in Wood Drying: I. Shrinkage-Moisture Interaction in Stress-Free Specimens , 2009 .

[34]  S. Avramidis,et al.  Radio Frequency Vacuum Drying of Wood. III. Two-Dimensional Model, Optimization, and Validation , 2003 .

[35]  Roger E. Hernández,et al.  A NMR study of water distribution in hardwoods at several equilibrium moisture contents , 2007, Wood Science and Technology.

[36]  Diego Elustondo,et al.  Non-Deterministic Description of Wood Radio Frequency Vacuum Drying , 2003 .

[37]  Y. Fortin,et al.  A global rheological model of wood cantilever as applied to wood drying , 2007, Wood Science and Technology.

[38]  S. Avramidis,et al.  A Novel Method of Measuring Moisture Content Distribution in Timber During Drying Using CT Scanning and Image Processing Techniques , 2012 .

[39]  Stavros Avramidis,et al.  Stability study of square timbers in simulated house frame service in Japan , 2005 .

[40]  Diego Elustondo,et al.  Simulated comparative analysis of sorting strategies for RFV drying , 2003 .

[41]  L. Cai,et al.  Impact of Mountain Pine Beetle (MPB) Attack on Drying Characteristics of Wood , 2008 .

[42]  Stavros Avramidis,et al.  Non-destructive Measurement of Moisture Distribution in Wood during Drying Using Digital X-ray Microscopy , 2008 .

[43]  S. Avramidis,et al.  Modeling Shrinkage Response to Tensile Stresses in Wood Drying III. Stress—Tensile Set Correlation in Short Pieces of Lumber , 2010 .

[44]  Liping Cai,et al.  An Estimation of Air Drying Time of Dimensional Lumber , 2012 .

[45]  Diego Elustondo,et al.  Opportunities to Reduce Energy Consumption in Softwood Lumber Drying , 2006 .

[46]  Vasile Minea,et al.  HEAT PUMPS FOR WOOD DRYING: NEW DEVELOPMENTS AND PRELIMINARY RESULTS , 2004 .

[47]  Martha Salcudean,et al.  Modelling of airflow and wood drying inside a kiln: A comprehensive approach , 2003 .

[48]  Derya Sevim Korkut,et al.  Effect of thermal modification on the properties of narrow-leaved ash and chestnut , 2012 .

[49]  D. Mckeever,et al.  Profile 2007: Softwood sawmills in the United States and Canada , 2007 .

[50]  Paul Fazio,et al.  Modeling of Moisture Behavior of Wood Planks in Nonvented Flat Roofs , 2003 .

[51]  Diego Elustondo,et al.  Industrial evaluation of re-dry strategy for softwood lumber , 2005 .

[52]  Western Dry Kiln Clubs,et al.  New temperature correction fractors for the portable resistance-type moisture meter , 1985 .

[53]  Stavros Avramidis,et al.  Acoustic constant property of Interior spruce (Picea spp.) from the central interior of British Columbia. , 2005 .

[54]  S. Avramidis,et al.  The demonstration of increased lumber value using optimized lumber sorting , 2004 .

[55]  Diego Elustondo,et al.  Comparative Analysis of Three Methods for Stochastic Lumber Drying Simulation , 2005 .

[56]  Stavros Avramidis,et al.  Radio-Frequency Heating Kinetics of Softwood Logs , 2011 .

[57]  J. Beaulieu,et al.  Study of geographical variation in kiln-drying behavior of plantation-grown white spruce , 2007 .

[58]  Lazaros S. Iliadis,et al.  Neural network prediction of bending strength and stiffness in western hemlock (Tsuga heterophylla Raf.) , 2007 .

[59]  Stephen D. Cosper,et al.  Remilling of salvaged wood siding coated with lead-based paint. Part 1. Lead exposure , 2005 .

[60]  M. Nabhani,et al.  Simulation of High-Temperature Drying of Wood , 2010 .

[61]  Mouloud Amazouz,et al.  Use of Multivariate Data Analysis for Lumber Drying Process Monitoring and Fault Detection , 2006, DMIN.

