Dynamic model of lithium polymer battery – Load resistor method for electric parameters identification

Abstract Maximum battery runtime and its transients behaviors are crucial in many applications. With accurate battery models in hand, circuit designers can evaluate the performance of its developments considering the influence of a finite source of energy which has a particular dynamics; as well as the energy storage systems can be optimized. First, this work describes a complete dynamic model of a lithium polymer battery. In the sequel a simple and novel procedure is used to obtain the electric parameters of adopted model with the advantage of using only one resistor to represent the battery load and a pc-connected multimeter. The methodology used to identify the parameters of the battery model is simple, clearly explained and can be applied to various types of batteries. Simulation and experimental results are presented and discussed, demonstrating the good performance of the proposed identification methodology.

[1]  Chunhua Zhang,et al.  The application of small unmanned aerial systems for precision agriculture: a review , 2012, Precision Agriculture.

[2]  Federico Baronti,et al.  Online Adaptive Parameter Identification and State-of-Charge Coestimation for Lithium-Polymer Battery Cells , 2014, IEEE Transactions on Industrial Electronics.

[3]  Teemu Lehmuspelto,et al.  Time-Domain Parameter Extraction Method for Thévenin-Equivalent Circuit Battery Models , 2014, IEEE Transactions on Energy Conversion.

[4]  N A Chaturvedi,et al.  Modeling, estimation, and control challenges for lithium-ion batteries , 2010, Proceedings of the 2010 American Control Conference.

[5]  Tao Wang,et al.  Optimal discharge and recharge control of battery-powered energy-aware systems , 2010, 49th IEEE Conference on Decision and Control (CDC).

[6]  Sarma B. K. Vrudhula,et al.  An Analytical High-Level Battery Model for Use in Energy Management of Portable Electronic Systems , 2001, ICCAD.

[7]  Mo-Yuen Chow,et al.  Comprehensive dynamic battery modeling for PHEV applications , 2010, IEEE PES General Meeting.

[8]  Tao Wang,et al.  Optimal control of multi-battery energy-aware systems , 2011, CDC-ECE.

[9]  Zonghai Chen,et al.  A method for the estimation of the battery pack state of charge based on in-pack cells uniformity analysis , 2014 .

[10]  Sekyung Han,et al.  A practical battery wear model for electric vehicle charging applications , 2013, 2013 IEEE Power & Energy Society General Meeting.

[11]  Luca Benini,et al.  Extending lifetime of portable systems by battery scheduling , 2001, Proceedings Design, Automation and Test in Europe. Conference and Exhibition 2001.

[12]  Il-Song Kim,et al.  Nonlinear State of Charge Estimator for Hybrid Electric Vehicle Battery , 2008, IEEE Transactions on Power Electronics.

[13]  Bin Jia,et al.  On-line battery state of charge estimation using Gauss-Hermite quadrature filter , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[14]  Christian Kral,et al.  Parameterization of an electrical battery model for dynamic system simulation in electric vehicles , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.

[15]  Vivek Agarwal,et al.  Development and Validation of a Battery Model Useful for Discharging and Charging Power Control and Lifetime Estimation , 2010, IEEE Transactions on Energy Conversion.

[16]  Wei Qiao,et al.  Online SOC and SOH estimation for multicell lithium-ion batteries based on an adaptive hybrid battery model and sliding-mode observer , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[17]  Anshul Kumar,et al.  Battery model for embedded systems , 2005, 18th International Conference on VLSI Design held jointly with 4th International Conference on Embedded Systems Design.

[18]  Rui Xiong,et al.  A data-driven based adaptive state of charge estimator of lithium-ion polymer battery used in electric vehicles , 2014 .

[19]  Min Chen,et al.  Accurate electrical battery model capable of predicting runtime and I-V performance , 2006, IEEE Transactions on Energy Conversion.

[20]  Taesic Kim,et al.  A Hybrid Battery Model Capable of Capturing Dynamic Circuit Characteristics and Nonlinear Capacity Effects , 2011 .

[21]  K.J. Tseng,et al.  Modelling of battery temperature effect on electrical characteristics of Li-ion battery in hybrid electric vehicle , 2011, 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems.

[22]  Guangjun Liu,et al.  Online estimation of model parameters and state-of-charge of Lithium-Ion battery using Unscented Kalman Filter , 2012, 2012 American Control Conference (ACC).

[23]  Ralph E. White,et al.  Power and life extension of battery-ultracapacitor hybrids , 2002 .

[24]  Jae-Ha Jang,et al.  Equivalent Circuit Evaluation Method of Lithium Polymer Battery Using Bode Plot and Numerical Analysis , 2011, IEEE Transactions on Energy Conversion.

[25]  G. S. Visweswaran,et al.  Battery aware dynamic scheduling for periodic task graphs , 2006, Proceedings 20th IEEE International Parallel & Distributed Processing Symposium.

[26]  James Marco,et al.  A Novel Method for the Parameterization of a Li-Ion Cell Model for EV/HEV Control Applications , 2012, IEEE Transactions on Vehicular Technology.

[27]  Suleiman Abu-Sharkh,et al.  Rapid test and non-linear model characterisation of solid-state lithium-ion batteries , 2004 .

[28]  Roger A. Dougal,et al.  Dynamic lithium-ion battery model for system simulation , 2002 .

[29]  Ondrej pinka,et al.  Energy-Aware Navigation and Guidance Algorithms for Unmanned Aerial Vehicles , 2011, RTCSA 2011.

[30]  Alessandro Matese,et al.  A flexible unmanned aerial vehicle for precision agriculture , 2012, Precision Agriculture.