High-performance coatings for cutting tools

[1]  E. Broszeit,et al.  Beschichten nach den PVD‐Verfahren , 1978 .

[2]  H. Gabriel.  Verschleiß‐ und Korrosionsschutz durch ionen‐ und plasmagestützte Vakuumbeschichtungstechnologien (PVD‐Verfahren) , 1983 .

[3]  A. Matthews.  Titanium Nitride PVD Coating Technology , 1985 .

[4]  W. Münz.  Titanium aluminum nitride films: A new alternative to TiN coatings , 1986 .

[5]  O. Knotek,et al.  On the structure of (Ti, Al)N-PVD coatings , 1987 .

[6]  S. Barnett,et al.  Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness , 1987 .

[7]  H. Holleck.  Metastable coatings — Prediction of composition and structure , 1988 .

[8]  H. Jehn,et al.  Oxidation behavior of CrNx and (Cr,Al)Nx hard coatings , 1990 .

[9]  Y. Yamane,et al.  A study on the cutting performance of diamond coated tools―Tool wear of diamond coated tools in machining of CFRP , 1991 .

[10]  O. Lemmer,et al.  The development of the PVD coating TiAlN as a commercial coating for cutting tools , 1991 .

[11]  O. Lemmer,et al.  Industrial application of crystalline diamond-coated tools , 1991 .

[12]  A. Layyous,et al.  Al2O3-caoted cemented carbides: optimization of structure, number of layers and type of interlayer , 1992 .

[13]  O. Lemmer,et al.  A new technique for testing the impact load of thin films: the coating impact test , 1992 .

[14]  D. Bhat,et al.  Review of CVD TiN coatings for wear-resistant applications: deposition processes, properties and performance* , 1994 .

[15]  W. Sproul.  Multilayer, multicomponent, and multiphase physical vapor deposition coatings for enhanced performance , 1994 .

[16]  S. Vepřek,et al.  Novel thermodynamically stable and oxidation resistant superhard coating materials , 1996 .

[17]  Yasutoshi Makino,et al.  Phase transition of pseudobinary Cr–Al–N films deposited by magnetron sputtering method , 1997 .

[18]  G. Erkens,et al.  Comparative characterization of alumina coatings deposited by RF, DC and pulsed reactive magnetron sputtering , 1999 .

[19]  P. C. Jindal,et al.  Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning , 1999 .

[20]  R. Hauert,et al.  From Alloying to Nanocomposites—Improved Performance of Hard Coatings , 2000 .

[21]  Sakari Ruppi.  Advances in chemically vapour deposited wear resistant coatings , 2001 .

[22]  J. Patscheider,et al.  Structure-performance relations in nanocomposite coatings , 2001 .

[23]  S. Deevi,et al.  Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review , 2003 .

[24]  G. Erkens,et al.  Oxidation resistance of titanium–aluminium–silicon nitride coatings , 2003 .

[25]  A. Schütze,et al.  Pulsed plasma-assisted PVD sputter-deposited alumina thin films , 2003 .

[26]  M. Åstrand,et al.  PVD-Al2O3-coated cemented carbide cutting tools , 2004 .

[27]  Jow-Lay Huang,et al.  Effects of Aluminum Concentration on the Oxidation Behaviors of Reactively Sputtered TiAlN Films , 2004 .

[28]  F. Klocke,et al.  Development of a superlattice (Ti, Hf, Cr)N coating for cold metal forming applications , 2004 .

[29]  Zhi-jie Liu,et al.  Investigations of the bonding layer in commercial CVD coated cemented carbide inserts , 2005 .

[30]  M. Ahlgren,et al.  Influence of bias variation on residual stress and texture in TiAlN PVD coatings , 2005 .

[31]  V. Sarin,et al.  Development of moderate temperature CVD Al2O3 coatings , 2005 .

[32]  J. Endrino,et al.  Modern coatings in high performance cutting applications , 2006 .

[33]  R. Cremer,et al.  Nanocrystalline diamond coatings for machining , 2007 .

[34]  M. Herrmann,et al.  Novel aluminum-rich Ti1 − xAlxN coatings by LPCVD , 2008 .

