Cellular Helmet Liner Design through Bio-inspired Structures and Topology Optimization of Compliant Mechanism Lattices

The continuous development of sport technologies constantly demands advancements in protective headgear to reduce the risk of head injuries. This article introduces new cellular helmet liner designs through two approaches. The first approach is the study of energy-absorbing biological materials. The second approach is the study of lattices comprised of force-diverting compliant mechanisms. On the one hand, bio-inspired liners are generated through the study of biological, hierarchical materials. An emphasis is given on structures in nature that serve similar concussion-reducing functions as a helmet liner. Inspiration is drawn from organic and skeletal structures. On the other hand, compliant mechanism lattice (CML)-based liners use topology optimization to synthesize rubber cellular unit cells with effective positive and negative Poisson’s ratios. Three lattices are designed using different cellular unit cell arrangements, namely, all positive, all negative, and alternating effective Poisson’s ratios. The proposed cellular (bio-inspired and CML-based) liners are embedded between two polycarbonate shells, thereby, replacing the traditional expanded polypropylene foam liner used in standard sport helmets. The cellular liners are analyzed through a series of 2D extruded ballistic impact simulations to determine the best performing liner topology and its corresponding rubber hardness. The cellular design with the best performance is compared against an expanded polypropylene foam liner in a 3D simulation to appraise its protection capabilities and verify that the 2D extruded design simulations scale to an effective 3D design. © 2018 Indiana University-Purdue University Indianapolis; Published by SAE International. Downloaded from SAE International by Indiana Univ Purdue Univ Indianapolis, Tuesday, February 12, 2019

[1]  A Bührig-Polaczek,et al.  Biomimetic cellular metals—using hierarchical structuring for energy absorption , 2016, Bioinspiration & biomimetics.

[2]  Amaresh Chakrabarti,et al.  A functional representation for aiding biomimetic and artificial inspiration of new ideas , 2005, Artificial Intelligence for Engineering Design, Analysis and Manufacturing.

[3]  Terry A. Smith,et al.  Angular head motion with and without head contact: implications for brain injury , 2015 .

[4]  Thomas A. Gennarelli,et al.  Directional Dependence of Axonal Brain Injury due to Centroidal and Non-Centroidal Acceleration , 1987 .

[5]  Robert L. Nagel,et al.  Teaching Biomimicry With an Engineering-to-Biology Thesaurus , 2013 .

[6]  Andreas Bührig-Polaczek,et al.  Biomimetic Engineering : Learning from Nature ; Fruit Walls and Nutshells as Inspiration for the Development of Novel Materials , 2013 .

[7]  Yunhua Luo,et al.  Understanding how a sport-helmet protects the head from closed injury by virtual impact tests. , 2017, Bio-medical materials and engineering.

[8]  Sophia S. Yang,et al.  Designing Metallic Microlattices for Energy Absorber Applications , 2014 .

[9]  Faouzi Sakli,et al.  Design of a novel comfort liner for a motorcycle helmet , 2012 .

[10]  A. Tovar,et al.  Design of an Advanced Layered Composite for Energy Dissipation using a 3D-Lattice of Micro Compliant Mechanism , 2016 .

[11]  Ugo Galvanetto,et al.  Design of an innovative optimized motorcycle helmet , 2014 .

[12]  J. Vincent,et al.  Systematic technology transfer from biology to engineering , 2002, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[13]  Andres Tovar,et al.  Bio-Inspired Design of Lightweight and Protective Structures , 2016 .

[14]  Philippe Viot,et al.  Polypropylene foam behaviour under dynamic loadings : Strain rate, density and microstructure effects , 2009 .

[15]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[16]  T. Schaedler,et al.  Architected Cellular Materials , 2016 .

[17]  M. Ashby,et al.  Cellular Materials in Nature and Medicine , 2010 .

[18]  David Hui,et al.  Dynamic crash responses of bio-inspired aluminum honeycomb sandwich structures with CFRP panels , 2017 .

[19]  Andres Tovar,et al.  An efficient 3D topology optimization code written in Matlab , 2014 .

[20]  Lloyd V. Smith,et al.  An experimental and numerical study of softball to facemask impacts , 2017 .

[21]  Robert L. Nagel,et al.  EXPLORING THE USE OF FUNCTIONAL MODELS AS A FOUNDATION FOR BIOMIMETIC CONCEPTUAL DESIGN , 2007 .

[22]  Tongxi Yu,et al.  Methodology of analysing energy-absorption capacities , 2003 .