[62]  L. Cai,et al.  Modeling and Microscopic Analysis of Vaporization During High-Temperature Drying of Sub-Alpine Fir , 2011 .

[63]  Liping Cai,et al.  A Simulation of Wet Pocket Lumber Drying , 2008 .

[64]  Diego Elustondo,et al.  Stochastic numerical model for conventional kiln drying of timbers , 2003, Journal of Wood Science.

[65]  Alain Cloutier,et al.  Determination of the effective water conductivity of red pine sapwood , 2000, Wood Science and Technology.

[66]  Tadeusz Kudra,et al.  COMPUTER AIDED DRYING TECHNOLOGIES , 2001 .

[67]  Lazaros S. Iliadis,et al.  Wood-water sorption isotherm prediction with artificial neural networks: A preliminary study , 2005 .

[68]  Stavros Avramidis,et al.  Drying characteristics of hem-fir squares as affected by species and basic density presorting , 1996 .

[69]  Stavros Avramidis,et al.  Wood dielectric loss factor prediction with artificial neural networks , 2006, Wood Science and Technology.

[70]  Diego Elustondo,et al.  Estimation of green moisture content distribution in hemfir timber by stochastic simulation , 2004 .

[71]  S. Avramidis,et al.  Predicting Thermal Efficiency in Timber Radio Frequency Vacuum Drying , 2004 .

[72]  Diego Elustondo,et al.  Moisture content target optimization in lumber drying , 2011 .

[73]  S. Avramidis,et al.  Wet-pocket classification in Abies lasiocarpa using spectroscopy in the visible and near infrared range , 2010, European Journal of Wood and Wood Products.

[74]  Stavros Avramidis,et al.  Impact of juvenile wood on hemlock timber drying characteristics , 2007 .

[75]  R. Hernández,et al.  Development of a technique to determine the 3D elasticity tensor of wood as applied to drying stress modeling , 2008 .

[76]  S. Avramidis,et al.  The Effect of Wood Drying on Crystallinity and Microfibril Angle in Black Spruce (Picea mariana) , 2008 .

[77]  Hongwei Wu,et al.  Prediction of Timber Kiln Drying Rates by Neural Networks , 2006 .

[78]  Influence of the pore structure of wood on moisture desorption at high relative humidities , 2007 .

[79]  P. Lister,et al.  Temperature drop sensor for monitoring kiln drying of lumber , 2009 .

[80]  Stavros Avramidis,et al.  Evaluation of moisture content distribution in wood by soft X-ray imaging , 2008, Journal of Wood Science.

[81]  Diego Elustondo,et al.  MODEL TO ASSESS ENERGY CONSUMPTION IN INDUSTRIAL LUMBER KILNS , 2009 .

[82]  Ivaldo Pontes Jankowsky,et al.  Review of Wood Drying Research in Brazil: 1984–2004 , 2006 .

[83]  Alain Cloutier,et al.  Modeling Superheated Steam Vacuum Drying of Wood , 2004 .

[84]  S. Avramidis,et al.  Mechanosorptive Creep of Hemlock under Conventional Drying: I. The Determination of Free Shrinkage Strain , 2011 .

[85]  Diego Elustondo,et al.  NEW METHODOLOGY TO OPTIMIZE SORTING IN WOOD DRYING , 2010 .

[86]  Margareta Schmid.  Discussion of: “Artificial neural network and mathematical modeling comparative analysis of nonisothermal diffusion of moisture in wood” by Stavros Avramidis and Hongwei Wu , 2007, Holz als Roh- und Werkstoff.

[87]  L. Cai,et al.  Equalizing and conditioning spruce-pine-subalpine fir lumber , 2004 .

[88]  Roger E. Hernández,et al.  Effect of kiln-drying on the hardness and machining properties of tamarack wood for flooring. , 2009 .

[89]  Diego Elustondo,et al.  STOCHASTIC NUMERICAL MODEL FOR RADIO FREQUENCY VACUUM DRYING OF TIMBERS , 2002 .

[90]  Y. Fortin,et al.  Determination of the Effective Water Conductivity of Sugar Maple Sapwood and White Spruce Heartwood Under Vacuum , 1999 .