[35]  Sakari Ruppi,et al.  Nanoindentation hardness, texture and microstructure of α-Al2O3 and κ-Al2O3 coatings , 2008 .

[36]  K. Bobzin,et al.  Mechanical properties and oxidation behaviour of (Al,Cr)N and (Al,Cr,Si)N coatings for cutting tools deposited by HPPMS , 2008 .

[37]  S. Vepřek,et al.  Industrial applications of superhard nanocomposite coatings , 2008 .

[38]  J. Alami,et al.  Advantages of nanocomposite coatings deposited by high power pulse magnetron sputtering technology , 2009 .

[39]  Andreas Schubert,et al.  Endbearbeitung von Aluminiummatrix-Verbundwerkstoffen durch Drehen , 2009 .

[40]  L. Wilde,et al.  Aluminum-rich TiAlCN coatings by Low Pressure CVD , 2010 .

[41]  K. Bobzin,et al.  Thermal stability of γ-Al2O3 coatings for challenging cutting operations , 2010 .

[42]  J. Kohlscheen,et al.  Coating Development for Gear Cutting Tools , 2010 .

[43]  S. Konstantinidis,et al.  High power pulsed magnetron sputtering: A review on scientific and engineering state of the art , 2010 .

[44]  Li-hui Zhu,et al.  High temperature oxidation behavior of Ti0.5Al0.5N coating and Ti0.5Al0.4Si0.1N coating , 2012 .

[45]  O. Ohnishi,et al.  Wear Resistance of Coating Films on Hob Teeth , 2012 .

[46]  Konstantinos-Dionysios Bouzakis,et al.  Cutting with coated tools: Coating technologies, characterization methods and performance optimization , 2012 .

[47]  B. Denkena,et al.  Significance of residual stress in PVD-coated carbide cutting tools , 2013 .

[48]  Z. Ban,et al.  The influence of residual thermal stresses on the mechanical properties of multilayer α-Al2O3/TiCxN1 − x coatings on WC/Co cutting tools , 2013 .

[49]  F. Klocke,et al.  Application of (Ti,Cr,Al,Si)N PVD Coatings in Hard Machining of PM High Speed Steel , 2013 .

[50]  R. M'Saoubi,et al.  Wear mechanisms of PVD-coated PCBN cutting tools , 2013 .

[51]  A. Ludwig,et al.  CrN/AlN nanolaminate coatings deposited via high power pulsed and middle frequency pulsed magnetron sputtering , 2014 .

[52]  K. Bobzin,et al.  Comparison of (Ti,Al)N and (Ti,Al)N/γ-Al2O3 coatings regarding tribological behavior and machining performance , 2014 .

[53]  K. Bouzakis,et al.  Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts , 2014 .

[54]  B. Denkena,et al.  Influence of the cutting edge preparation method on characteristics and performance of PVD coated carbide inserts in hard turning , 2014 .

[55]  P. Salvador,et al.  Architecture of PVD coatings for metalcutting applications: A review , 2014 .

[56]  E. Uhlmann,et al.  Machining of Carbon Fibre Reinforced Plastics , 2014 .

[57]  B. Karpuschewski,et al.  A NEW GENERATION OF PVD COATINGS FOR HIGH-PERFORMANCE GEAR HOBBING , 2014 .

[58]  Bruce L. Tai,et al.  International Conference on High Performance Cutting , HPC 2014 Minimum Quantity Lubrication ( MQL ) in Automotive Powertrain Machining , 2014 .

[59]  P. Ettmayer,et al.  1.01 – History of Hardmetals , 2014 .

[60]  M. Burghammer,et al.  Residual stress gradients in α-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media , 2015 .

[61]  K. Bobzin,et al.  Investigation on plastic behavior of HPPMS CrN, AlN and CrN/AlN-multilayer coatings using finite element simulation and nanoindentation , 2015 .

[62]  Rudolph F. Laubscher,et al.  Recent developments in sustainable manufacturing of gears: a review , 2016 .

[63]  C. Mitterer,et al.  Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties , 2016 .

[64]  A. Sharma,et al.  Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review , 2016 .

[65]  K. Bouzakis,et al.  Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools , 2016 .

[66]  R. Pitonak,et al.  Evolution of conventional hard coatings for its use on cutting tools , 2017 .