Predicting the influence of strain on crack length measurements performed using the potential drop method

Abstract The potential drop (PD) crack growth measurement technique is sensitive to strain accumulation which is often erroneously interpreted as crack extension. When testing ductile materials these errors can be significant, but in many cases the optimum method of minimising or suppressing them remains unknown because it is extremely difficult to measure them experimentally in isolation from other sources of error, such non-ideal crack morphology. In this work a novel method of assessing the influence of strain on PD, using a sequentially coupled structural-electrical finite element (FE) model, has been developed. By comparing the FE predictions with experimental data it has been demonstrated that the proposed FE technique is extremely effective at predicting trends in PD due to strain. It has been used to identify optimum PD configurations for compact tension, C(T), and single edge notched tension, SEN(T), fracture mechanics specimens and it has been demonstrated that the PD configuration often recommended for C(T) specimens can be subject to large errors due to strain accumulation. In addition, the FE technique has been employed to assess the significance of strain after the initiation of stable tearing for a monotonically loaded C(T) specimen. The proposed FE technique provides a powerful tool for optimising the measurement of crack initiation and growth in applications where large strains are present, e.g. J-R curve and creep crack growth testing.

[1]  Reinhard Pippan,et al.  The Influence of Irregularities in the Crack Shape on the Crack Extension Measurement by Means of the Direct-Current-Potential-Drop Method , 1999 .

[2]  G. Arlt.  The sensitivity of strain gauges , 1978 .

[3]  Pär Ljustell.  The Effect of Large Scale Plastic Deformation on Fatigue Crack Length Measurement with the Potential Drop Method , 2011 .

[4]  Sebastian Münstermann,et al.  Characterizing Ductile Damage and Failure: Application of the Direct Current Potential Drop Method to Uncracked Tensile Specimens , 2014 .

[5]  Michael Brünig,et al.  Numerical analysis and modeling of large deformation and necking behavior of tensile specimens , 1998 .

[6]  T V Venkatsubramanian,et al.  An AC potential drop system for monitoring crack length , 1984 .

[7]  P. Ståhle,et al.  Crack length measurements with a potential drop method: A finite element simulation , 1993 .

[8]  G. P. Gibson.  The use of alternating current potential drop for determining J-crack resistance curves , 1987 .

[9]  Richard B. Zipin,et al.  Strain Gauges: Kinds and Uses , 1969 .

[10]  A. Saxena.  Electrical potential technique for monitoring subcritical crack growth at elevated temperatures , 1980 .

[11]  Kamran Nikbin,et al.  The Influence of Plasticity on Crack Length Measurements Using the Potential Drop Technique , 2015 .

[12]  Cesar A. Sciammarella,et al.  Experimental Mechanics of Solids , 2012 .

[13]  T. J. Baker,et al.  Application of the ac potential drop technique to the determination of R curves of tough ferritic steels , 1981 .

[14]  Peter B. Nagy,et al.  Sensitivity analysis of a directional potential drop sensor for creep monitoring , 2011 .

[15]  B Marandet,et al.  Experimental Verification of the J Ic and Equivalent Energy Methods for the Evaluation of the Fracture Toughness of Steels , 1977 .

[16]  A. Bakker.  A DC Potential Drop Procedure for Crack Initiation and R -Curve Measurements During Ductile Fracture Tests , 1985 .

[17]  Philip J. Withers,et al.  In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction , 2006 .

[18]  R. Garbacz,et al.  Introduction to electromagnetic fields , 1982, IEEE Antennas and Propagation Society Newsletter.

[19]  J. M. Lowes,et al.  The detection of slow crack growth in crack opening displacement specimens using an electrical potential method , 1971 .

[20]  G. A. Hartman,et al.  D-c electric-potential method applied to thermal/mechanical fatigue crack growth , 1987 .

[21]  Robert A. Ainsworth,et al.  High Temperature Component Life Assessment , 1994 .

[22]  Metallic materials. Unified method of test for the determination of quasistatic fracture toughness , 2022 .

[23]  V. Bicego,et al.  J-R Curve Testing Utilizing the Reversing Direct Current Electrical Potential Drop Method , 1990 .