[23]  Ki-Ju Kang,et al.  New Cellular Metals with Enhanced Energy Absorption: Wire‐Woven Bulk Kagome (WBK)‐Metal Hollow Sphere (MHS) Hybrids , 2011 .

[24]  Francois Barthelat,et al.  Fabrication, testing and modeling of a new flexible armor inspired from natural fish scales and osteoderms , 2014, Bioinspiration & biomimetics.

[25]  Murray Mackay,et al.  The increasing importance of the biomechanics of impact trauma , 2007 .

[26]  M. Ashby,et al.  Cellular Solids: Energy absorption in cellular materials , 1997 .

[27]  Andrew Post,et al.  Peak linear and rotational acceleration magnitude and duration effects on maximum principal strain in the corpus callosum for sport impacts. , 2017, Journal of biomechanics.

[28]  Joel C. Najmon.  Design of compliant mechanism lattice structures for impact energy absorption , 2017 .

[29]  Hamid M. Lankarani,et al.  A finite element analysis of high-energy absorption cellular materials in enhancing passive safety of road vehicles in side-impact accidents , 2014 .

[30]  Shaw Voon Wong,et al.  A new motorcycle helmet liner material: The finite element simulation and design of experiment optimization , 2007 .

[31]  Thomas Speck,et al.  Impact behaviour of freeze-dried and fresh pomelo (Citrus maxima) peel: influence of the hydration state , 2015, Royal Society Open Science.

[32]  Kristin L. Wood,et al.  Bio-Inspired Design: An Overview Investigating Open Questions From the Broader Field of Design-by-Analogy , 2014 .

[33]  Olaf Andersen,et al.  Iron Based Cellular Structures – Status and Prospects , 2006 .

[34]  U. Jehring,et al.  Functionalized Metallic Hollow Sphere Structures , 2014 .

[35]  Joseph J. Beaman,et al.  History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing : Looking Back and Looking Ahead , .

[36]  Delfim Soares,et al.  Compressive properties and energy absorption of aluminum foams with modified cellular geometry , 2014 .

[37]  Amaresh Chakrabarti,et al.  An Empirical Evaluation of Novelty-SAPPhIRE Relationship , 2009 .

[38]  Yunbo Zhang,et al.  An interactive product customization framework for freeform shapes , 2017 .

[39]  M. Meyers,et al.  Keratin: Structure, mechanical properties, occurrence in biological organisms, and efforts at bioinspiration , 2016 .

[40]  Mark F. Horstemeyer,et al.  Constrained topological optimization of a football helmet facemask based on brain response , 2016 .

[41]  Jin-Eep Roh,et al.  Woodpecker-inspired shock isolation by microgranular bed , 2009 .

[42]  T. Saaty.  Relative measurement and its generalization in decision making why pairwise comparisons are central in mathematics for the measurement of intangible factors the analytic hierarchy/network process , 2008 .

[43]  Jun Wang,et al.  Freeform Honeycomb Structures , 2014, Comput. Graph. Forum.

[44]  Juhachi Oda,et al.  Mechanical Evaluation of the Skeletal Structure and Tissue of the Woodpecker and Its Shock Absorbing System , 2006 .

[45]  Shwe Soe,et al.  Mechanical characterisation of Duraform® Flex for FEA hyperelastic material modelling , 2014 .

[46]  William C Moss,et al.  Towards reducing impact-induced brain injury: lessons from a computational study of army and football helmet pads , 2012, Computer methods in biomechanics and biomedical engineering.

[47]  M. Meyers,et al.  Structural Design Elements in Biological Materials: Application to Bioinspiration , 2015, Advanced materials.

[48]  Yubo Fan,et al.  Why Do Woodpeckers Resist Head Impact Injury: A Biomechanical Investigation , 2011, PloS one.

[49]  Dwight Parkinson,et al.  Cumulative Effects of Concussion in High School AthletesIn Reply , 2003 .

[51]  A. Gilchrist,et al.  Bicycle helmet design , 2006 .

[52]  Philip Stephen Martin,et al.  Feasibility of optimising bicycle helmet design safety through the use of additive manufactured TPE cellular structures , 2015 .

[53]  Christine M Baugh,et al.  Clinicopathological Evaluation of Chronic Traumatic Encephalopathy in Players of American Football , 2017, JAMA.

[54]  Bing Pan,et al.  Morphological evolution and internal strain mapping of pomelo peel using X-ray computed tomography and digital volume correlation , 2018 .