Interfacial phenomena and formation of nano-particles in porous ZrB2–40 vol% B4C UHTC

[1]  Mehdi Shahedi Asl,et al.  Influence of silicon carbide addition on the microstructural development of hot pressed zirconium and titanium diborides , 2016 .

[2]  Mehdi Shahedi Asl,et al.  Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part I: Densification behavior , 2016 .

[3]  Mehdi Shahedi Asl,et al.  Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing , 2016 .

[4]  Mehdi Shahedi Asl,et al.  Temperature dependence of microstructure evolution during hot pressing of ZrB2–30 vol.% SiC composites , 2016 .

[5]  Mehdi Shahedi Asl,et al.  Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2-SiC composites , 2015 .

[6]  H. Sarpoolaky,et al.  Novel synthesis of ZrB2 powder by low temperature direct molten salt reaction , 2015 .

[7]  N. Glandut,et al.  Surface oxidation of porous ZrB2-SiC ceramic composites by continuous-wave ytterbium fibre laser , 2015 .

[8]  A. Nemati,et al.  Comprehensive study on the effect of SiC and carbon additives on the pressureless sintering and microstructural and mechanical characteristics of new ultra-high temperature ZrB2 ceramics , 2015 .

[9]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on sinterability and mechanical properties of ZrB2–25 vol% SiC UHTCs , 2015 .

[10]  M. Zakeri,et al.  Taguchi design and hardness optimization of ZrB2-based composites reinforced with chopped carbon fiber and different additives and prepared by SPS , 2015 .

[11]  Mehdi Shahedi Asl,et al.  Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part I: Densification behavior , 2015 .

[12]  M. Zakeri,et al.  Effect of open porosity on flexural strength and hardness of ZrB2-based composites , 2015 .

[13]  Mehdi Shahedi Asl,et al.  Microstructural development and mechanical properties of hot pressed SiC reinforced TiB2 based composite , 2015 .

[14]  Mehdi Shahedi Asl,et al.  A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites , 2015 .

[15]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on densification behavior of ZrB2–25 vol% SiC UHTCs , 2015 .

[16]  Mehdi Shahedi Asl,et al.  Taguchi analysis on the effect of hot pressing parameters on density and hardness of zirconium diboride , 2015 .

[17]  Mehdi Shahedi Asl,et al.  Influence of graphite nano-flakes on densification and mechanical properties of hot-pressed ZrB2–SiC composite , 2015 .

[18]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride , 2015 .

[19]  L. Jing,et al.  Effects of ZrB2 contents on the mechanical properties and thermal shock resistance of B4C–ZrB2 ceramics , 2015 .

[20]  Mehdi Shahedi Asl,et al.  Characterization of hot-pressed graphene reinforced ZrB 2 –SiC composite , 2015 .

[21]  Mehdi Shahedi Asl,et al.  Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure , 2015 .

[22]  Mehdi Shahedi Asl,et al.  A Processing-Microstructure Correlation in ZrB 2 -SiC Composites Hot-pressed under a Load of 10 MPa , 2015 .

[23]  Mehdi Shahedi Asl,et al.  A fractographical approach to the sintering process in porous ZrB2–B4C binary composites , 2015 .

[24]  Mehdi Shahedi Asl,et al.  Fractographical assessment of densification mechanisms in hot pressed ZrB2-SiC composites , 2014 .

[25]  Jiecai Han,et al.  Thermal shock behavior of porous ZrB2–SiC ceramics , 2013 .

[26]  V. Jayaram,et al.  Densification mechanisms during hot pressing of ZrB2-20 vol.% SiC composite , 2013 .

[27]  A. Domínguez-Rodríguez,et al.  Toughening of super-hard ultra-fine grained B4C densified by spark-plasma sintering via SiC addition , 2013 .

[28]  Xinghong Zhang,et al.  Microstructure and mechanical properties of ZrB2–SiC porous ceramic by camphene-based freeze casting , 2013 .

[29]  Q. Shen,et al.  Preparation and thermal conductivity characterization of ZrB2 porous ceramics fabricated by spark plasma sintering , 2013 .

[30]  N. Glandut,et al.  Surface densification of porous ZrB2–39 mol.% SiC ceramic composites by a laser process , 2012 .

[31]  R. Haber,et al.  Boron Carbide: Structure, Properties, and Stability under Stress , 2011 .

[32]  S. Guo,et al.  Transmission electron microscopy characterization of spark plasma sintered ZrB2 ceramic , 2010 .

[33]  L. Min,et al.  Sintering and Mechanical Properties of Mullite-Reinforced Boron Carbide Matrix Composite , 2009 .

[34]  S. Guo,et al.  Densification of ZrB2-based composites and their mechanical and physical properties: A review , 2009 .

[35]  G. Hilmas,et al.  Microwave sintering of a ZrB2–B4C particulate ceramic composite , 2008 .

[36]  William G. Fahrenholtz,et al.  Pressureless Sintering of Zirconium Diboride Using Boron Carbide and Carbon Additions , 2007 .

[37]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[38]  G. Hilmas,et al.  Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiC , 2007 .

[39]  A. Bellosi,et al.  Development and characterization of metal-diboride-based composites toughened with ultra-fine SiC particulates , 2005 .

[40]  Donald T. Ellerby,et al.  High‐Strength Zirconium Diboride‐Based Ceramics , 2004 .

[41]  F. Thévenot,et al.  Boron carbide ― a comprehensive review , 1990 .

[42]  B. T. Gorres,et al.  The crystal structure of trigonal diboron trioxide , 1970 .