Design of Broadband Highly Efficient Harmonic-Tuned Power Amplifier Using In-Band Continuous Class- ${\hbox{F}}^{-1}/{\hbox{F}}$ Mode Transferring

A novel methodology for designing high-frequency broadband harmonic-tuned power amplifiers (PAs) is presented in this paper. Specifically, a hybrid PA mode, transferring between continuous inverse Class-F and continuous Class-F, is for the first time employed to design PAs with optimal performance over more than-an-octave bandwidth. A GaN PA is designed and realized based on this mode-transferring operation using a three-stage transmission-line-based low-pass matching network. Simulation and experimental results show that an in-band PA-mode transferring between continuous Class- F-1 and continuous Class-F is successfully performed. The implemented PA achieves a measured 87% bandwidth from 1.3 to 3.3 GHz, while exhibiting a state-of-the-art performance of >;10-dB gain, 60%-84% efficiency, and 10-W output power throughout this band. Furthermore, modulated evaluation is carried out using a 300-kHz bandwidth 16-quadrature amplitude-modulation signal. Good linearity performance is measured with adjacent channel power ratio from -20 to -35 dBc and an error vector magnitude of 4%-9% over the entire bandwidth.

[1]  Lei Guan,et al.  A Simplified Broadband Design Methodology for Linearized High-Efficiency Continuous Class-F Power Amplifiers , 2012, IEEE Transactions on Microwave Theory and Techniques.

[2]  Bumman Kim,et al.  A Multimode/Multiband Envelope Tracking Transmitter With Broadband Saturated Amplifier , 2011, IEEE Transactions on Microwave Theory and Techniques.

[3]  Dimitrios Peroulis,et al.  Design of broadband high-efficiency power amplifier using in-band Class-F−1/F mode-transferring technique , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[4]  P. J. Tasker,et al.  A novel highly efficient broadband continuous class-F RFPA delivering 74% average efficiency for an octave bandwidth , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[5]  Christian Fager,et al.  An inverse class-F GaN HEMT power amplifier with 78% PAE at 3.5 GHz , 2009, 2009 European Microwave Conference (EuMC).

[6]  Georg Boeck,et al.  Broadband GaN switch mode class E power amplifier for UHF applications , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[7]  P. J. Tasker,et al.  Highly efficient operation modes in GaN power transistors delivering upwards of 81% efficiency and 12W output power , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.

[8]  Zoya Popovic,et al.  Switched-mode high-efficiency microwave power amplifiers in a free-space power-combiner array , 1998 .

[9]  F. Raab.  Maximum efficiency and output of class-F power amplifiers , 2001 .

[10]  A. L. Clarke,et al.  The Continuous Class-F Mode Power Amplifier , 2010, The 40th European Microwave Conference.

[11]  J. Lees,et al.  A Methodology for Realizing High Efficiency Class-J in a Linear and Broadband PA , 2009, IEEE Transactions on Microwave Theory and Techniques.

[12]  Steve C. Cripps,et al.  RF Power Amplifiers for Wireless Communications, Second Edition (Artech House Microwave Library (Hardcover)) , 2006 .

[13]  P. J. Tasker,et al.  The Continuous Inverse Class-F Mode With Resistive Second-Harmonic Impedance , 2012, IEEE Transactions on Microwave Theory and Techniques.

[14]  Slim Boumaiza,et al.  Design of a broadband and highly efficient 45W GaN power amplifier via simplified real frequency technique , 2010, MTT 2010.

[15]  D. Y. Wu,et al.  Design of a broadband and highly efficient 45W GaN power amplifier via simplified real frequency technique , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[16]  Yong-Xin Guo,et al.  High-efficiency concurrent dual-band class-F and inverse class-F power amplifier , 2011 .

[17]  G. Matthaei.  Tables of Chebyshev impedance–transforming networks of low-pass filter form , 1964 .

[18]  M. P. van der Heijden,et al.  A compact 12-watt high-efficiency 2.1-2.7 GHz class-E GaN HEMT power amplifier for base stations , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[19]  A. L. Clarke,et al.  On the Extension of the Continuous Class-F Mode Power Amplifier , 2011, IEEE Transactions on Microwave Theory and Techniques.

[20]  Bumman Kim,et al.  Investigation of a Class-J Power Amplifier With a Nonlinear $C_{\rm out}$ for Optimized Operation , 2010, IEEE Transactions on Microwave Theory and Techniques.

[21]  D. Peroulis,et al.  Design of Highly Efficient Broadband Class-E Power Amplifier Using Synthesized Low-Pass Matching Networks , 2011, IEEE Transactions on Microwave Theory and Techniques.

[22]  Bumman Kim,et al.  Switching Behavior of Class-E Power Amplifier and Its Operation Above Maximum Frequency , 2012, IEEE Transactions on Microwave Theory and Techniques.

[23]  Christian Fager,et al.  Design of a Highly Efficient 2–4-GHz Octave Bandwidth GaN-HEMT Power Amplifier , 2010, IEEE Transactions on Microwave Theory and Techniques.

[24]  Jangheon Kim,et al.  Saturated Power Amplifier Optimized for Efficiency Using Self-Generated Harmonic Current and Voltage , 2011, IEEE Transactions on Microwave Theory and Techniques.

[25]  P. J. Tasker,et al.  Exploring the design space for broadband pas using the novel “continuous inverse class-F mode” , 2011, 2011 41st European Microwave Conference.

[26]  Bumman Kim,et al.  A multimode/multiband envelope tracking transmitter with broadband saturated amplifier , 2011, 2011 10th International Conference on Telecommunication in Modern Satellite Cable and Broadcasting Services (TELSIKS).

[27]  Steve C Cripps,et al.  Rf power amplifier for wireless communications , 2014 .

[28]  P. Colantonio,et al.  Optimization of Class E Power Amplifier Design above Theoretical Maximum Frequency , 2008, 2008 European Microwave Integrated Circuit Conference.