论文信息 - Mechatronic Design and Control of a 3-RPS Parallel Manipulator

Mechatronic Design and Control of a 3-RPS Parallel Manipulator

This paper deals with the mechatronic design and control of a 3-RPS (Revolute-Prismatic-Spherical) parallel manipulator, which moving platform has three d.o.f.s, one translation and two rotations. Each of the three legs connects the fixed with the moving platform through a revolute and a spherical joint, respectively, while each prismatic joint consists of a DC electromechanical actuator. A prototype was built and experimentally tested by devoting particular attention to the control of the electric drives, as based on the technique of the Path-Step-Diagrams, which is commonly used for controlling pneumatic cylinders.

Giorgio Figliolini | Chiara Lanni | Pierluigi Rea | Tommaso Gallinelli

[1] Jee-Hwan Ryu. Parallel Manipulators, New Developments , 2008 .

[2] Qingsong Xu,et al. Kinematic analysis of a 3-PRS parallel manipulator , 2007 .

[3] Giorgio Figliolini,et al. Mechanical Design of a Novel Biped Climbing and Walking Robot , 2010 .

[4] Giorgio Figliolini,et al. MECHANICAL DESIGN OF A SIX LEGGED WALKING ROBOT WITH SARRUS-2 (3-RPS) LEG MECHANISM , 2009 .

[5] Marina Valles,et al. Mechatronic Development and Dynamic Control of a 3-DOF Parallel Manipulator , 2012 .

[6] Marco Ceccarelli,et al. Designing a robotic gripper for harvesting horticulture products , 2000, Robotica.

[7] M. Husty,et al. The 3-RPS parallel manipulator from an algebraic viewpoint , 2014 .

[8] Pierluigi Rea,et al. A new articulated leg for mobile robots , 2011, Ind. Robot.

[9] T. Shiau,et al. Direct kinematic analysis of a 3-PRS parallel mechanism , 2003 .

[10] Marco Ceccarelli,et al. Climbing stairs with EP-WAR2 biped robot , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).